Hi ! I need help.. for fueling..
I have been designing fueling system for 5:1 oxy-propane mix and I'm having some trouble finding a way to get correct mixture. I was thinking of using two timed solenoid valves in tandem with a chocked orifice plates after valves. Orifice plates would be sized to have a 5:1 flow of gases so both oxygen and propane would be fueled simultaneously. But, how do I calculate the flow/size of the orifices ?
My basic instinct would size the two orifices to have 5:1 cross sectional area difference for 5:1 flow, but how does the gas density etc. affect the ratio of mass flow rate ? Is it negligible ?
My chamber size is 7 litres, how would I calculate the time needed for valves to be open / what is the flowrate through the orifices ?
My cannon can handle the mix easily, so no need to talk about that for now and solenoid valves will be sealed from blast with my 500bar rated ss /ptfe ball valves. Cannon is actually used as hybrid now, but I'm looking to try atmospheric oxy-propane mix to do some testing.
Thanks for help ! I will post pics here when building the fueling system
Boom! The classic potato gun harnesses the combustion of flammable vapor. Show us your combustion spud gun and discuss fuels, ratios, safety, ignition systems, tools, and more.
1 post • Page 1 of 1