Finding copper pipe parts

Potatoes last one shot, so build reusable! Discuss ammo designs and ideas. Tough to find cannon part or questions? Ask here!
kunkmiester
Private
Private
Posts: 12
Joined: Wed Dec 25, 2019 4:20 pm
Been thanked: 3 times

Wed Sep 15, 2021 1:02 pm

I was looking at copper for a couple of designs floating around in my head, but when looking at a decent sized gun(would want 1-2" barrel, and reducer to go from that to a 2-3" chamber/valve), the price of copper parts made me go :o Before I go looking at making my own parts oit of aluminum and brazing them on, I thought I'd see if there's anywhere worth looking. Furgeson and such have limited selection, the big stuff is hard to find.

It's copper, so it wouldn't suprise me if I'm barking up an empty tree, but I figured I'd ask before plunging into other options.
User avatar
mark.f
Sergeant Major 4
Sergeant Major 4
Eritrea
Posts: 3627
Joined: Sat May 06, 2006 11:18 am
Location: The Big Steezy
Has thanked: 52 times
Been thanked: 53 times
Contact:

Donating Members

Thu Sep 16, 2021 6:54 am

Yep, copper is pretty expensive. Places like McMaster rarely have the best prices but it'll take some legwork to find anything larger than 1" locally.

What type of cannon is it?
kunkmiester
Private
Private
Posts: 12
Joined: Wed Dec 25, 2019 4:20 pm
Been thanked: 3 times

Thu Sep 16, 2021 11:10 am

A combustion and a pneumatic. I actually sketched out the piston valve so the pilot is off to the side, ideally this would make it made out of smaller plumbing parts so fewer big pieces would be needed.


I feel more comfortable with metal than with plastic, but steel pipe has the seam, and so doesn't make a good barrel or valve housing. It sounds like estimating how much it would "cost" to make the aluminum parts would be worthwhile.
kunkmiester
Private
Private
Posts: 12
Joined: Wed Dec 25, 2019 4:20 pm
Been thanked: 3 times

Wed Sep 22, 2021 10:49 am

Epiphany for combustion designs at least, solder to npt adaptors aren't too much, so I can use a smooth copper barrel, and cheaper(and incidently stronger) steel for the chamber.

For pneumatics it's still square one. I'd like a design I don't have to machine on. That means finding a decent part to use for the main valve body that's smooth enough for a piston that can be connected to the barrel without a 75-100 dollar part.
User avatar
Anatine Duo
Specialist
Specialist
Canada
Posts: 186
Joined: Sat Feb 01, 2014 11:16 am
Location: cottage country
Has thanked: 36 times
Been thanked: 20 times

Thu Sep 23, 2021 5:24 am

IIRC some builders are sanding out the seam... I can't remember if I have done that but was going to when I get some time off, using a dowel and sandpaper. Slitting the business end of the dowel would allow shims to be inserted, sort of like old school rifling tools. Smaller pipe would also work instead of dowel but shimming gets creative
Post Reply