my 1st pneumatic

[unisonmind]

so this is my 1st pneumatic cannon. my chamber is a old welding tank that can take 600 psi easy,a 600 psi ball valve and a 1.5 pvc barrel that i got from my old combustion cannon. ya i know its a simple one but it has some power. ive only tested it up to 150 psi. so leave your comments and tell me what you think


<a href="http://photobucket.com/" target="_blank"><img src="http://i87.photobucket.com/albums/k154/ ... ure057.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>



<a href="http://photobucket.com/" target="_blank"><img src="http://i87.photobucket.com/albums/k154/ ... ure055.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>




<a href="http://photobucket.com/" target="_blank"><img src="http://i87.photobucket.com/albums/k154/ ... ure054.jpg" border="0" alt="Photobucket - Video and Image Hosting"></a>[/img]

[killagorrila99]

Well well well! Very nice indeed. Ever thought of burst disks? They are alot easier to use than most other valves.

[unisonmind]

no whats a burst disks?

[MrCrowley]

Its a disk of material placed in a union,and when the chamber gets to a certain pressure it will blow open,only problem is you cant trigger them(unless you make a triggered one like gorts)You have to keep replacing the burst disk and putting it in the union and sometimes they tear istead of blow open.They can be a pain but can have alot of flow and are cheap(homemade) But if you want to take this up to 300psi+ you'll have to make a piston valve(dont ask just search)and replace your barrel with a sch80 one.

[Flying_Salt]

Great work, but you might want to change out the barrel and upgrade to a piston valve if you want to take it to high pressures.

EDIT: MrCrowley beat me...

[Hotwired]

I wouldn't bother messing with burst valves, not when you've got a pneumatic.

They're for hybrid cannons to hold back the pressurised fuel/air mix then burst when the mix is ignited because nothing else reliably opens at the right time (unless you spend some serious money).

[unisonmind]

ya so i just orded a new golf ball barrel and im lookin for a 300 psi dump valve cuz a piston valve is just much mod work for this gun but im going to make a piston for the next one

[medievalman]

+Nice Paintjob. But ball valves hae really slow opening times, and upgrading the valve would increase the performance ALOT!

[ballad of NJ]

next time try pvc if your a begginer easyer to work with but otherwise nice gun and design

[frankrede]

ballad of Nj, that is the biggest lie I have ever heard.
Metals can be easy to work with and have alot of things that Pvc doesn't offer.
Mostly safety and aesthetics.

[MrCrowley]

next time try pvc if your a begginer easyer to work with but otherwise nice gun and design

Well he's certainly no no0b. He may be new to the forum(like you) but that is a nice high quality 'smoothbore'. Why did you ask him to try PVC if he's a beginer? He's obviously experienced or he knows what he is doing and he is skilled at it. I don't considor that to be a beginer gun. Without the ball valve and a barrel sealer in its place that would be a really really nice gun. And if you have the money I wouldn't turn back to PVC if I was you.

[dippydodo03]

very nice gun. i'd like to make one like that. isn't it heavy?

[unisonmind]

ya its like 23lbs but i have a tank thats about 6in smaller for my next gun

[cb4289]

try making one in the shape oof a assult rifle it would look cool.

[gjohng]

what is the black "bottle" that is holding the compresses air?

whats it called?

co2 tank?

thankyou in advance for any help