How-To: Make a pneumatic cannon with a 2" piston valve.

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Mon Apr 14, 2008 2:05 pm

Hmm weird, mine completely thread together. :?
niglch
Specialist
Specialist
Posts: 116
Joined: Sat Jul 07, 2007 8:14 pm

Mon Apr 14, 2008 8:20 pm

MrCrowley wrote:Hmm weird, mine completely thread together. :?
I just bought some new parts to replace the ones I broke. The first is a 2" female adapter and the second is a 2" threaded plug. Both parts indicate that they are pressure rated & schedule-40 (NSF-PW). However, when I tighten them with my hands, the two parts only thread about halfway in before they lock up. Trying to force it in any more is what broke the last set of fittings I had. Is this ok or am I supposed to use some sort of lubricant when threading the parts together? I read online something about it being bad to over-torque PVC fittings so should I just leave it how it is?

Thanks.
Attachments
The fittings only thread together this far before locking up . . . :(
The fittings only thread together this far before locking up . . . :(
Here are the two fittings separately.
Here are the two fittings separately.
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Mon Apr 14, 2008 10:28 pm

Yeah don't over-torque them.

The fittings I used were a female and male threaded adapter. They completely threaded together with ease.
clide
Corporal 3
Corporal 3
Posts: 784
Joined: Sun Mar 06, 2005 3:06 am
Location: Oklahoma, USA

Donating Members

Tue Apr 15, 2008 5:07 pm

Fittings in the US shouldn't thread all the way together. The only ones I have seen that do have gaskets on them and aren't very common or are DWV parts.

PVC manufacturers typically recommend one to two turns past hand tight, and that seems to work for me usually.
<a href="http://gbcannon.com" target="_blank"><img src="http://gbcannon.com/pics/misc/pixel.png" border="0"></a>latest update - debut of the cardapult
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Tue Apr 15, 2008 10:43 pm

Yeah that's a good point Clide. I'm using metric fittings.
User avatar
DaGrimRaper
Private 2
Private 2
Posts: 32
Joined: Wed Apr 23, 2008 11:35 pm

Sat Apr 26, 2008 9:39 pm

wow thnks dude.
-And NO my Name isn't misspelled-
-Internet Rule #21: Everyone on the internet is a boy unless proven otherwise-
User avatar
tony48
Private 4
Private 4
Posts: 80
Joined: Sun Apr 06, 2008 6:46 pm

Sun May 04, 2008 3:11 pm

Where did you get your barrel? I'm looking for a golfball barrel and I think I might have to go to a plumbing store to get one.
User avatar
JDP12
Staff Sergeant 5
Staff Sergeant 5
Posts: 1943
Joined: Fri Mar 30, 2007 8:34 pm

Sun May 04, 2008 3:26 pm

http://www.bcarms.com

(message too short)
"Some say his pet elephant is pink, and that he has no understanding of "PG rated forum". All we know is, he's called JSR. "
THUNDERLORD
Sergeant 3
Sergeant 3
Posts: 1264
Joined: Fri Mar 28, 2008 1:42 pm

Fri May 23, 2008 1:07 am

Great How-To, Thanks MrCrowley.
Been thinking about piston design/ GB pistons and this will be very helpful.

Also with your system of having a seperate fill and exhaust pilot it looks like a way to add an auto-fill by leaving the fill attached.

I would like to design something similar with electric solenoids some time.
I read over the replies but didn't see any comments about that?
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Fri May 23, 2008 1:17 am

Yes, sometimes I leave my compressor attached if i'm shooting in the garage or driveway. I should've put a breechloader on it, maybe even a manual hopper*. Don't think anyone brought up anything like that, any questions just ask.

I'm in the process of building a new 2" piston golfballer for a school assignment, should be done in a week or two. I learnt a lot from this cannon, so i've made a few advancements in my new one. I could make it more powerful then it would be, but i'm limited by my assignment unfortunately. So I don't have 100% freedom.


*As in manual I mean that you need to do something to make the next golfball drop down, otherwise half of them will get sucked out in one shot.
drunkii
Private 2
Private 2
Posts: 25
Joined: Thu Jul 17, 2008 1:36 pm

Sat Jul 19, 2008 9:25 am

how much did that cost you ?:p
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Sat Jul 19, 2008 5:16 pm

~$350NZD


Something like that
jon_89
Corporal 2
Corporal 2
Posts: 607
Joined: Wed Apr 11, 2007 9:50 pm

Wed Nov 12, 2008 1:19 am

I figured I ask this here instead of starting a new topic. I have read several topics of people using 1.25in caps and couplers as pistons. How well do these fit in 2in pipe?
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Wed Nov 12, 2008 3:08 am

In NZ I tried using them, all the same brand, but they were a few mm off.

I hear different brands have different outside diameters, so i'd recommend taking a small piece of 2" pipe to Home Depot and trying some 1.25" couplers out.
User avatar
jmccalip
Specialist
Specialist
Posts: 118
Joined: Sun Apr 12, 2009 8:07 pm

Wed May 13, 2009 6:09 pm

niglch wrote:
MrCrowley wrote:Hmm weird, mine completely thread together. :?
I just bought some new parts to replace the ones I broke. The first is a 2" female adapter and the second is a 2" threaded plug. Both parts indicate that they are pressure rated & schedule-40 (NSF-PW). However, when I tighten them with my hands, the two parts only thread about halfway in before they lock up. Trying to force it in any more is what broke the last set of fittings I had. Is this ok or am I supposed to use some sort of lubricant when threading the parts together? I read online something about it being bad to over-torque PVC fittings so should I just leave it how it is?

Thanks.
Yeah, just thought I'd add that anytime you see "NPT" thread(nation pipe thread), it means it's tapered. Like this:

Image

I'm not sure exactly why they taper the threads. At first I thought it might be easier to insure a leak proof fitting in case of tolerance errors in the the manufacturing process. But I work in a machine shop, and NPT threads tolerances for our parts are +-.0005 on how far the gauge threads.

Pretty much any plumbing/air supply pipe or fitting you buy in America is NPT. I guess we have to do things different from you NZ and AUS folk. :lol:
Last edited by jmccalip on Wed May 13, 2009 6:13 pm, edited 5 times in total.
Post Reply