heres a new coaxial i made over 3 days
specs
7 bar
29" long
3/4 T
1/2 pieces
1/4 pieces
1 cm barrel inner diameter
im thinking of changing piston because if you listen to the video the piston doesn't sound right.
im going to make a stock for it
i have a fridge compressor. but still goes up to 11 bar.
the video was at 7 bar and it got lodged into the door, if the screws didn't come fly out side ways it would penetrate better,. when i increased the pressure the power increased dramatically.
i haven't done many shots at 11 bar. when it is at 9 bar and up, the screws ricochet and fly right back at you. there was one shot where it ricocheted and made a mark in gip wood
i really need sights on this gun and the camera i used was bad
heres the pics
[youtube][/youtube]
(edit) can some one help me with the vid o.O its not working ( do you need the embed url
Posted: Sun Nov 29, 2009 4:26 am
by EvilFish
if the screws didn't come flew side ways it would penetrate better, the times they stuck in the door they normally.
I'm guessing, you're from holland, right?
but seriously, thats a nice compact gun. I need to start using copper. what did you make the piston out of? it looks like glue a little bit.
Posted: Sun Nov 29, 2009 4:29 am
by qwerty
Neat little shooter dude. take it to a higher pressure!
Oh, i know who you are. You're that digadogup guy, i commented on your vid saying that the piston opens to slow (my hot glue piston opens very slowly too.0
Posted: Sun Nov 29, 2009 4:32 am
by jackssmirkingrevenge
You don't deserve the help for not cropping out your feet in the photos, but I'm in a charitable mood
[youtube][/youtube]
Posted: Sun Nov 29, 2009 5:19 am
by airheadnoob
XD qwerty didnt know that was you.
im not from Holland why would you think that, my bad English?. i posted it on a french website 1st and did a lazzy thing and reused the translation XD
im an Aussie
oh yes it is very easy to conceal you can hide it under your t-shirt
Posted: Sun Nov 29, 2009 7:32 am
by psycix
EvilFish wrote:
if the screws didn't come flew side ways it would penetrate better, the times they stuck in the door they normally.
I'm guessing, you're from holland, right?
Since when is bad grammar related to Holland?
This coax looks like a good start. Your piston is very long (and thus heavy), see if you can shorten it.
Posted: Sun Nov 29, 2009 7:39 am
by Willdebeers
What is related to holland is legal weed and prostitutes.
Posted: Sun Nov 29, 2009 8:46 am
by Major Collins
may i ask... what fitting and how did you attach the blow gun to the tee?
Posted: Sun Nov 29, 2009 10:00 am
by qwerty
what fitting and how did you attach the blow gun to the tee?
It looks like 3/4 to 1/2 bushing then a 1/2 to 1/4 reducer.
Posted: Sun Nov 29, 2009 12:41 pm
by MountainousDew
Willdebeers wrote:What is related to holland is legal weed and prostitutes.
Two of the best things I can think of... haha.
Posted: Sun Nov 29, 2009 2:10 pm
by psycix
Willdebeers wrote:What is related to holland is legal weed and prostitutes.
Which in turn, result in bad grammar... you've got a point there.
Posted: Mon Nov 30, 2009 12:27 am
by airheadnoob
yes bad this grammar is. O.o
i did use a 3/4 to 1/2 and then 1/2 to 1/4.
i had a qev gun that didn't make a vapor cloud which had the same piston and had a bigger air chamber.
if i change the 3/4 t to a 1/4 t would that do much?
Posted: Mon Nov 30, 2009 2:45 am
by qwerty
if i change the 3/4 t to a 1/4 t would that do much?
No, it wont but it will reduce pilot volume.
Posted: Mon Nov 30, 2009 2:52 am
by jackssmirkingrevenge
psycix wrote:Which in turn, result in bad grammar... you've got a point there.
The weed I can understand, but prostitutes?
"Laura dearest, please go a little slower! Can't you see I'm trying to access a potato launching forum while you pleasure me and it's interfering with my grammar!"
take it to a higher pressure!
