SpudFiles

Hello my name is Eduard

Im new to airgun making and stuff like that. So i dont realy know if this is a good setup.



Maybe someone that could help me out with a simple design?

sorry for my bad english

Thanks in advange

That design will work and is about as simple as it gets. It would work better with a 'hammer valve' but that design will work.

Your English looks good!

Make sure it is a high-flow blowgun and the hose and its connections are at no point smaller than the hole in the valve stem. This will make your gun as efficient as possible as the air will have free passage to the valve.

Have a look at this: http://www.spudfiles.com/forums/15-high ... 17042.html

I recommend a small chamber charged to high pressure (300-400 psi) with a shock pump like this: http://www.ebay.nl/itm/Beto-MP-035-MTB- ... 53f9ebd8ca

thanks for all the information.

made a little air chamber and connected it to the blowgun.
so now we just need our pump and stock.

is there another simple design that i could use? i dont realy know how a hammer valve works... already build one but didnt know how to use is

Many thanks

Nederlander?
It would be nice if you could give your location, I could help you with some stuff

You could also try a spring loaded ball valve, or just make a piston valved gun. All the information needed to build them are on spudfiles.

Ben een nederlander ja

woon in gelderland/utrecht op de grens zegmaar.

i will send you a PM about my adress

you should make a small mag that holds about 5 shotsand you should have a bigger air tank

If the air tank is too big, the setup as he has it will become a bit too unwieldy. You really don't need a whole lot of air to propel light projectiles.

i still got a question, can i use a normal airgun barel instead of a copper pipe?
maybe i can machine is to fit the blow gun.

what are you thoughts?

Sure, no reason why you can't do that.

The blow gun wouldnt let the air through as fast as a qev or solonoid valve so you would want the projectile to be a tight fit and the valve to be as big as you can
Andrew_J