My New Pneumatic Cannon

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
User avatar
tony48
Private 4
Private 4
Posts: 80
Joined: Sun Apr 06, 2008 6:46 pm

Wed Apr 30, 2008 2:13 pm

I am going to be making a new pneumatic cannon soon. I have only made a few cannons before, all out of PVC. One was a simple combustion and the other was a pneumatic with a ball valve. Here are my problems.

1) For my next cannon I want to use a sprinkler valve. I understand how to modify them and everything but I was wondering if I could find one that is bigger and still easy modify. I am planning on interchangable barrels (screw on type) up to 1 1/2 inches and maybe bigger. I think that the small 1" and 3/4" valves would constrict airflow a little to much. I can't seem to find a bigger valve on the internet for a reasonable amount of money.

2) I want to make the cannon(chamber and barrel) out of metal so I can pressurize it more. How would I attatch the metal air chamber to the plastic sprinkler valve? Is there another valve option that I can use? I don't want to make a piston valve or use a ball valve.

3) I would like to know how to make a good breech loading mechanism. With my old cannon (8 foot barrel) I got tired of muzzel loading it.

Thank you to all who help. :D
User avatar
jrrdw
Moderator
Moderator
United States of America
Posts: 6569
Joined: Wed Nov 16, 2005 5:11 pm
Location: Maryland
Has thanked: 39 times
Been thanked: 22 times
Contact:

Donating Members

Wed Apr 30, 2008 4:36 pm

No Jimmy Johnson fans allowed, just joking. McMasters sells QEV's, if you got the money, your asking for a tall order -- big cheep valve. We all want that. Use threaded adapters to attach PVC to metal, pipe threads is pipe threads, use teflon tape to seal the threads.

Do some looking around for the info on breech load building, it's all in here.

Welcome to Spudfiles.
User avatar
STHORNE
Sergeant 3
Sergeant 3
Posts: 1208
Joined: Wed Feb 14, 2007 7:50 pm
Location: Kewaunee, Wisconsin

Donating Members

Wed Apr 30, 2008 4:54 pm

you could just make your own piston/coax.. I know its a different concept but its limitless to pipe sizes/air flow.

also, better performance (from what I've read/seen)..
Forum Rules - follow them or else!
“Happiness is the meaning and the purpose of life, the whole aim and end of human existence”
jimmy101
Sergeant Major
Sergeant Major
United States of America
Posts: 3197
Joined: Wed Mar 28, 2007 9:48 am
Location: Greenwood, Indiana
Has thanked: 5 times
Been thanked: 15 times
Contact:

Wed Apr 30, 2008 6:20 pm

tony48 wrote:... I want to make the cannon(chamber and barrel) out of metal so I can pressurize it more. How would I attatch the metal air chamber to the plastic sprinkler valve?
If you use a standard plastic sprinkler valve than there is zero advantage in using metal for the rest of the gun. The system is only as strong as the weakest part. Sprinkler valves are designed for ~60PSIG nominal and probably pressure rated up to perhaps ~120PSIG or so.

Standard pressure rated PVC can be pressurized to higher pressures than the plastic sprinkler valve.
Image
User avatar
watto
Specialist 3
Specialist 3
Posts: 327
Joined: Wed Dec 13, 2006 5:47 pm
Location: Australia

Wed Apr 30, 2008 7:58 pm

Looks like your doing the same as I did, first ghetto combustion guns then a ballvalve gun then a sprinkler then finally piston guns which is where I'm at now, might I suggest you skip the middle step and go straight to piston guns? coaxiles are just as easy as your average sprinkler cannon plus they are cheaper and way more powerful.

If you really want to use a sprinkler, why not use 2 one inch sprinklers actuated by the same blowgun? Cheaper than buying a 2 inch one.

If you want a metal chamber use a fire extinguisher, you can get copper fittings that screw from the fire extinguisher into the sprinkler, but theres no point having a metal chamber with a sprinkler valve, I wouldn't take my sprinkler valve past 140 or so.
User avatar
Tooo Easssyy
Private
Private
Posts: 15
Joined: Wed Apr 30, 2008 3:36 am

Thu May 01, 2008 3:11 am

(dont know about your first question sorry)

but with you could use a copper fitting from the metal chamber to the plastic sprinkler valve, it would be the easiest and cheapest way to do it i think.

and with your 8 foot barrel check out this website it might help, i did for me

Tooo Easssyy


http://www.advancedspuds.com/breech.htm
http://www.advancedspuds.com/interchangable.htm
User avatar
tony48
Private 4
Private 4
Posts: 80
Joined: Sun Apr 06, 2008 6:46 pm

Thu May 01, 2008 2:12 pm

I think I will just make a piston valve out of a deodorant can like the sticky of that sniper. That breech loading idea that someone linked me to looks good. I think I will make my breach loader like that. thanks to all for your information. I would not understand alot of this stuff if it weren't for this forum.
User avatar
watto
Specialist 3
Specialist 3
Posts: 327
Joined: Wed Dec 13, 2006 5:47 pm
Location: Australia

Thu May 01, 2008 10:23 pm

Yeh some deoderant cans fit well, but you have to fill them with glue or epoxy or something similar for strength, which makes them quite heavy. You could use a pvc coupling like I have, theyre very strong and easy to sand to the right size if you jam it on a drill. I just finished my new golfball piston cannon about 15 minutes ago, now comes the agonising 48hr wait for the cement to cure :shock: :?
Post Reply