Lathes?

Potatoes last one shot, so build reusable! Discuss ammo designs and ideas. Tough to find cannon part or questions? Ask here!
User avatar
8tonsemi
Specialist 3
Specialist 3
Posts: 321
Joined: Thu Feb 16, 2012 6:08 pm
Location: The moon

Tue Dec 18, 2012 1:32 pm

Can anyone lead me in the right direction of buying a mini metal lathe or wood lathe.
User avatar
CS
Moderator
Moderator
Posts: 1837
Joined: Fri Feb 18, 2005 5:32 pm
Location: Southern Utah

Donating Members

Tue Dec 18, 2012 4:16 pm

http://www.harborfreight.com/catalogsea ... t?q=lathes

Noice, the lathe I bought for 500 is now listed for 1,000.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Tue Dec 18, 2012 4:48 pm

8tonsemi wrote:a mini metal lathe or wood lathe
Both are different things, what do you want to achieve and what's your budget?
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jrrdw
Moderator
Moderator
United States of America
Posts: 6569
Joined: Wed Nov 16, 2005 5:11 pm
Location: Maryland
Has thanked: 39 times
Been thanked: 22 times
Contact:

Donating Members

Tue Dec 18, 2012 5:19 pm

Lathes do not come with tooling. Tooling being but not limited to: cutting bits/chisels, live center, steady rest, drill chuck, boring bar etc... Do your research.
User avatar
8tonsemi
Specialist 3
Specialist 3
Posts: 321
Joined: Thu Feb 16, 2012 6:08 pm
Location: The moon

Tue Dec 18, 2012 6:18 pm

jrrdw wrote:Lathes do not come with tooling. Tooling being but not limited to: cutting bits/chisels, live center, steady rest, drill chuck, boring bar etc... Do your research.
Sorry I should of been more specific I have done research I just wanted to know what a good lathe was.
User avatar
Zeus
Staff Sergeant
Staff Sergeant
Posts: 1505
Joined: Tue Oct 27, 2009 7:34 pm
Location: 'Straya, C*nt

Tue Dec 18, 2012 6:27 pm

This is a good lathe, anything less than it is a compromise on some level, it just depends if you can live with that compromise.
/sarcasm, /hyperbole
User avatar
8tonsemi
Specialist 3
Specialist 3
Posts: 321
Joined: Thu Feb 16, 2012 6:08 pm
Location: The moon

Tue Dec 18, 2012 6:39 pm

A little out of my budget lol. I was in the 150-1000 dollar range
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Tue Dec 18, 2012 7:18 pm

http://www.harborfreight.com/7-inch-x-1 ... 93799.html

This would probably be the best compromise.

I'm very happy with mine: http://www.sherline.com/4400pg.htm

The limitations for larger parts are obvious though.
hectmarr wrote:You have to make many weapons, because this field is long and short life
shardbearer
Private 4
Private 4
Posts: 85
Joined: Sat Apr 23, 2011 10:21 pm

Tue Dec 18, 2012 9:02 pm

Though I do not own it, I have heard only good things about the Sieg SC2 7x12. In case you didn't know, Sieg makes the majority of mini lathes in the US, rebranded by many distributors, including LittleMachineShop and Harbor Freight. Especially awesome in the SC2 (but not the C2 from HF!) is the brushless motor, which lets you make faster cuts and you don't need to change between gear ratios any more. Also, it comes with a cam lock tailstock so you can change tools quickly and tons of new safety features.

Check out this review, and read some of the others on that site.

If you can spare the dough, the Micro-Mark 7x16 is an upgraded version of the SC2 so you can turn larger pieces.

Can you tell what I want to buy once I get the money? :)
User avatar
grumpyoldman
Specialist
Specialist
Posts: 106
Joined: Tue Jan 31, 2012 8:04 pm
Location: Texas

Wed Dec 19, 2012 3:56 am

I bought a 8X14 lathe from Bob at LatheMaster.com a couple of months back and was very satisfied. It looks like he is out of stock right now but Harbor Freight sells the same one (different color). Harbor Freight lists it as 8X12 but it is really 8X14. Link: http://www.harborfreight.com/8-inch-x-1 ... 44859.html

The 8X12/14 lathes are about 150 pounds (or more) heavier than the 7X12 lathes and are a lot more beefy and sturdy.
User avatar
8tonsemi
Specialist 3
Specialist 3
Posts: 321
Joined: Thu Feb 16, 2012 6:08 pm
Location: The moon

Wed Dec 19, 2012 7:54 am

Thanks for the help. Everyone :)
Shardbearer-That looks like a great lathe :lol:
User avatar
jrrdw
Moderator
Moderator
United States of America
Posts: 6569
Joined: Wed Nov 16, 2005 5:11 pm
Location: Maryland
Has thanked: 39 times
Been thanked: 22 times
Contact:

Donating Members

Wed Dec 19, 2012 9:53 am

All though it shouldn't surprise me I'm shocked at the price increase of the lathes sold by Harbor Freight. I got mine (8X12) when it was $650ish on sale for $545.00. Now they want $999.00! It's still the same Central Machinery made lathe.

That being said, mine has paid it's self off and now makes me money and is fun to use every time I use it. If you have the budget to tool it up it's worth every penny! :D
Goats spudz
Specialist 4
Specialist 4
Posts: 458
Joined: Tue Aug 02, 2011 12:31 pm
Contact:

Wed Dec 19, 2012 11:49 am

Look on ebay and find an old lathe like a Southbend, there generally more rigid than those harbor freight Pieces of crap, they can also be pretty cheap.

Example

Example 2
Where's my Chuck key?
User avatar
mobile chernobyl
Corporal 3
Corporal 3
United States of America
Posts: 755
Joined: Sun Dec 03, 2006 11:53 am
Been thanked: 7 times

Wed Dec 19, 2012 1:27 pm

Oh gosh no - don't buy the first example.

I've used 2 of them. One I had to do extensive welding work to make a frame and add a new motor to as well.

They don't have any position indication worth using. I don't think they have any to be honest lol - it may have had a cross slide dial but it didn't work well at all (tried to calibrate with a magnetic base dial gauge)

Just save your money and buy a nice used South Bend, 9"+ atlas, Logan etc. something that was made nicely. If you have the money and don't feel like searching for used stuff - plenty of nice work has come from properly maintained Harbor Freight lathes as well - but it's always better to buy bigger than you currently need, because it always seems like you need a bigger lathe down the road!
User avatar
8tonsemi
Specialist 3
Specialist 3
Posts: 321
Joined: Thu Feb 16, 2012 6:08 pm
Location: The moon

Wed Dec 19, 2012 1:38 pm

I'll look into the lathes you posted thanks
Post Reply