New Gun
Okay I am now a little experienced with pneumatics now. My gun is working perfect an I want to plan my next gun. I'm feeling like having an all metal gun with a sniper look. However, I am not going to make a wood stock or buy one. It will run using the semi auto qev assembly(post the video if u will) but I dont understand how I will refill the bottles up. I plan to set the qev up to 100psi each shot. My compresor goes up to 150psi and it's not portable. My gun needs to be portable. So what will I use as an air chamber?
-
- Specialist 3
- Posts: 350
- Joined: Sat Jun 19, 2010 3:44 pm
- Location: Tuscaloosa, AL
A CO2 bottle, and regulator should be fine for a pressure source. But depending on what your ammo is, I don't know what pressure I should suggest.. What will your ammo be?
-
- Specialist 3
- Posts: 350
- Joined: Sat Jun 19, 2010 3:44 pm
- Location: Tuscaloosa, AL
oh.. then a CO2 Regulator assembly should be fine.
-
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
Couple of large fire extinguishers in a flame thrower tank style set up, charge them up to 150, then regulate down to what ever you need. If you have a small chamber, then it will last for awhile.
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
With a true 4.5mm ID 25 inch long barrel and 110 psi I got about 400fps with steel (the "copper" BBs are steel) BBs.
If you want better performance, buy a shock pump that can go to 300-400 psi. You only need a small chamber, say one cubic inch, and it will be portable.
If you want better performance, buy a shock pump that can go to 300-400 psi. You only need a small chamber, say one cubic inch, and it will be portable.
hectmarr wrote:You have to make many weapons, because this field is long and short life
- Crna Legija
- First Sergeant 2
- Posts: 2333
- Joined: Sun Jul 20, 2008 5:14 am
- Location: australia
Both sides of the piston should be the same diameter or air will push the piston back.Proxywars wrote:Is this design accurate?
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
hectmarr wrote:You have to make many weapons, because this field is long and short life
- Brian the brain
- Moderator
- Posts: 3496
- Joined: Mon Dec 05, 2005 2:06 am
- Location: Holland
- Been thanked: 3 times
Cleaned things up a bit..
Pistol size and capable of 5 shots?
You're going to need a valve that will not dump all of the chamber volume.
As you are using bb's as ammo I'd say you are best off with high pressure and a hammer valve..
(Sorry SB15, but that is the logical choice.
)
Pistol size and capable of 5 shots?
You're going to need a valve that will not dump all of the chamber volume.
As you are using bb's as ammo I'd say you are best off with high pressure and a hammer valve..
(Sorry SB15, but that is the logical choice.
)
Gun Freak wrote:
Oh my friggin god stop being so awesome, that thing is pure kick ass. Most innovative and creative pneumatic that the files have ever come by!
Can't ask for a better compliment!!
Oh my friggin god stop being so awesome, that thing is pure kick ass. Most innovative and creative pneumatic that the files have ever come by!
Can't ask for a better compliment!!
New thought scratch the pistol and bb concept. I want to build a thing I can make. I need to start in my comfort zone which most people will agree with. All these posts of me saying "Hewp me pwease" will cease. Those are very annoying posts I made. I will only make logical posts from now on. I was wondering how can I make a hand pump to attach to my guns to pump directly from that. The pump at my level can not exceed 200psi which is reasonable. Due to the high chamber volume the pressure will have to exceed 60psi and reach a maximum of 150psi if possible. The concept of the new gun is very simple for a quick loader. A breach loaded gun(sleeve) with a ballvalve connecting it to the stock which is connected to another ball valve and the chamber. All together when the chamber valve is open the air will escape into the stock. The valve is then closed and the barrel valve is opened and pressure is released. I was wondering how big would the stock and chamber need to be and how much pressure would be approximate to fire a nail dart completely threw a splintered fence rather than going in like my Ghetto thunder (80psi 2' barrel 1' chamber 10psi loss .50cal). Also what would the sleeve be?