Where to buy CO2 Regulators?

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
shadowghost21
Private 3
Private 3
Posts: 47
Joined: Tue Sep 19, 2006 7:48 pm

Mon Oct 16, 2006 8:22 pm

Where can I buy a CO2 regulator and anything else I am going to need to make a CO2 powered cannon (small). And most importatly how much do they cost??
User avatar
sergeantspud2
Specialist 3
Specialist 3
Posts: 315
Joined: Tue Jun 07, 2005 5:43 pm
Location: So Cal

Mon Oct 16, 2006 8:59 pm

If you want a CO2 regulator theres two options:

Paintball tanks- regulator cost from $50-$90
Bulk tanks- regulators cost about $70+

A paintball tank will be smaller and you can get them filled at any paintball shop. Or a bulk tank which will cost a little bit more but you'll get a lot more air.
:D Always rely on Murphy's Laws :D
4.If you have enough grease & a big enough hammer, you can put anything... anywhere
3.If all else fails, hit it with a big hammer
2.Matter will be damaged in direct proportion to its value
1.If anything simply cannot go wrong, it will anyway
User avatar
)DEMON(
Sergeant 4
Sergeant 4
Posts: 1391
Joined: Sun Mar 12, 2006 1:22 pm
Location: Johannesburg South Africa

Tue Oct 17, 2006 9:51 am

ARRGG!!! :evil: So many people have asked this question!

Here you go, they are called Palmers regulators
: http://www.palmer-pursuit.com/online-ca ... ilizer.htm
:roll:
Forever dreaming...
User avatar
sv490665
Private 4
Private 4
Posts: 73
Joined: Tue Sep 05, 2006 11:15 am

Fri Oct 20, 2006 9:11 pm

What about those regulators they use for air compressors? would those hold up to 800 psi?
Post Reply