Teflon lined barrel

Potatoes last one shot, so build reusable! Discuss ammo designs and ideas. Tough to find cannon part or questions? Ask here!
Doodmens
Private 3
Private 3
Posts: 53
Joined: Tue May 19, 2015 7:44 am

Wed Sep 28, 2016 8:51 am

Hello,

I noticed that teflon and steel have a very low friction constant (0.05), and I was wondering if you could line a barrel with teflon (or make a barrel entirely out of teflon) and reach higher velocities than with a steel barrel (friction steel vs steel is 3x higher than steel vs teflon). Has anyone ever tried this? Or would the effect not be noticable?
User avatar
matti
Specialist 2
Specialist 2
Finland
Posts: 252
Joined: Tue Oct 04, 2005 1:01 pm
Has thanked: 1 time

Thu Sep 29, 2016 1:24 am

Unfilled teflon (ptfe) wears quite fast and is pretty soft, making it not suitable for barrel.. better way would be teflon sabot or sleeve on the projectile.

I don't think barrel friction makes lot difference unless it's very high friction or if the barrel and projectile is galling or projectile jamming.
Post Reply