pneumatic spearguns...

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Fri Aug 17, 2012 2:19 pm

... are actually valveless single stroke captive piston pneumatics!

This was news to me.

No need for an external air supply, push in the spear compressing the air until the trigger sear locks et voila.
Attachments
pneumatic.gif
pneumatic.gif (8.47 KiB) Viewed 7563 times
hectmarr wrote:You have to make many weapons, because this field is long and short life
PotatoEnemy17
Specialist
Specialist
Posts: 100
Joined: Tue Apr 10, 2012 6:33 pm

Fri Aug 17, 2012 2:42 pm

Interesting, I once considered building valve based on this.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Fri Aug 17, 2012 3:31 pm

Essentially similar tothis concept, except it doesn't rely on external air and uses a piston pusher that doesn't actually leave the barrel.
hectmarr wrote:You have to make many weapons, because this field is long and short life
PotatoEnemy17
Specialist
Specialist
Posts: 100
Joined: Tue Apr 10, 2012 6:33 pm

Fri Aug 17, 2012 3:38 pm

Are you planning on building this? BTW you always supply us with links, and what you link us to tends to have more links Ect. and in the end I spend about an hour going through all these links :lol: Thanks
MRR
Specialist 3
Specialist 3
Posts: 361
Joined: Tue Feb 17, 2009 2:29 pm

Fri Aug 17, 2012 3:55 pm

I think this design could be improved with a balanced piston. There is too much stress on the trigger mechanism in my opinion.
PotatoEnemy17
Specialist
Specialist
Posts: 100
Joined: Tue Apr 10, 2012 6:33 pm

Fri Aug 17, 2012 4:00 pm

What does the water go in for anyway?
User avatar
mattyzip77
Sergeant 3
Sergeant 3
United States of America
Posts: 1249
Joined: Tue Jun 28, 2011 12:22 pm
Location: Taxachusetts

Donating Members

Fri Aug 17, 2012 4:07 pm

SPEARCHUCKER!!!!!! :lol:
Go Bruins!!!!
PotatoEnemy17
Specialist
Specialist
Posts: 100
Joined: Tue Apr 10, 2012 6:33 pm

Fri Aug 17, 2012 4:11 pm

Actually this would make an epic handheld air cann - er... not air cannon but uh... weapon thingy. Wait, these are already mass produced aren't they.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Fri Aug 17, 2012 4:13 pm

MRR wrote:I think this design could be improved with a balanced piston. There is too much stress on the trigger mechanism in my opinion.
Could be done, but how much pressure can you really generate with a single stroke, it's not *that* stressed.
What does the water go in for anyway?
... because you're underwater?

You can't leave that part full of air, because it will resist the motion of the piston. Of course water does this too but it is incompressible so it is simply being forced out.

Found the diagram on a website suggesting a "dry" barrel, where the space in front of the piston is evacuated:

Image

If they really wanted to increase power significantly though, it's easier to just stick on a schrader valve and pump a few extra psi.

*gasp* have I just suggested MOAR POWER! over better efficiency?!
hectmarr wrote:You have to make many weapons, because this field is long and short life
PotatoEnemy17
Specialist
Specialist
Posts: 100
Joined: Tue Apr 10, 2012 6:33 pm

Fri Aug 17, 2012 4:37 pm

Oh, I didn't think about that part.
User avatar
silentkill12345
Private 3
Private 3
Posts: 47
Joined: Thu Jul 19, 2012 6:40 am
Location: BELGIUM

Sat Aug 18, 2012 1:32 am

looks verry intresting :) want to see one in action
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Fri Nov 16, 2018 8:19 am

An interesting CO2 powered speargun I came across made by Crosman, it seems to be a "valveless launcher" with the spear held in place mechanically:

Image

Image

Image

Image

Image
hectmarr wrote:You have to make many weapons, because this field is long and short life
hectmarr
Sergeant
Sergeant
Argentina
Posts: 1053
Joined: Sat May 07, 2016 3:49 pm
Location: Argentina
Has thanked: 262 times
Been thanked: 260 times
Contact:

Fri Nov 16, 2018 9:25 am

Interesting. :bounce: I tried to build a single-drive air pump, but I have not been able to pass about 5 bar and even with a lever it is extremely hard to use ... Maybe it was not built correctly :oops: I will read what is published here.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Fri Nov 16, 2018 9:43 am

hectmarr wrote:Interesting. :bounce: I tried to build a single-drive air pump, but I have not been able to pass about 5 bar and even with a lever it is extremely hard to use ...
Even the best commercial "single stroke" pneumatics are very limited in power compared to what multi-pumps can do. The Parker Hale Dragon comes to mind, it can manage 11 ft lbs of energy in 0.22" which isn't bad but other pneumatics with a pre-charged chamber can easily double that and more.
hectmarr wrote:You have to make many weapons, because this field is long and short life
hectmarr
Sergeant
Sergeant
Argentina
Posts: 1053
Joined: Sat May 07, 2016 3:49 pm
Location: Argentina
Has thanked: 262 times
Been thanked: 260 times
Contact:

Fri Nov 16, 2018 2:08 pm

Very good this weapon. :) In my designs I have chosen multiple pumping because in the new pumps that I have built, which are small and compact, with not very long lever, with 6 pumps I can generate 150 ml of air at 15 bar. In the future I will try to re-plan and build a mono pump, although its benefits are lower.
Post Reply