My Big Bang pop guns

Boom! The classic potato gun harnesses the combustion of flammable vapor. Show us your combustion spud gun and discuss fuels, ratios, safety, ignition systems, tools, and more.
User avatar
BowerR64
Specialist
Specialist
Posts: 129
Joined: Thu Jan 30, 2014 1:49 am

Sat Feb 01, 2014 4:49 am

My friend has a big bang cannon when i checked it out it was so simple i figured i could make something like that with PVC. His is one of the smallest ones you can buy but it sure does pop pretty loud.

I like mine better. I built one for him though

Image

These are made from 1" PVC, 2 1" PVC caps, 6" PVC for the barrel down to 3/4" PVC 6" long. 1" PVC Tee all SCH40.
The ignighter i got from walmart king grill ignighter $1.

Everything else i found around the house, the grips are from a shelf from a harbor tools aluminum gun case. The sights are from a toy gun (top) and the bottom are a shotgun fiber optics kits from walmart i used one of them for my AR15-22.

Click here for the forum rules read them.
Attachments
2 pop guns.JPG
Last edited by jrrdw on Sat Feb 01, 2014 6:49 am, edited 2 times in total.
Reason: Discussion or prohibited meterials.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Sat Feb 01, 2014 7:40 am

Neat, I really like the way you incorporated the the ignitor into the design to form a trigger guard, nice work!
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
BowerR64
Specialist
Specialist
Posts: 129
Joined: Thu Jan 30, 2014 1:49 am

Sat Feb 01, 2014 8:18 am

I almost didnt add the trigger guard but i thought ide try and it worked out ok. A little sloppy with the hot glue but i figure if i paint it you wont see the glue. Then i decided white might not get me shot so ill leave the color safe

better view of the trigger guards before i cleaned off all the ink and put on the sights.
Attachments
Pop guns1.JPG
User avatar
PeteS
Specialist
Specialist
Posts: 179
Joined: Wed Sep 11, 2013 5:53 pm
Location: Maryland
Contact:

Sun Feb 02, 2014 7:09 am

Very nice. I really like the look of them and I bet they are a lot of fun.
[center]My wife upon seeing my latest hybrid and hearing an explanation of it:
"That really isn't a potato cannon anymore, is it?"
[/center]
User avatar
BowerR64
Specialist
Specialist
Posts: 129
Joined: Thu Jan 30, 2014 1:49 am

Mon Feb 03, 2014 6:08 am

We shot them all day today at my friends watching the superbowl, we were shooting carrots, marshmellows, wads of papertowels, we even stuffed a clean female product down the front.

Ill tell ya for how much carbide we use they have some amazing power. Ide bet if i weighed the amount it would be around 1-2 grains if that.

I made a few changes to them though. When i shot a marshmellow from them at my home the rear cap blew off wich im lucky i wasnt holding it up near my face it might of gave me a fat lip. I added a screw to both caps and cut out a little notch to push in, twist and lock so the caps can both be removed but locked on under the pressure.

I built 2 larger cannons using 4" to 3" SCH40 but im not going to risk putting anything down the barrel. This gas seems to burn WAY to fast to be safe.
User avatar
BowerR64
Specialist
Specialist
Posts: 129
Joined: Thu Jan 30, 2014 1:49 am

Tue Feb 11, 2014 2:18 pm

I made a couple more from the parts i had left. Couple friends wanted one after the superbowl party.

Image
Attachments
Pop guns 5.JPG
User avatar
jrrdw
Moderator
Moderator
United States of America
Posts: 6569
Joined: Wed Nov 16, 2005 5:11 pm
Location: Maryland
Has thanked: 39 times
Been thanked: 22 times
Contact:

Donating Members

Tue Feb 11, 2014 3:31 pm

Nice collection your building there...
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Wed Feb 12, 2014 6:29 am

Have you thought of letting syringe fueling into your life? Definitely more safe and predictable than your current choice of fuel.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
BowerR64
Specialist
Specialist
Posts: 129
Joined: Thu Jan 30, 2014 1:49 am

Thu Feb 13, 2014 8:50 am

Is there any starting links to it? I have about 7 tubes of fluid that came with the grill ignighters i used for the pistols. I tried a smaller one adding a little nipple that came with the ignighter and then tried to fill it but i couldnt get any detonation so i guess im unsure how it works or needs to be mixed.

The powdered carbide seems very simple to me. It also seems fool proof, the scoops ive fixed into the back caps hold the right amount of carbide so that when they finish the reaction with the water there is the correct amount of pop. If you try to detonate the charge to early its a dud and if you try and over fill the carbide it doesnt even go off till the rear cap is removed to allow more air.

I kinda like the bang they give off as well. They dont have to be used to shoot a projectile. I built them for noise but a marsmellow is light enough and fits loose enough not to create to much pressure.

The smallest one sounds about like a 380 and the larger ones sound more like a 45 cal going off. Those with the 1" muzzle have a deeper sound then those with the 3/4" muzzle they have a higher pitch crack lik ea 9mm maybe.

I have 2 larger built cannons using 4" Tees down to a 3" reducer they take about 25-30 grains of carbide and sound more like a 223 or a 308 i have not tried to shoot anything from it but on another forum ive read about using a slightly over sized tennis ball works.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Thu Feb 13, 2014 6:30 pm

hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
BowerR64
Specialist
Specialist
Posts: 129
Joined: Thu Jan 30, 2014 1:49 am

Wed Feb 19, 2014 5:25 pm

The thing is with the powder it isnt pure acetylene nor is it pure oxygen like found in tanks. Ive just taken the old big bang cannon idea and put them in a pistol form and removed the old style spark ignighter that used flint. The amount of air and powder are still about the same.

Those little big bang cannons are made of cheap pot metal.
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Thu Feb 20, 2014 11:23 am

Caution on using PVC for Carbide Cannons. PVC is brittle and will eventually shatter. Calcium Carbide mixed with water does produce Accytelene. Accytelene has a very wide explosive range and does detonate when mixed properly. This detonation is what produces the loud sharp bang that is so attractive. Unfortunately the repeated shock to PVC will cause it to fail.
User avatar
BowerR64
Specialist
Specialist
Posts: 129
Joined: Thu Jan 30, 2014 1:49 am

Sun Feb 23, 2014 3:38 pm

Yeah thats why im not really thrilled about shooting anything out of it. The little guns we have only shot marshmellows out of it, they arnt a tight fit and they have little to no weight.

I guess i shouldnt be here because mine isnt really a "spud gun"

The first one i built i just put the caps on with my hands, hand tight and it took 2-3 shots before it blew the caps off.

Im working on a Rifle now to shoot the mini marsmellows also. The smallest marshmellows they make 1/2" i thin they are.
Attachments
PVC Rifle.JPG
User avatar
BowerR64
Specialist
Specialist
Posts: 129
Joined: Thu Jan 30, 2014 1:49 am

Sun Feb 23, 2014 7:15 pm

Technician1002 wrote:Caution on using PVC for Carbide Cannons. PVC is brittle and will eventually shatter. Calcium Carbide mixed with water does produce Accytelene. Accytelene has a very wide explosive range and does detonate when mixed properly. This detonation is what produces the loud sharp bang that is so attractive. Unfortunately the repeated shock to PVC will cause it to fail.
Maybe you think the caps are threaded?

Ive put 2 safty spots on all of these smaller guns, i put a small allen screw in both caps and i put a key cut in both connections to the tee.

These 2 spots are both pretty weak i could break them off with my fingers. They will let go and blow the caps off before the PVC lets go.

I could test them with a scale using a dowel rod and pushing down on the scale till they break off. We almost have a setup to figure the velocity of the marshmellow. We tried with just the marshmellow but i think we will need to wrap it with foil or something solid to trigger the sensors.
Attachments
Pop guns key.JPG
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Mon Feb 24, 2014 12:44 am

Neat little armory! To be honest I would still go with a quick calculated syringe squirt of propane to give more consistent results while still having a decent bang, but you seem to have the carbide thing figured out :) it could be that your ignition would have to be modified to work with butane or propane.

Any chance of a video of these things in action?
hectmarr wrote:You have to make many weapons, because this field is long and short life
Post Reply