88g regulator

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
Post Reply
choke
Private
Private
Posts: 5
Joined: Fri May 24, 2013 4:58 pm

Fri May 24, 2013 6:36 pm

Hey all. Does anyone know if there's a way to regulate the output of an 88g disposable co2 capsule?
Top
PVC Arsenal 17
Staff Sergeant 3
Staff Sergeant 3
Posts: 1762
Joined: Mon Mar 27, 2006 4:18 pm
Location: United States

Fri May 24, 2013 6:52 pm

This will allow the 88g cartridge to connect to paintball threaded (ASA) equipment. From there you can plug it into a regulator, such as the Palmer Female Stabilizer which I highly recommend.
Top
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2504
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 17 times

Donating Members

Fri May 24, 2013 7:57 pm

X2 for the Palmers reg...good piece of hardware.

I will add that the 88gram cartridges are THE most costly form of CO2 available. If you intend to regulate, then you'll most likely end up with an asa thread somewhere...far better off IMO to take the jump to a refillable CO2 tank as well. Will save you some coin in the long run.

Your choice though. :)
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
Top
choke
Private
Private
Posts: 5
Joined: Fri May 24, 2013 4:58 pm

Sat May 25, 2013 4:24 am

Thanks for the info guys. I'll see if I can get the project up and running with 88g's then maybe look at purchasing a co2 tank. If it works :-P. Thanks again
Top
Post Reply

Return to “Pneumatic Cannons”