.177 Rifled Barrels

Potatoes last one shot, so build reusable! Discuss ammo designs and ideas. Tough to find cannon part or questions? Ask here!
Binary Blue
Private 3
Private 3
Posts: 40
Joined: Thu Sep 01, 2011 6:37 pm

Fri Mar 29, 2013 9:19 pm

Do any of you guys (in the US) have experience ordering parts from Crosman?

I heard that you can order replacement parts from them through the phone, and it does not seem to be too expensive: a forum post on an airgun site said that a 24-inch barrel was only $12 (don't know if that includes shipping) and the crosman custom airguns section lists the price of a 24 inch barrel as around $8.

Image

I know I can use a 4.5mm ID pipe to make a smoothbore barrel, but if a rifled barrel is available for that little, I'd much rather get that.

I would like to get a 24 inch barrel in .177 and .22 caliber if available. What are some airguns that have such barrels so I can try to order the barrels as "replacement parts".
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2503
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 17 times

Donating Members

Wed Aug 21, 2013 12:08 am

If you're located in the US, then you can indeed order directly from Crosman.

2260 has a 24" .22 cal barrel Prt # 2260-003

1760 has a 24" .177 cal barrel Prt # 1760-001

Parts manuals can be found here...


http://www.crosman.com/cs/manuals
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 321 times

Donating Members

Wed Aug 21, 2013 12:32 am

At those prices, buy a whole stock and sell them to every forum n00b who asks about barrels :D
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
dart guy
Specialist 3
Specialist 3
Posts: 394
Joined: Mon May 13, 2013 7:54 pm
Location: not telling you

Wed Aug 21, 2013 9:27 am

now i know jsr, it wont work :twisted: ........... :? wait am i stil a n00b? :(
User avatar
ramses
Staff Sergeant 2
Staff Sergeant 2
United States of America
Posts: 1679
Joined: Thu May 29, 2008 6:50 pm

Wed Aug 21, 2013 9:31 am

Potential issue: is your gun running enough pressure to successfully deform your projectile to fit the rifling? (I doubt the average n00b's does, depending)
POLAND_SPUD wrote:even if there was no link I'd know it's a bot because of female name :D
User avatar
dart guy
Specialist 3
Specialist 3
Posts: 394
Joined: Mon May 13, 2013 7:54 pm
Location: not telling you

Wed Aug 21, 2013 9:35 am

im still wondering if im a n00b
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 7 times

Wed Aug 21, 2013 4:07 pm

Ramses has a good point and this is also why I decided against using one on my hammer valve. I believe spring-powered pellet guns generate over 1,000 psi in the chamber for a brief period of time. So I'd imagine that to get a respectable velocity with that barrel and its respective projectile you would need a good 500 psi or somewhere around there.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 321 times

Donating Members

Wed Aug 21, 2013 10:56 pm

dart guy wrote:im still wondering if im a n00b
Until we see a steady series of gradually improving launchers from you, yes.
Ramses has a good point and this is also why I decided against using one on my hammer valve. I believe spring-powered pellet guns generate over 1,000 psi in the chamber for a brief period of time. So I'd imagine that to get a respectable velocity with that barrel and its respective projectile you would need a good 500 psi or somewhere around there.
Disagree. The rifling on these barrels is extremely shallow, and pellets are made of relatively soft lead. Once the projectile "bites" into the rifling, you need a lot less effort to move it along.

If you can push a pellet into the barrel with your finger, then a 150 psi QEV launcher can do it too. Somebody prove me wrong :)
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 7 times

Thu Aug 22, 2013 6:50 am

These barrels are so cheap I wanna buy one and make a <s>hunting</s> target shooting rifle.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
User avatar
wyz2285
First Sergeant 2
First Sergeant 2
Austria
Posts: 2385
Joined: Sat Mar 06, 2010 7:50 am
Location: Porto, Portugal
Has thanked: 1 time
Been thanked: 3 times
Contact:

Thu Aug 22, 2013 7:09 am

Can somebody buy me some of these barrels then ship to me? I'll pay for the barrel and shipping of course also some "tip" :wink: because they only sell to US and Canada, even they do sell to Europe I'll have to pay A LOT fee/taxes (they always mark it as merchandise instead of gift or personal mail...)
CpTn_lAw wrote: :D "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? " :D
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 321 times

Donating Members

Thu Aug 22, 2013 7:11 am

Wyz, have you tried chambers?

https://www.gunspares.co.uk/products/24347/2260/

BRL088, about 40 euros.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
wyz2285
First Sergeant 2
First Sergeant 2
Austria
Posts: 2385
Joined: Sat Mar 06, 2010 7:50 am
Location: Porto, Portugal
Has thanked: 1 time
Been thanked: 3 times
Contact:

Thu Aug 22, 2013 7:14 am

I tried to buy a L.W barrel from them, a lot stuff were out of stock so I ended up buying a Weirhauch barrel. Also I'm looking for 4.5mm barrels
CpTn_lAw wrote: :D "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? " :D
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 7 times

Thu Aug 22, 2013 9:10 am

@binary blue- can I have the link to that page please? Can't find it.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2503
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 17 times

Donating Members

Thu Aug 22, 2013 1:31 pm

Gun Freak wrote:@binary blue- can I have the link to that page please? Can't find it.
http://www.crosman.com/custom-shop

This pricing is essentially the difference between the stock barrel and the others...retail pricing on just a barrel will be different.
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 7 times

Thu Aug 22, 2013 3:22 pm

Ah ok that makes much more sense. Knew it was too goo to be true! Haha
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
Post Reply