I didn't know where I would place this thread so....yeah
From left:
Air-gun sniper - it is a blow-gun glued to a steel-pipe and i shot .22 long cartridges with it and they go pretty far,about (98-114 feet). The stock is from my old BB-gun!
Scuba-tank-cannon - I made it about christmas last year and it was finished in february this year... I have no barrel on the pic becuse i have 6 interchangeable ones! It is very fun to shot with! The black cannon is kinda bad,thats why i did build a new one
Scuba-tank-cannon - I made this in march last year,it was hard to find parts becuse i didn't know anything about spud guns/nipples/ball valves etc. The filling-port is in the bottom of the tank.
My first cannon/gun - It is very ghetto and it looks kinda bad but it shots an empty shot-gun shell about 20 meters
Mini combustion - I made this in may this year and it shot a syringe-handle about 50-80 feet,i fuel it wiht butane from lighters...Spray An Pray
Flour gun - I shot flour with this but you can also shot potaoes with it
Down from left
Ghetto combustion bb-gun - I shot a BB about 25-30 meters with it and when i shot i feel the preassure and the bottle become a little bit hot!
A QEV - This only need an air-chamber
First combustion - i shot BBs with it and and they go 10 meters or so,it is really fun to shot with
Powerful mini combustion cannon - It turned out pretty good,i shot BBs with it and a BB flies about 35-40 meters(114-131 feet)
All my cannons(10 of them)
- AircannonSweden
- Specialist
- Posts: 131
- Joined: Thu Oct 27, 2011 11:53 am
- Location: Sweden,Linköping
Last edited by AircannonSweden on Wed Aug 08, 2012 1:21 am, edited 2 times in total.
As always,have a nice day - FPSrussia
- Mr.Tallahassee
- Specialist 3
- Posts: 364
- Joined: Sun Jul 10, 2011 2:35 am
No individual pictures or details about each one? It's kind of a pointless thread otherwise, no offense.
Sarcasm is the body's natural defense against stupid.
Petitlu wrote:My balls are made of lead and weigh 22g but I can make heavier or lighter ...
- MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
You should get one of those big tanks in the middle and cut a 1" diameter hole where the current threads are, weld new 1" threads to them and make a burst disk hybrid
edit: better yet, weld 1.25" or 1.5" threads on there. Not sure if that will be an issue for the structural integrity of the chamber at hybrid pressures but I would think it could handle a up to a 1.5" hole.
edit: better yet, weld 1.25" or 1.5" threads on there. Not sure if that will be an issue for the structural integrity of the chamber at hybrid pressures but I would think it could handle a up to a 1.5" hole.
Last edited by MrCrowley on Tue Aug 07, 2012 8:27 pm, edited 1 time in total.
- mattyzip77
- Sergeant 3
- Posts: 1249
- Joined: Tue Jun 28, 2011 12:22 pm
- Location: Taxachusetts
Nice collection you got going there. Thanks for showing us. Not pointless in my opinion. Nothing wrong with showing of your spudguns in a spudgun forum....
Go Bruins!!!!
- Mr.Tallahassee
- Specialist 3
- Posts: 364
- Joined: Sun Jul 10, 2011 2:35 am
Not quite what I meant. It would be more suited as a new thread if there were some details about each individual cannon. A new thread with no details isn't much of a thread now is it.mattyzip77 wrote:Nice collection you got going there. Thanks for showing us. Not pointless in my opinion. Nothing wrong with showing of your spudguns in a spudgun forum....
I totally agree.MrCrowley wrote:You should get one of those big tanks in the middle and cut a 1" diameter hole where the current threads are, weld new 1" threads to them and make a burst disk hybrid
It's a nice collection but I know nothing about each of the cannons.
Sarcasm is the body's natural defense against stupid.
Petitlu wrote:My balls are made of lead and weigh 22g but I can make heavier or lighter ...
- AircannonSweden
- Specialist
- Posts: 131
- Joined: Thu Oct 27, 2011 11:53 am
- Location: Sweden,Linköping
Guys,i updated with info.....
As always,have a nice day - FPSrussia
- wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
BVs and BGs, BVs and BGs everywhere
U NO QEV!? (oh wait, there is one)
Or better:
U NO HYBRID?
U NO QEV!? (oh wait, there is one)
Or better:
U NO HYBRID?
CpTn_lAw wrote: "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? "
- silentkill12345
- Private 3
- Posts: 47
- Joined: Thu Jul 19, 2012 6:40 am
- Location: BELGIUM
you could do a lot better with that qev you have there...