PVC Glue - Revision history

Benstern: added and fixed links

2008-06-01T15:41:12Z

added and fixed links

← Older revision		Revision as of 10:41, 1 June 2008
Line 3:		Line 3:
	== How to use PVC glue ==		== How to use PVC glue ==

	PVC glue is to be applied liberally to all PVC/CPVC joints, pipes or fittings (by use of a brush) where they are going to be connected together. In most cases, a brush is supplied with the glue. Application of glue should be done immediately after the application of PVC primer. (Most PVC glue manufacturers recommend that the cleaner not be allowed to dry before gluing the joint.) As always, the directions on the can provide the best advice on the process of [[solvent ~~weld~~]].		PVC glue is to be applied liberally to all PVC/CPVC joints, pipes or fittings (by use of a brush) where they are going to be connected together. In most cases, a brush is supplied with the glue. Application of glue should be done immediately after the application of PVC [[primer]]. (Most PVC glue manufacturers recommend that the cleaner not be allowed to dry before gluing the joint.) As always, the directions on the can provide the best advice on the process of [[solvent welding]].

	== Health and Safety ==		== Health and Safety ==

Jimmy101: fixed some links

2007-08-08T17:23:51Z

fixed some links

← Older revision		Revision as of 12:23, 8 August 2007
Line 1:		Line 1:
	PVC Glue is a mixture of PVC disolved in solvent and is used to [[weld~~\|solvent welding~~]] two pieces of PVC together.		PVC Glue is a mixture of PVC disolved in solvent and is used to [[solvent_welding\|weld]] two pieces of PVC together.

	== How to use PVC glue ==		== How to use PVC glue ==

	PVC glue is to be applied liberally to all PVC/CPVC joints, pipes or fittings (by use of a brush) where they are going to be connected together. In most cases, a brush is supplied with the glue. Application of glue should be done immediately after the application of PVC primer. (Most PVC glue manufacturers recommend that the cleaner not be allowed to dry before gluing the joint.) As always, the directions on the can provide the best advice on the process of [[solvent ~~welding~~]].		PVC glue is to be applied liberally to all PVC/CPVC joints, pipes or fittings (by use of a brush) where they are going to be connected together. In most cases, a brush is supplied with the glue. Application of glue should be done immediately after the application of PVC primer. (Most PVC glue manufacturers recommend that the cleaner not be allowed to dry before gluing the joint.) As always, the directions on the can provide the best advice on the process of [[solvent weld]].

	== Health and Safety ==		== Health and Safety ==

Jimmy101: Initial Version

2007-08-08T17:16:40Z

Initial Version

New page

PVC Glue is a mixture of PVC disolved in solvent and is used to [[weld|solvent welding]] two pieces of PVC together.

== How to use PVC glue ==

PVC glue is to be applied liberally to all PVC/CPVC joints, pipes or fittings (by use of a brush) where they are going to be connected together. In most cases, a brush is supplied with the glue. Application of glue should be done immediately after the application of PVC primer. (Most PVC glue manufacturers recommend that the cleaner not be allowed to dry before gluing the joint.) As always, the directions on the can provide the best advice on the process of [[solvent welding]].

== Health and Safety ==

PVC glue is a mixture of methyl ethyl ketone, cyclohexanone, tetrahydrofuran, and acetone. Tetrahydrofuran is a known carcinogen in animals, so PVC glue should be used in a well ventilated area. Gloves can be worn, but care should be taken to avoid spilling primer on them, as acetone penetrates through latex and rubber gloves, where it is absorbed through the skin. In addition, long term exposure of skin to these low-polarity solvents will severely dry your skin out, possibly leading to dermatitis. Swallowing PVC glue may result in death, and chronic inhalation of primer fumes can cause damage to several vital organs including the central nervous system, liver, and kidneys. Symptoms of acute (short term) overexposure include dizziness, headache, nausea, confusion, vomiting, and unconsciousness.

Be sure to read warnings and instructions. For more information the MSDS sheet for Oatey PVC Glue is available [http://www.e-barnett.com/MSDS/000325.pdf].

== Composition ==

Typical composition of PVC Glue;
{| style="margin: 1em auto 1em auto" border="0"
|-
!   Ingredient   !!   Percentage  
|-
| PVC Resin
| align="center" | 10 - 14%
|-
| Methyl Ethyl Ketone (MEK)
| align="center" | 40 - 55%
|-
| Tetrahydrofuran
| align="center" | 25 - 40%
|-
| Cyclohexanone
| align="center" | 5 - 10%
|-
| Acetone
| align="center" | 0 - 5%
|}

== External links ==

* [http://www.burntlatke.com/weld.html Solvent Welding Guide]
* [http://www.ipexinc.com/Content/EN_CA/3_0_Technical_Center/3_3_Training_Room/3_3_2_Online/3_3_2_1_Cement_Course/cement_course.asp Free IPEX Solvent Cementing Course]

[[category:Construction materials]]