CO2 tank - Revision history

Benstern: spelling

2007-06-03T05:57:17Z

spelling

← Older revision		Revision as of 00:57, 3 June 2007
Line 1:		Line 1:
	'''CO2 tanks''' are used as pressure sources for pneumatic launchers. There are two principal kinds, paintball tanks and bulk tanks. In addition there are 12g [[CO2 cartridge]]s, which are only good for one fill of any ~~sizeable~~ chamber, and usually not cost effective.		'''CO2 tanks''' are used as pressure sources for pneumatic launchers. There are two principal kinds, paintball tanks and bulk tanks. In addition there are 12g [[CO2 cartridge]]s, which are only good for one fill of any sizable chamber, and usually not cost effective.

	The pressure of ~800 psi needs to be regulated down to a pressure suitable for spudguns, using a [[pressure regulator]] between the tank and chamber. Regulators are made to connect directly both to paintball and bulk tanks.		The pressure of ~800 psi needs to be regulated down to a pressure suitable for spudguns, using a [[pressure regulator]] between the tank and chamber. Regulators are made to connect directly both to paintball and bulk tanks.
Line 10:		Line 10:
	===Filling===		===Filling===

	A paintball tank is usually filled from a bulk tank that has a built-in siphon, which will let out liquid CO2. A paintball [[fill station]] is connected to the bulk tank and has the ~~neccessary~~ valves and fittings to connect it to the paintball tank.		A paintball tank is usually filled from a bulk tank that has a built-in siphon, which will let out liquid CO2. A paintball [[fill station]] is connected to the bulk tank and has the necessary valves and fittings to connect it to the paintball tank.

	The tank needs to be cooled down before filling, the the internal pressure of the tank will then be less than that of the bulk tank, and the pressure will transfer liquid CO2 to the paintball tank. The tank should be weighed when filling, and not filled to a greater weight than the tank is made for. If the tank is filled to excess, the pressure can ~~rize~~ rapidly with increased temperature and rupture the burst disk of the tank. A full tank contains about 1/3 of its volume in liquid CO2.		The tank needs to be cooled down before filling, the the internal pressure of the tank will then be less than that of the bulk tank, and the pressure will transfer liquid CO2 to the paintball tank. The tank should be weighed when filling, and not filled to a greater weight than the tank is made for. If the tank is filled to excess, the pressure can rise rapidly with increased temperature and rupture the burst disk of the tank. A full tank contains about 1/3 of its volume in liquid CO2.

	===Fittings===		===Fittings===
Line 26:		Line 26:
	===Fittings===		===Fittings===

	In the US and Canada, most CO2 bulk tanks have male CGA 320 threads on the output, this thread is used only for CO2. In Europe the thread is designated as W 21.8 x 1/14", and is identical to that of European oxygen tanks, so O2 regulators can be used on CO2 cylinders if ~~neccessary~~.		In the US and Canada, most CO2 bulk tanks have male CGA 320 threads on the output, this thread is used only for CO2. In Europe the thread is designated as W 21.8 x 1/14", and is identical to that of European oxygen tanks, so O2 regulators can be used on CO2 cylinders if necessary.

	===Usage===		===Usage===

	Bulk ~~taks~~ can be used as pressure sources directly, or for filling paintball CO2 tanks using a CO2 [[fill station]]. For the latter, a tank with a siphon tube is useful since it will siphon liquid CO2 from the bottom of the tank. When filling from a tank without a siphon, it must be turned upside down to allow liquid CO2 through the valve. Conversely, a tank with a siphon must be turned upside down if it is to be used as a pressure source. CO2 fire extinguishers usually have siphon tubes installed.		Bulk tanks can be used as pressure sources directly, or for filling paintball CO2 tanks using a CO2 [[fill station]]. For the latter, a tank with a siphon tube is useful since it will siphon liquid CO2 from the bottom of the tank. When filling from a tank without a siphon, it must be turned upside down to allow liquid CO2 through the valve. Conversely, a tank with a siphon must be turned upside down if it is to be used as a pressure source. CO2 fire extinguishers usually have siphon tubes installed.

	[[category:Accessories]]		[[category:Accessories]]

Boilingleadbath: categorized

2007-04-15T11:53:05Z

categorized

← Older revision		Revision as of 06:53, 15 April 2007
Line 31:		Line 31:

	Bulk taks can be used as pressure sources directly, or for filling paintball CO2 tanks using a CO2 [[fill station]]. For the latter, a tank with a siphon tube is useful since it will siphon liquid CO2 from the bottom of the tank. When filling from a tank without a siphon, it must be turned upside down to allow liquid CO2 through the valve. Conversely, a tank with a siphon must be turned upside down if it is to be used as a pressure source. CO2 fire extinguishers usually have siphon tubes installed.		Bulk taks can be used as pressure sources directly, or for filling paintball CO2 tanks using a CO2 [[fill station]]. For the latter, a tank with a siphon tube is useful since it will siphon liquid CO2 from the bottom of the tank. When filling from a tank without a siphon, it must be turned upside down to allow liquid CO2 through the valve. Conversely, a tank with a siphon must be turned upside down if it is to be used as a pressure source. CO2 fire extinguishers usually have siphon tubes installed.

			[[category:Accessories]]

GalFisk: +fittings

2006-03-03T22:54:46Z

+fittings

← Older revision		Revision as of 17:54, 3 March 2006
Line 13:		Line 13:

	The tank needs to be cooled down before filling, the the internal pressure of the tank will then be less than that of the bulk tank, and the pressure will transfer liquid CO2 to the paintball tank. The tank should be weighed when filling, and not filled to a greater weight than the tank is made for. If the tank is filled to excess, the pressure can rize rapidly with increased temperature and rupture the burst disk of the tank. A full tank contains about 1/3 of its volume in liquid CO2.		The tank needs to be cooled down before filling, the the internal pressure of the tank will then be less than that of the bulk tank, and the pressure will transfer liquid CO2 to the paintball tank. The tank should be weighed when filling, and not filled to a greater weight than the tank is made for. If the tank is filled to excess, the pressure can rize rapidly with increased temperature and rupture the burst disk of the tank. A full tank contains about 1/3 of its volume in liquid CO2.

			===Fittings===

			The tank valve has a male ASA thread on the output, a paintball tank adapter connects this to 1/8" NPT which is the standard thread for paintball fittings. There are also female [[paintball regulator]]s which screw directly onto the ASA thread.

			===Usage===

	=Bulk tanks=		=Bulk tanks=

GalFisk: +image

2006-03-03T22:42:25Z

+image

← Older revision		Revision as of 17:42, 3 March 2006
Line 5:		Line 5:

	=Paintball tanks=		=Paintball tanks=
			[[Image:CO2 paintball tank.jpg\|thumb\|right\|300px\|A CO2 paintball tank]]
	Paintball tanks come in sizes from 4 to 20 oz, which is the weight of the CO2 the tank can hold. The tank valve is either a pin valve, which is opened by screwing the tank into the fitting, or an on/off valve which can be opened and closed manually. They have a burst disk safety valve that will break and vent the CO2 if the tank pressure rises above a certain limit.		Paintball tanks come in sizes from 4 to 20 oz, which is the weight of the CO2 the tank can hold. The tank valve is either a pin valve, which is opened by screwing the tank into the fitting, or an on/off valve which can be opened and closed manually. They have a burst disk safety valve that will break and vent the CO2 if the tank pressure rises above a certain limit.

GalFisk: /* Bulk tanks */ +fittings, usage

2006-03-03T22:33:21Z

Bulk tanks: +fittings, usage

← Older revision		Revision as of 17:33, 3 March 2006
Line 18:		Line 18:
	Bulk tanks come in a variety of sizes, and are sold for use in beer tapping systems, aquariums, welding, as fire extinguishers and more. Empty tanks are either swapped for full ones or refilled for a certain fee.		Bulk tanks come in a variety of sizes, and are sold for use in beer tapping systems, aquariums, welding, as fire extinguishers and more. Empty tanks are either swapped for full ones or refilled for a certain fee.

	~~{{stub}}~~		===Fittings===

			In the US and Canada, most CO2 bulk tanks have male CGA 320 threads on the output, this thread is used only for CO2. In Europe the thread is designated as W 21.8 x 1/14", and is identical to that of European oxygen tanks, so O2 regulators can be used on CO2 cylinders if neccessary.

			===Usage===

			Bulk taks can be used as pressure sources directly, or for filling paintball CO2 tanks using a CO2 [[fill station]]. For the latter, a tank with a siphon tube is useful since it will siphon liquid CO2 from the bottom of the tank. When filling from a tank without a siphon, it must be turned upside down to allow liquid CO2 through the valve. Conversely, a tank with a siphon must be turned upside down if it is to be used as a pressure source. CO2 fire extinguishers usually have siphon tubes installed.

GalFisk: /* Bulk tanks */

2006-02-28T13:30:11Z

Bulk tanks

← Older revision		Revision as of 08:30, 28 February 2006
Line 17:		Line 17:
	[[Image:CO2 bulk tank.jpg\|thumb\|right\|180px\|A CO2 bulk tank]]		[[Image:CO2 bulk tank.jpg\|thumb\|right\|180px\|A CO2 bulk tank]]
	Bulk tanks come in a variety of sizes, and are sold for use in beer tapping systems, aquariums, welding, as fire extinguishers and more. Empty tanks are either swapped for full ones or refilled for a certain fee.		Bulk tanks come in a variety of sizes, and are sold for use in beer tapping systems, aquariums, welding, as fire extinguishers and more. Empty tanks are either swapped for full ones or refilled for a certain fee.

			{{stub}}

GalFisk: CO2 Tank moved to CO2 tank

2006-02-28T12:54:11Z

CO2 Tank moved to CO2 tank

← Older revision	Revision as of 07:54, 28 February 2006
(No difference)

GalFisk: more formatting

2006-02-28T12:09:46Z

more formatting

← Older revision		Revision as of 07:09, 28 February 2006
Line 8:		Line 8:
	Paintball tanks come in sizes from 4 to 20 oz, which is the weight of the CO2 the tank can hold. The tank valve is either a pin valve, which is opened by screwing the tank into the fitting, or an on/off valve which can be opened and closed manually. They have a burst disk safety valve that will break and vent the CO2 if the tank pressure rises above a certain limit.		Paintball tanks come in sizes from 4 to 20 oz, which is the weight of the CO2 the tank can hold. The tank valve is either a pin valve, which is opened by screwing the tank into the fitting, or an on/off valve which can be opened and closed manually. They have a burst disk safety valve that will break and vent the CO2 if the tank pressure rises above a certain limit.

	==Filling==		===Filling===

	A paintball tank is usually filled from a bulk tank that has a built-in siphon, which will let out liquid CO2. A paintball [[fill station]] is connected to the bulk tank and has the neccessary valves and fittings to connect it to the paintball tank.		A paintball tank is usually filled from a bulk tank that has a built-in siphon, which will let out liquid CO2. A paintball [[fill station]] is connected to the bulk tank and has the neccessary valves and fittings to connect it to the paintball tank.

GalFisk: formatting

2006-02-28T12:09:14Z

formatting

← Older revision		Revision as of 07:09, 28 February 2006
Line 4:		Line 4:


	===Paintball tanks===		=Paintball tanks=

	Paintball tanks come in sizes from 4 to 20 oz, which is the weight of the CO2 the tank can hold. The tank valve is either a pin valve, which is opened by screwing the tank into the fitting, or an on/off valve which can be opened and closed manually. They have a burst disk safety valve that will break and vent the CO2 if the tank pressure rises above a certain limit.		Paintball tanks come in sizes from 4 to 20 oz, which is the weight of the CO2 the tank can hold. The tank valve is either a pin valve, which is opened by screwing the tank into the fitting, or an on/off valve which can be opened and closed manually. They have a burst disk safety valve that will break and vent the CO2 if the tank pressure rises above a certain limit.

	====Filling====		==Filling==

	A paintball tank is usually filled from a bulk tank that has a built-in siphon, which will let out liquid CO2. A paintball [[fill station]] is connected to the bulk tank and has the neccessary valves and fittings to connect it to the paintball tank.		A paintball tank is usually filled from a bulk tank that has a built-in siphon, which will let out liquid CO2. A paintball [[fill station]] is connected to the bulk tank and has the neccessary valves and fittings to connect it to the paintball tank.
Line 14:		Line 14:
	The tank needs to be cooled down before filling, the the internal pressure of the tank will then be less than that of the bulk tank, and the pressure will transfer liquid CO2 to the paintball tank. The tank should be weighed when filling, and not filled to a greater weight than the tank is made for. If the tank is filled to excess, the pressure can rize rapidly with increased temperature and rupture the burst disk of the tank. A full tank contains about 1/3 of its volume in liquid CO2.		The tank needs to be cooled down before filling, the the internal pressure of the tank will then be less than that of the bulk tank, and the pressure will transfer liquid CO2 to the paintball tank. The tank should be weighed when filling, and not filled to a greater weight than the tank is made for. If the tank is filled to excess, the pressure can rize rapidly with increased temperature and rupture the burst disk of the tank. A full tank contains about 1/3 of its volume in liquid CO2.

	===Bulk tanks===		=Bulk tanks=
	[[Image:CO2 bulk tank.jpg\|thumb\|right\|180px\|A CO2 bulk tank]]		[[Image:CO2 bulk tank.jpg\|thumb\|right\|180px\|A CO2 bulk tank]]
	Bulk tanks come in a variety of sizes, and are sold for use in beer tapping systems, aquariums, welding, as fire extinguishers and more. Empty tanks are either swapped for full ones or refilled for a certain fee.		Bulk tanks come in a variety of sizes, and are sold for use in beer tapping systems, aquariums, welding, as fire extinguishers and more. Empty tanks are either swapped for full ones or refilled for a certain fee.

GalFisk: +bulk tank info (incomplete)

2006-02-25T17:42:24Z

+bulk tank info (incomplete)

← Older revision		Revision as of 12:42, 25 February 2006
Line 15:		Line 15:

	===Bulk tanks===		===Bulk tanks===
			[[Image:CO2 bulk tank.jpg\|thumb\|right\|180px\|A CO2 bulk tank]]
			Bulk tanks come in a variety of sizes, and are sold for use in beer tapping systems, aquariums, welding, as fire extinguishers and more. Empty tanks are either swapped for full ones or refilled for a certain fee.