As much as I hate taking other peoples ideas, I have a piston valve I need an air chamber design for, maybe someone has an awesome design that wouldnt mind passing down ill be using 2 inch pvc for an air chamber thanks guys
Jrrdw (this is that valve )
air chamber design wanted
-
Gippeto
- First Sergeant 3
- Posts: 2503
- Joined: Sat Jan 19, 2008 10:14 am
- Location: Soon to be socialist shit hole.
- Has thanked: 2 times
- Been thanked: 17 times
http://www.spudfiles.com/forums/pneumat ... se-f1.html
Try using that idle lump between your ears and bloody well LOOK for yourself.
Try using that idle lump between your ears and bloody well LOOK for yourself.
"It could be that the purpose of your life is to serve as a warning to others" – unknown
Liberalism is a mental disorder, reality is it's cure.
Liberalism is a mental disorder, reality is it's cure.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
jrrdw
- Moderator
- Posts: 6569
- Joined: Wed Nov 16, 2005 5:11 pm
- Location: Maryland
- Has thanked: 39 times
- Been thanked: 22 times
- Contact:
If it was my cannon I would use a piece of 2" X 7" to a 2" to 3" bushing, a 3" coupler and a piece of 3" X 12" for the chamber. That will give you about 5"s of 2" for a forward hand hold and eliminate the need for a longer 2" chamber.
jrrdw wrote:If it was my cannon I would use a piece of 2" X 7" to a 2" to 3" bushing, a 3" coupler and a piece of 3" X 12" for the chamber. That will give you about 5"s of 2" for a forward hand hold and eliminate the need for a longer 2" chamber.
Sounds like an amazing idea
-
jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
hectmarr wrote:You have to make many weapons, because this field is long and short life