ProSniper's Copper "Sniper"

[prosniper]

HI GUYS ME AGAIN GETTING RIGHT INTO THIS SPUDGUN MAKING STUFF I HAVE MADE ANOTHER ONE FROM COPPER :-

STUFF YOU WILL NEED:-
1X 1 meter 15mm copper pipe
1X 1 meter 22 mm copper pipe
1x car valve
2X 22 mm end caps
2x 22mm to 15 mm reducers
3x 90 degree elbows
1x 15 mm bar pressure guage
1x fitting for above
1x ball valve







.
very easy to make mine had no leaks at all so im very happy , the foot pump i use very quicky put in the pressure i need within a few pumps. the max pressure i run it at it 5 bar and it will put a 15 mm spud bit over 100 feet with sum speed and a 15mm metal bolt into a car door at 20 feet away !!!! at the mo im building another one that has a twin bottle AND 28mm pipe so look out for it on the forum at spudfiles o and by the way no posts on how small the barrel is in some on the pics !!!! i know it was just finished that night and i had to go to the plumbers in the morning to get some more stuff as you will see the finished gun has a proper barrel.
****************** UPGRADE ******************

NEW SHOT
More Posted Soon !!!




Twin Modded Sodastream Bottles
than will run at 800psi each have not tested it yet and i dont think the copper pipe will hold but i have run it at more and more pressure at the mo im running at 14 bar with no problems
o and by the way have you seen my other cannon

http://www.spudfiles.com/forums/viewtop ... html#99031

[iPaintball]

Sweet copper gun! You should use a qev or piston valve to increase performance though. And no offence but that pic of you mkes you look like a tranny...

[hi]

damn, they sell copper by the yard, not meters here. guess i cant make one.

anyway, nice gun. looks like a fun one, but would be way more fun with a QEV (quick exhaust valve).

what ever you do with it, it is very cool.

[spud yeti]

Nice gun! Id like to see the pic of the car door though! (Whose car was it??)
Good work though!

[Pyro Ninja]

nice gun.....is the ballvalve lever always on an angle..(not parallel or vertical)....

[prosniper]

no the ball valve is allways in the 9 -3 and to fire to gos to the 12 - 6 . i took the pic like that coz i wanted it to be seen

[prosniper]

Sweet copper gun! You should use a qev or piston valve to increase performance though. And no offence but that pic of you mkes you look like a tranny...

NOT SURE YOUR WHAT YOU MEAN BUT I THINK WHAT YOU WANTED TO SAY WAS THAT YOU LOVE TRANNYS AND NO IM NOT YOUR TYPE BUT I KNOW A MAN/WOMAN THAT IS.........YOUR MOM OR IS IT YOUR DAD

[iPaintball]

What I meant was, you were wearing a kind of tight shirt, and you looked like you were wearing lipstick. A lot of cameras make it look like you are wearing lipstick and I have no idea why. I must admit that it is a little immature to be insulting one's mom/dad. Your are a grown man are you not? And for god's sake, don't type in all caps.

[prosniper]

"one's"" lol sorry did not realise you were royalty lol

[prosniper]

Nice gun! Id like to see the pic of the car door though! (Whose car was it??)
Good work though!

i will post as soon as i can i looks good and it was the old fucker next door bad luck a lol

[spud yeti]

Nice! I just saw the twin soda streams now! I also had 2 but my dad threw them away! :violent1: (Im the one with the hammer, guess who the other is!?) Oh well, I'll try get some more though. LOL, has he seen the hole yet?

[prosniper]

Nice! I just saw the twin soda streams now! I also had 2 but my dad threw them away! :violent1: (Im the one with the hammer, guess who the other is!?) Oh well, I'll try get some more though. LOL, has he seen the hole yet?

i get mine from the local shop they will run at 800 psi thats about 60 bar lol so i have the possible pressure of 120 bar but you will have to find a pipe that will hold it i run it at 12 bar at the mo with no problems at all

[joannaardway]

i get mine from the local shop they will run at 800 psi thats about 60 bar lol so i have the possible pressure of 120 bar

Just to let you know, it doesn't work like that.
Two 60 bar rated chambers does not create a 120 bar rated cannon.
It creates a 60 bar rated chamber pair.

The "rating" of the cannon is not the sum of all the ratings added together - it's the rating of the lowest rated part, minus a bit.

[prosniper]

i get mine from the local shop they will run at 800 psi thats about 60 bar lol so i have the possible pressure of 120 bar

Just to let you know, it doesn't work like that.
Two 60 bar rated chambers does not create a 120 bar rated cannon.
It creates a 60 bar rated chamber pair.

The "rating" of the cannon is not the sum of all the ratings added together - it's the rating of the lowest rated part, minus a bit.

well fu** ME i did not know that THANKS FOR THAT to save me the embarrassment lol

[frankrede]

No thank him for your life.