barrel thoughts

Potatoes last one shot, so build reusable! Discuss ammo designs and ideas. Tough to find cannon part or questions? Ask here!
User avatar
Anatine Duo
Specialist
Specialist
Canada
Posts: 155
Joined: Sat Feb 01, 2014 11:16 am
Location: cottage country
Has thanked: 28 times
Been thanked: 7 times

Wed Aug 18, 2021 6:45 am

I've been thinking (uh oh) again about barrels.

First, rifled chokes. I have a scrap .22 cal that maybe could be used as a rifled choke on the end of a smoothbore barrel. There is a hypothesis that a high speed slug slamming into the rifling might be bad for accuracy, but at pneumatic velocities probably a non issue.

Then the thought occurred to me: hop up starts at the breech. This prevents random spins down the barrel. So, if I put my rifled section at the breech then the remaining smoothbore barrel functions for velocity and perhaps even smooths off the engraving on the projectile.

Has anyone tried such a thing? I live where rifled barrels can be expensive, especially long ones of large cal, so any way to save would be awesome.

Another thought: conical, or squeeze bores. I found some tapered stainless tube... start the projectile with extra force, squeeze it down for better sectional density. JSR links in 3,2,1...

I was thinking a stryrofoam pusher... what are the advantages over a discarding sabot anyway?
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 25965
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 333 times
Been thanked: 193 times

Donating Members

Thu Aug 19, 2021 9:43 am

Anatine Duo wrote:
Wed Aug 18, 2021 6:45 am
JSR links in 3,2,1...
How dare you assume exactly what I was going to do ;)

There are precedents for both ideas.

Apart from rifled shotgun chokes, having a small rifled sectioned at the muzzle is also the principle behind the FX smooth twist barrel that by all accounts works very well:



As to rifling at the breech, these WWI air mortars had less than a projectile length of rifling that studs on the projectile fitted into and it seems to have worked well.

Also, look at the Paris Gun:

Image

The last 6 meters of barrel are a smoothbore extension, unlike what is claimed in the wiki article from what I remember in Gerald Bull's book, this was to boost velocity without the complexity of having the barreled sections line up.

Of course you might have some air loss at the transition point depending on how it's done but the next benefit should be positive.
I live where rifled barrels can be expensive
You and me both, I have several firearm barrels that I intend to use for pneumatic projects and I'm similarly keen to cut costs.
conical, or squeeze bores
The "Gerlich Principle" as used by the 2.8 cm sPzB 41 and its bigger caliber offshoots works really well for powder burners but it's not really worth the trouble for pneumatics. The whole point is to sustain pressure in the barrel as the projectile travels down it, you can get the same effect in a pneumatic by just using a larger chamber or longer valve dwell.

Also worth mentioning to strengthen the case for a rifled breech section with mostly smoothbore barrel, the squeezebore Pak 41 as well as the guns that used the Littlejohn Adapter both used smoothbore tapered sections.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Anatine Duo
Specialist
Specialist
Canada
Posts: 155
Joined: Sat Feb 01, 2014 11:16 am
Location: cottage country
Has thanked: 28 times
Been thanked: 7 times

Sun Aug 22, 2021 8:02 pm

So interesting! I was also considering modifying a current coax muzzleloader to have a longer barrel... if successful there is huge potential for adding rifling or choke or simply barrel length.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 25965
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 333 times
Been thanked: 193 times

Donating Members

Tue Aug 24, 2021 6:06 am

One thing to keep in mind is that the rate of spin is going to depend on projectile velocity, so while a rifled breech might be attractive because it's more gentle on the projectile, a rifled muzzle is going to interact with it when it's at its fastest.
hectmarr wrote:You have to make many weapons, because this field is long and short life
iknowmy3tables
Staff Sergeant
Staff Sergeant
United States of America
Posts: 1576
Joined: Fri Dec 15, 2006 3:57 pm
Location: maryland
Has thanked: 2 times
Been thanked: 2 times

Thu Sep 09, 2021 3:17 pm

Question on barrel rifling expense, is a rifling button with budget? For .22 there are plenty of carbide rifling buttons for sale on ebay around $50. I haven't used one myself but from what I've seen if you rifle quality steel with a cheap rifling button you'll want drill rod and a press to force it through.
You might have an easier time with a trying that rifled breech only idea or the a softer metal since it's only for a pneumatic
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2498
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 10 times

Donating Members

Sun Sep 12, 2021 11:37 pm

Ever considered ECM rifling? I believe the FGC-9 and it's ecm'd barrel have been shared here before;



Smith and Wesson has been using ECM to rifle barrels for a while now....a quick look at the commercial version of the process;



Looks a bit over the top for the home gamer...perhaps even a little intimidating....if one had never seen the FGC-9 barrel being made.

Longer (rifle length) mandrels as used with the fgc are not really practical, but what about using a 3d printed "button" similar to what's used in the commercial process...along with a couple stepper motors and an arduino? Any bore size or twist rate becomes instantly possible... Not an ecm setup, but the idea for the mechanical side of things is here...



Working on the mechanism as time permits. Rifling buttons will mount on a rod and copper foil "tape" fits into grooves in the button in place of the copper wire used with the fgc mandrels

ECM Head...mount for the stepper that turns the button and guides along a section of aluminum box extrusion with a slot cut into it...simple enough.
Image


Parametric button model
Image

FYI...4130 seamless tubing can be readily had in Canada from Aircraft Spruce. McKinnon Metals is another place worth checking out...for this and other materials for the budding machinist.

Regards,
:)
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 25965
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 333 times
Been thanked: 193 times

Donating Members

Thu Sep 16, 2021 2:51 am

iknowmy3tables wrote:
Thu Sep 09, 2021 3:17 pm
there are plenty of carbide rifling buttons for sale on ebay around $50.
I've seen these but I was a little hesitant to purchase one, lest it's something flagged by the powers that be in the same way those wink wink nudge nudge "fuel filters" tend to be.
hectmarr wrote:You have to make many weapons, because this field is long and short life
Post Reply