Supah-Valve - Revision history

Benstern: added links

2008-06-01T15:59:15Z

added links

← Older revision		Revision as of 10:59, 1 June 2008
Line 1:		Line 1:
	The Supah-Valve is a chamber sealing [[piston valve]] designed and made by the [[The Spudgun Technology Center]]. It is one of the best performing spudgunning ~~valves~~ on the market, and on the short list of valves that are actually designed for use with gases, which combined with their excellent craftsmanship cause them to be very popular valves.		The Supah-Valve is a chamber sealing [[piston valve]] designed and made by the [[The Spudgun Technology Center]]. It is one of the best performing spudgunning [[valve]]s on the market, and on the short list of valves that are actually designed for use with gases, which combined with their excellent craftsmanship cause them to be very popular valves.

	The marketing at the spud gun technology center's product page lists the opening time as equivalent to that of a [[Diaphragm valve]], but this is disputed - chamber sealing valves typically have slightly longer opening times than barrel sealing ones due to the lack of a surface under the barrel to expose upon cracking open.		The marketing at the spud gun technology center's product page lists the [[opening time]] as equivalent to that of a [[Diaphragm valve]], but this is disputed - chamber sealing valves typically have slightly longer opening times than barrel sealing ones due to the lack of a surface under the [[barrel]] to expose upon cracking open.

	[[Image:sv1.jpg]]		[[Image:sv1.jpg]]

	'''Specifications:'''		'''Specifications:'''
	*Maximum Pressure - 120 psi		*Maximum [[Pressure]] - 120 psi
	*2" porting (inlet and outlet holes)		*2" porting (inlet and outlet holes)
	*Exterior body made from a 3" PVC tee		*Exterior body made from a 3" PVC tee
	*Nitrile O-ring sealed with nitrile face-gasket (1)		*Nitrile [[O-ring]] sealed with nitrile face-gasket (1)
	*static and dynamic bulkheads (1)		*static and dynamic bulkheads (1)

Benstern: spelling

2007-06-05T17:56:06Z

spelling

← Older revision		Revision as of 12:56, 5 June 2007
Line 1:		Line 1:
	The Supah-Valve is a chamber sealing [[piston valve]] designed and made by the [[The Spudgun Technology Center]]. It is one of the best performing spudgunning valves on the market, and on the short list of valves that are actually designed for use with ~~gasses~~, which combined with their excellent craftsmanship cause them to be very popular valves.		The Supah-Valve is a chamber sealing [[piston valve]] designed and made by the [[The Spudgun Technology Center]]. It is one of the best performing spudgunning valves on the market, and on the short list of valves that are actually designed for use with gases, which combined with their excellent craftsmanship cause them to be very popular valves.

	The marketing at the spud gun technology center's product page lists the opening time as equivalent to that of a [[Diaphragm valve]], but this is disputed - chamber sealing valves typically have slightly longer opening times than barrel sealing ones due to the lack of a surface under the barrel to expose upon cracking open.		The marketing at the spud gun technology center's product page lists the opening time as equivalent to that of a [[Diaphragm valve]], but this is disputed - chamber sealing valves typically have slightly longer opening times than barrel sealing ones due to the lack of a surface under the barrel to expose upon cracking open.

BillyBobJoe: /* sources */

2007-01-31T23:04:57Z

sources

← Older revision		Revision as of 18:04, 31 January 2007
Line 35:		Line 35:


	== ~~sources~~ ==		== Sources ==

	[http://web.archive.org/web/19960101000000-20030101235959/http://www.spudtech.com/supahvalveprod.html an old spudtech page]		[http://web.archive.org/web/19960101000000-20030101235959/http://www.spudtech.com/supahvalveprod.html an old spudtech page]

Boilingleadbath: formatting

2006-09-27T20:37:17Z

formatting

← Older revision		Revision as of 15:37, 27 September 2006
Line 35:		Line 35:


	sources: [http://web.archive.org/web/19960101000000-20030101235959/http://www.spudtech.com/supahvalveprod.html an old spudtech page]		== sources ==

			[http://web.archive.org/web/19960101000000-20030101235959/http://www.spudtech.com/supahvalveprod.html an old spudtech page]

	[http://www.spudfiles.com/forums/viewtopic.php?t=2534&postdays=0&postorder=asc&start=15& Spudfiles topic]		[http://www.spudfiles.com/forums/viewtopic.php?t=2534&postdays=0&postorder=asc&start=15& Spudfiles topic]

	[[category:valves]]		[[category:valves]]

Saladtossser: spelling

2006-07-18T01:54:30Z

spelling

← Older revision		Revision as of 20:54, 17 July 2006
Line 1:		Line 1:
	The Supah-Valve is a chamber sealing [[piston valve]] designed and made by the [[The Spudgun Technology Center]]. It is one of the best performing spudgunning valves on the market, and on the short list of valves that are ~~acctualy~~ designed for use with gasses, which combined with their ~~excelent craftmanship~~ cause them to be very popular valves.		The Supah-Valve is a chamber sealing [[piston valve]] designed and made by the [[The Spudgun Technology Center]]. It is one of the best performing spudgunning valves on the market, and on the short list of valves that are actually designed for use with gasses, which combined with their excellent craftsmanship cause them to be very popular valves.

	The marketing at the spud gun technology center's product page lists the opening time as ~~equivelent~~ to that of a [[Diaphragm valve]], but this is disputed - chamber sealing valves ~~typicaly~~ have slightly longer opening times than barrel sealing ones due to the lack of a surface under the barrel to expose ~~appon~~ cracking open.		The marketing at the spud gun technology center's product page lists the opening time as equivalent to that of a [[Diaphragm valve]], but this is disputed - chamber sealing valves typically have slightly longer opening times than barrel sealing ones due to the lack of a surface under the barrel to expose upon cracking open.

	[[Image:sv1.jpg]]		[[Image:sv1.jpg]]

Benstern at 03:23, 16 July 2006

2006-07-16T03:23:13Z

@@ Line 12: / Line 12: @@
 *static and dynamic bulkheads (1)
-sources: (1)[http://web.archive.org/web/19960101000000-20030101235959/http://www.spudtech.com/supahvalveprod.html an old spudtech page]
+[[Image:002.jpg]]
 [[category:valves]]

MisterSteve124 at 01:46, 14 April 2006

2006-04-14T01:46:59Z

← Older revision		Revision as of 20:46, 13 April 2006
Line 1:		Line 1:
	The Supah-Valve is a chamber sealing [[piston valve]] designed and made by the [[The Spudgun Technology Center]]. It is one of the best performing spudgunning ~~valve~~ on the market, and on the short list of valves that are acctualy designed for use with gasses, which combined with their excelent craftmanship cause them to be very popular valves.		The Supah-Valve is a chamber sealing [[piston valve]] designed and made by the [[The Spudgun Technology Center]]. It is one of the best performing spudgunning valves on the market, and on the short list of valves that are acctualy designed for use with gasses, which combined with their excelent craftmanship cause them to be very popular valves.

	The marketing at the spud gun technology center's product page lists the opening time as equivelent to that of a [[Diaphragm valve]], but this is disputed - chamber sealing valves typicaly have slightly longer opening times than barrel sealing ones due to the lack of a surface under the barrel to expose appon cracking open.		The marketing at the spud gun technology center's product page lists the opening time as equivelent to that of a [[Diaphragm valve]], but this is disputed - chamber sealing valves typicaly have slightly longer opening times than barrel sealing ones due to the lack of a surface under the barrel to expose appon cracking open.

Boilingleadbath: -typo

2006-02-01T23:32:52Z

-typo

← Older revision		Revision as of 18:32, 1 February 2006
Line 1:		Line 1:
	The Supah-Valve is a chamber sealing [[piston valve]] designed and made by the [[The Spudgun Technology Center]]. It is one of the best performing spudgunning valve on the market, and on the short list of valves that are acctualy designed for use with gasses, which combined with their excelent craftmanship cause them to be very popular valves.		The Supah-Valve is a chamber sealing [[piston valve]] designed and made by the [[The Spudgun Technology Center]]. It is one of the best performing spudgunning valve on the market, and on the short list of valves that are acctualy designed for use with gasses, which combined with their excelent craftmanship cause them to be very popular valves.

	The marketing at the spud gun technology center's product page lists the opening time as equivelent to that of a [[~~diaphram~~ valve]], but this is disputed - chamber sealing valves typicaly have slightly longer opening times than barrel sealing ones due to the lack of a surface under the barrel to expose appon cracking open.		The marketing at the spud gun technology center's product page lists the opening time as equivelent to that of a [[Diaphragm valve]], but this is disputed - chamber sealing valves typicaly have slightly longer opening times than barrel sealing ones due to the lack of a surface under the barrel to expose appon cracking open.

	[[Image:sv1.jpg]]		[[Image:sv1.jpg]]

Boilingleadbath: cleanup, noted possible market hype

2006-02-01T23:30:46Z

cleanup, noted possible market hype

← Older revision		Revision as of 18:30, 1 February 2006
Line 1:		Line 1:
	The Supah-Valve is a chamber sealing piston valve designed and made by the[[The Spudgun Technology Center]]. ~~To date it~~ is the best performing spudgunning valve on the market. ~~Their~~ opening time ~~is second only~~ to a [[~~burst disk~~]] ~~They are designed~~ to ~~work with compressed gases and are handmade. They have~~ a ~~excellent reputation and~~ the ~~quality is like nothing else. They are made from 3" PVC tees~~.		The Supah-Valve is a chamber sealing [[piston valve]] designed and made by the [[The Spudgun Technology Center]]. It is one of the best performing spudgunning valve on the market, and on the short list of valves that are acctualy designed for use with gasses, which combined with their excelent craftmanship cause them to be very popular valves.

			The marketing at the spud gun technology center's product page lists the opening time as equivelent to that of a [[diaphram valve]], but this is disputed - chamber sealing valves typicaly have slightly longer opening times than barrel sealing ones due to the lack of a surface under the barrel to expose appon cracking open.

	[[Image:sv1.jpg]]		[[Image:sv1.jpg]]
Line 6:		Line 8:
	*Maximum Pressure - 120 psi		*Maximum Pressure - 120 psi
	*2" porting (inlet and outlet holes)		*2" porting (inlet and outlet holes)
			*Exterior body made from a 3" PVC tee
	*Nitrile O-ring sealed with nitrile face-gasket (1)		*Nitrile O-ring sealed with nitrile face-gasket (1)
	*static and dynamic bulkheads (1)		*static and dynamic bulkheads (1)

71.136.47.52 at 18:12, 1 February 2006

2006-02-01T18:12:44Z

← Older revision		Revision as of 13:12, 1 February 2006
Line 1:		Line 1:
	The Supah-Valve is a chamber sealing piston valve designed and made by the[[The Spudgun Technology Center]]. To date it is the best performing spudgunning valve on the market. Their opening time is second only to a [[burst-disk]] They are designed to work with compressed gases and are handmade. They have a excellent reputation and the quality is like nothing else. They are made from 3" PVC tees.		The Supah-Valve is a chamber sealing piston valve designed and made by the[[The Spudgun Technology Center]]. To date it is the best performing spudgunning valve on the market. Their opening time is second only to a [[burst disk]] They are designed to work with compressed gases and are handmade. They have a excellent reputation and the quality is like nothing else. They are made from 3" PVC tees.

	[[Image:sv1.jpg]]		[[Image:sv1.jpg]]