i agree with jackssmirkingrevenge about the suppressor

i'm no expert but most combustion cannons produce much more pressure and and sharply than pneumatic . i would look over the fitting for little dents /dings from the drop and look for cracks if you see any id cover then with some PVC cement and DUCK TAPE (hehe have to have duck tape) obviously if the...

love that stock

any chance of a shooting video?

well what i would do is cut the fore grip off and attach a vertical or 45 degree angled one you can force them on sometimes and then carve a good grove then just screw in place. well done so far hope you keep us updated .

loving the stock "aug" by any chance

i got a plastic bottle to 250psi then my bottle slid off my rig but those 3lt containers aren't designed for high pressures i suggest a fire extinguisher/paintball tank or a large piece of high pressure PVC pipe :D :D :D How did the plastic bottle slide off your rig after reaching 250psi? Was it sc...

when you load a airsoft pistol mag normally you have a tab on the plastic nub that pushes the bbs you could incorporate this into your design this allows the spring to stay in the mag then all you need is some sort of breach in the mag to load the ammo in

as far as i know there are three pipes coming out from the unit one is sealed as that where a repair guy would re gas the system this i don't think you need. then there is one output to loop and one input from loop i think its those two you need to get a large amount of pressure then you should comp...

yea i am just going for a high capacity 7.4v and a 11.1v lipos. one of each and if i still don't have enough juice i will consider doing this. i will instead do a 16 gauge rewiring a mosfet and inline voltage alarms might get a deepfire bucking, cylinder, cylinder head, piston head and a full metal ...

im also confused on that post. im wondering does anybody have some suggestions on my diagram. im thinking of putin voltage alarm on each battery but dont know how and where to put them I was thinking of putting them between the balancing board and the battery using a y splitter. what do you people w...

OK here is what i have come up with so far

i just had a cool idea where for normal rof is acceptable i use 7.4v and then in short cqb situations bump it up to 11.1. i have found a good deal on 11.1 lipos on ebay 2 2200mah 20c 3s packs for £21.99 how many cells do you recommend 2/3 what is the minimum c rating recurred for airsoft guns? shoul...

any of these any good: http://www.ebay.co.uk/itm/30C-7-4-V-2800mAh-LiPo-Battery-For-RC-Helicopter-Plane-/251028209464?pt=UK_ToysGames_RadioControlled_JN&hash=item3a72727f38 http://www.ebay.co.uk/itm/7-4V-4000mAh-20C-lipo-lLi-poly-RC-Battery-AKKU-RC-Car-Scale-Boat-FOR-Tiger-Wing-/180749403659?pt=UK_T...

what internals do i need? im using lipo because i don't like nickle metal hydride battery's and there over priced. i found two lipos for the price of one standard battery with half the capacity. in my src g36 gen2 I have a v3 gearbox with full metal (high torque so they say) gears. would these inter...