Modding a blowgun
Ok so check this out i decided to take my blowgun trigger and moddify it for easier mounting. it is a 90 degree forward facing exhaust and it has a hanger on top that is gonna get whacked off, an aluminum plate welded to the top and the trigger mounted lower. heres a paint picture and a picture of the original with the trigger already moved down you can still see the original mounting holes.
- Attachments
-
- bolwgun before the top gets wacked after the trigger has been moved
- Blowgun Orig.jpg (9.81 KiB) Viewed 1157 times
-
- paint drawing with step by step along side
-
- Blowgun after hanger has been chopped off
- Blowgun Mod 1.jpg (9.75 KiB) Viewed 1143 times
<a href="">DONT TAZE ME BRO.. DONT TAZE ME... AHHHH</a>Yea, that's definitely going to get you at least a tazer.
facebook.com/biggrib
Well if it makes it easier to mount onto your sprinkler valve then i think its great 
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
-
wangpushups
- Specialist
- Posts: 185
- Joined: Sun Sep 23, 2007 12:28 pm
- Location: Wisconsin
Did you weld it on there or jb weld it?
i'm going to have the aluminum plate tig welded to the top of the blowgun housing
<a href="">DONT TAZE ME BRO.. DONT TAZE ME... AHHHH</a>Yea, that's definitely going to get you at least a tazer.
facebook.com/biggrib