Search found 334 matches

by bravootome
Sat Feb 27, 2021 1:14 pm
Forum: BB, Airsoft, and Pellet Guns
Topic: co2 tank to fill with air
Replies: 7
Views: 5429

Re: co2 tank to fill with air

i had not taken the paintball gun apart but it looks like a shitty job. it is no way better than my diy, it is all plastic and fragile, so am not sure it will hold 100 bar, and if i use 50 bar ( enough for decent power) the tank is to small and it may take 10 or more shoots ......
by bravootome
Sat Feb 27, 2021 10:39 am
Forum: BB, Airsoft, and Pellet Guns
Topic: co2 tank to fill with air
Replies: 7
Views: 5429

Re: co2 tank to fill with air

the bottle is actualy steel and has this marks on the bottom : -DOT E 10776 1800 - M4580- (THOUSE are written round circle ) and in the middle : 3 .01 and at the neck is written: 9 oz CO2 on the valve there is a screw with a 3000 nr. ( it may be the burst disk) so it is has a working pressure of 180...
by bravootome
Fri Feb 19, 2021 12:01 pm
Forum: BB, Airsoft, and Pellet Guns
Topic: co2 tank to fill with air
Replies: 7
Views: 5429

Re: co2 tank to fill with air

Avoid beating off in public. It'll get you on a list. either the tank is extremely beaten up , or it's intended only for liquid CO2 and has not been high pressure rated. no, the tank has some markings stampted, but i could not read them clearly .... it is very heavy for his size and aluminum materi...
by bravootome
Fri Feb 19, 2021 11:13 am
Forum: BB, Airsoft, and Pellet Guns
Topic: co2 tank to fill with air
Replies: 7
Views: 5429

co2 tank to fill with air

hi, i got a sh 9 on( or oz ..) co2 paintball tank ( with the gun too) . the tank is made of Al and i want to know if and to what pressure (bar) can i fill it with my hill pump - with air. ( as i know co2 is more "low pressure than air"). i can not read the markings on it as it is pretty beat off ......
by bravootome
Fri Jan 15, 2021 1:05 pm
Forum: BB, Airsoft, and Pellet Guns
Topic: is this a hq hand pump ?
Replies: 4
Views: 4474

Re: is this a hq hand pump ?

according to this : https://eu.novritsch.com/ammunition-overview/ ( and a video) 6.44 mm bbs are used in airsoft guns
so a 6,35 pellet must work even a barrel is 6.01
by bravootome
Fri Jan 15, 2021 8:14 am
Forum: BB, Airsoft, and Pellet Guns
Topic: 4,2 mm pipe for 4.5 ammo
Replies: 15
Views: 9535

Re: 4,2 mm pipe for 4.5 ammo

jackssmirkingrevenge wrote:
Wed Jan 13, 2021 6:19 am


I wonder if it would prompt a visit from the powers that be as it goes through customs...

what do you mean ?
by bravootome
Fri Jan 15, 2021 7:55 am
Forum: BB, Airsoft, and Pellet Guns
Topic: is this a hq hand pump ?
Replies: 4
Views: 4474

Re: is this a hq hand pump ?

I've never seen one in the flesh but most people seem to think it's pretty good . i got it , and in compare with the china one - this pump is at another level . indeed with same money i could of brought a electric hpa compressor, but ......it is more "handy" . i am talking about the mk4 hill hand h...
by bravootome
Sat Jan 09, 2021 10:26 am
Forum: BB, Airsoft, and Pellet Guns
Topic: is this a hq hand pump ?
Replies: 4
Views: 4474

is this a hq hand pump ?

as i brought a china pcp hand pump, and got problems with it, i want to buy a HQ pump. main reason is the china pump does put oil and water into the tank. this is the only branded pump for sale @ here ,and i want to get it, does it worth it ? it costs @ 200 euro............ https://www.emag.ro/pompa...
by bravootome
Sat Jan 09, 2021 9:07 am
Forum: BB, Airsoft, and Pellet Guns
Topic: 4,2 mm pipe for 4.5 ammo
Replies: 15
Views: 9535

Re: 4,2 mm pipe for 4.5 ammo

i ve not "tuned " the barrel as it looks like inaccuracy still comes from the dust, but the dust goes in from the brand new pcp hand pump, witch is exactly what i got it for - to have no dust. it is vaseline mixted with water . as the pump is a brand new china made, it has no filter, and there is no...
by bravootome
Thu Jan 07, 2021 2:01 pm
Forum: BB, Airsoft, and Pellet Guns
Topic: 4,2 mm pipe for 4.5 ammo
Replies: 15
Views: 9535

Re: 4,2 mm pipe for 4.5 ammo

Totally stupid idea, maybe, for use of bbs... What if you were to bend the barrel down slightly, right at the start by the breech? Would that perhaps force a consistent contact between bb and the top of the barrel, effectively guarantee a hopup effect even with the extra speed you're generating? A ...
by bravootome
Thu Jan 07, 2021 10:31 am
Forum: BB, Airsoft, and Pellet Guns
Topic: 4,2 mm pipe for 4.5 ammo
Replies: 15
Views: 9535

Re: 4,2 mm pipe for 4.5 ammo

i was thinking ( not sure i can find my words, but....) to squeeze the part where the bb seats in the barrel , about 5 cm, from outside -in ( like fx barrels ) let me explain why : the bb sets down into the barrel so when it is blasted with air it may go any where , it needs to be caught in the midd...
by bravootome
Wed Jan 06, 2021 10:38 am
Forum: BB, Airsoft, and Pellet Guns
Topic: 4,2 mm pipe for 4.5 ammo
Replies: 15
Views: 9535

Re: 4,2 mm pipe for 4.5 ammo

That sounds tight. I used some stainless pipe from Mcmaster https://www.mcmaster.com/tubing/metal-tubing-for-flow/smooth-bore-seamless-stainless-steel-tubing/id~0-183/ at 150psi I still had to slightly open the loading end of the tube to pre-compress the skirt a bit. Dome head pellets seem to be mo...
by bravootome
Tue Jan 05, 2021 11:34 am
Forum: BB, Airsoft, and Pellet Guns
Topic: 4,2 mm pipe for 4.5 ammo
Replies: 15
Views: 9535

4,2 mm pipe for 4.5 ammo

is a 4,2 mm brass pipe ( inside diam) good for 4,5 lead pellets?
how accurate will it be as there are no grooves ? does it worth to try ?
by bravootome
Mon Jan 04, 2021 11:02 am
Forum: BB, Airsoft, and Pellet Guns
Topic: New spring powered airsoft
Replies: 12
Views: 15676

Re: New spring powered airsoft

very well made, but isnt it too much for what it is ? i mean you made it more complicated then a Ak firearm machinegun... witch make it hard to operate in the backyard ....

but it is indeed a piece of mechanics ...., show us some target shooting/soda cans
by bravootome
Sun Jan 03, 2021 7:35 am
Forum: General How-To & Discussion
Topic: about accuracy
Replies: 29
Views: 27231

Re: about accuracy

well it looks like when i clean the barrel after every shoot, it shoot hole to hole by 22 m ( where my target is set ) . So i can see small black particles inside the barrel when accuracy goes crazy. i am in process of cleaning again the airtank , it looks like the particles are from the welding.......