Small Caliber

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
Spooky
Private
Private
Posts: 13
Joined: Tue Aug 11, 2009 4:36 pm

Sun Feb 14, 2010 4:11 pm

So, I've got my hands on an old .22 air rifle barrel and was looking at making my own rifle.

I know with compressed air it's hard to get high power with a small caliber and the reasons behind that. However, after a few simulations with GGDT I'm getting some pretty poor results power wise.

When I look at .177 air rifles easily achieving 12ft/lb, why does GGDT indicate I can only just surpass this with .22 and 400 PSI.

I know PCP rifles have a bottle compressed to very high pressures, but only a small amount of this released upon firing. What sort of pressures do simple springer rifles create to accelerate pellets so quickly?
User avatar
Mr.Sandman
Corporal 3
Corporal 3
Posts: 762
Joined: Fri Mar 28, 2008 9:10 am
Contact:

Donating Members

Sun Feb 14, 2010 10:41 pm

Well for one thing, 22 caliber pellets are heavier and go slower. It can also be user error, post a picture so that we may better help you. What valve setup are you using and did you convert the grains to grams correctly?
Yeah, it's that important.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Sun Feb 14, 2010 11:58 pm

Spooky wrote:What sort of pressures do simple springer rifles create to accelerate pellets so quickly?
The more powerful ones generate several thousand psi, and remember also that the sudden compression heats the air (as well as the detonation of lubricant in the chamber) so it's not the same kettle of fish as pneumatics.

Also note that for a given chamber size, in commercial pneumatics the 0.177 will get much less shots per fill that the 0.22 version, because you need more air to push the smaller calibre to higher muzzle energies. Simply put, bigger calibre -> more efficient. Even in spring or gas ram air rifles, if both 0.177 and 0.22 versions are sold at 12 ft/lbs, many times the spring in the 0.177 version will be more powerful.

In spite of the small difference in calibre, in terms of projectile base area the 0.177 only has 65% of the area of the 0.22 projectile, this means that for say 100 psi in the barrel the 0.177 will have less than 2.5lbs of force on it, as opposed to almost 4lbs for the 0.22

That being said, you can easily get 400 psi from a cheap shock pump and with a fast valve like say a 1/4" QEV you can achieve this sort of performance.
hectmarr wrote:You have to make many weapons, because this field is long and short life
Spooky
Private
Private
Posts: 13
Joined: Tue Aug 11, 2009 4:36 pm

Mon Feb 15, 2010 3:22 pm

This is GGDT's prediction, modeling a 1/2" QEV and the heaviest pellet I could find at 400 PSI.
Image
14J = slightly over 10ft/lbs.

GGDT gives the best muzzle energy with the heavy pellet. I know that enegry will dissipate very quickly and a lighter pellet would be much better practically, it's just an example.

Barrel length is fixed, it's the length of my rifled barrel. Increasing the chamber volume has very little effect and 400 PSI is my maximum obtainable pressure. I guess that's just the limit of pneumatics? :(
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Mon Feb 15, 2010 3:32 pm

I'm guessing your 40cm<sup>3</sup> dead volume has a lot to do with it :roll:

The 30cm<sup>3</sup> pilot volume also seems a little too high.
hectmarr wrote:You have to make many weapons, because this field is long and short life
Spooky
Private
Private
Posts: 13
Joined: Tue Aug 11, 2009 4:36 pm

Mon Feb 15, 2010 4:02 pm

That's the higher value suggested here when moddeling the QEV, and as I need a some space for breach loading I thought this was a realistic. Reducing the value to zero only increases the power to 20J.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Mon Feb 15, 2010 4:39 pm

40cm<sup>3</sup> is equivalent to around 170cm of 0.22" tubing - that's around 4 times the total length of your barrel - how much space do you need for breech loading?

I can't see the UKSGC thread but the pilot volume also seems excessivly large, it would certainly not be that big in a properly designed launcher like copperhead prime, and if you have the pilot valve directly tapped into the QEV it could be made even smaller.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jhalek90
Specialist 4
Specialist 4
Posts: 498
Joined: Fri Aug 14, 2009 5:37 pm

Mon Feb 15, 2010 6:26 pm

ahh JSR, you make me happy like only another man should make a man happy. Thank you for indirectly answering MY question.

But i do have a question for you.

In a nutshell, you said that a .177 cal pellet takes MORE air pressure to come up to the same speed as a .22 cal?

Dose not the weight of the projectile come into play?

Lest use some random numbers for a second...

If we have 3 cubic inches of air, at a pressure of 400 psi, assuming perfect 100% flow, simply a barrel, that the pressurized air magically appeared in, exactly 3 cubic inches behind the projectile, with the same length of barrel in front of the projectiles, lets say 3 feet. would not the .177 cal bullet leave the muzzle faster than a .22 cal??

Or am i missing something?

Thank you.
~Jhalek90
jackssmirkingrevenge wrote:I wonder... if you put flammable vapours inside a lady... could you get her to diesel?
POLAND_SPUD wrote:Anything is possible with the proper 3-way valve.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Tue Feb 16, 2010 12:36 am

jhalek90 wrote:ahh JSR, you make me happy like only another man should make a man happy.
Er... OK!

:D
would not the .177 cal bullet leave the muzzle faster than a .22 cal?
It would come out faster, no doubt, but it would have less energy.

A typical medium weight 0.22" pellet weights around 1 gram, while a medium weight 0.177" pellet weights about half that.

This means that if they are travelling at the same velocity, the 0.22" pellet would have twice the muzzle energy, don't forget:
Muzzle Energy = 0.5 * mass of projectile * velocity * velocity
This means that to have the same energy as a 1 gram 0.22 pellet at 500 feet per second, then the 0.5 gram 0.177" pellet has to be doing around 710 feet per second.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
POLAND_SPUD
Captain
Captain
Posts: 5402
Joined: Sat Oct 13, 2007 4:43 pm
Been thanked: 1 time

Tue Feb 16, 2010 5:38 am

ahh JSR, you make me happy like only another man should make a man happy
Now you should exchange close-ups of your feet... :shock:

just make sure you're not using cheap batteries

:D
Children are the future

unless we stop them now
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Tue Feb 16, 2010 7:00 am

POLAND_SPUD wrote:Now you should exchange close-ups of your feet...
You Polish folk sure have strange ways of being intimate :roll: :D
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jhalek90
Specialist 4
Specialist 4
Posts: 498
Joined: Fri Aug 14, 2009 5:37 pm

Tue Feb 16, 2010 3:58 pm

... no thank you. JSR's feet do not interest me, and im sure he is not interested in mine.

ahem.

Thank you JSR, I failed to notice that you were taking about muzzle ENERGY and not just velocity.

It all makes sense to me now. :lol: except the polish obsession with feet... that will never make sense. :?
jackssmirkingrevenge wrote:I wonder... if you put flammable vapours inside a lady... could you get her to diesel?
POLAND_SPUD wrote:Anything is possible with the proper 3-way valve.
User avatar
Brian the brain
Moderator
Moderator
Netherlands
Posts: 3496
Joined: Mon Dec 05, 2005 2:06 am
Location: Holland
Been thanked: 3 times

Tue Feb 16, 2010 5:33 pm

You Polish folk sure have strange ways of being intimate
Ah..Europeans..

:D

.22 barrel needs high pressure..so if you could get yourself a fridge compressor...you could enjoy it to the fullest.

Who brought those things to us BTW?
Wasn't that some crazy Polish guy??

Aaaaah!
Gun Freak wrote:
Oh my friggin god stop being so awesome, that thing is pure kick ass. Most innovative and creative pneumatic that the files have ever come by!

Can't ask for a better compliment!!
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Wed Feb 17, 2010 12:17 am

Brian the brain wrote:Ah...Europeans...
You Dutch aren't exactly exempt when it comes to questionable intimacy :roll:

:D :D :D
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jhalek90
Specialist 4
Specialist 4
Posts: 498
Joined: Fri Aug 14, 2009 5:37 pm

Wed Feb 17, 2010 5:55 pm

:3some: crazy dutch folk...
jackssmirkingrevenge wrote:I wonder... if you put flammable vapours inside a lady... could you get her to diesel?
POLAND_SPUD wrote:Anything is possible with the proper 3-way valve.
Post Reply