HYBRID FUELING 101

Harness the power of precision mixtures of pressurized flammable vapor. Safety first! These are advanced potato guns - not for the beginner.
Gunner
Specialist
Specialist
Posts: 111
Joined: Sun Oct 21, 2007 9:05 am

Wed Jul 16, 2008 9:45 am

OK...what is the volume ratio because I have LP gas, can I use 0.96:0.04?

(Edit: No problems anymore :wink: )
Back in business!
User avatar
LCTChamp
Specialist
Specialist
Posts: 188
Joined: Thu Aug 21, 2008 8:01 am

Sun Oct 19, 2008 6:22 pm

i understand the how much propane to put in its the air thats confusing me. For a 2x mix you would just add 14.7psi of air?
User avatar
SpudUke5
Sergeant
Sergeant
Posts: 1099
Joined: Tue Sep 04, 2007 10:16 pm

Sun Oct 19, 2008 6:58 pm

Yes but you would also add twice as much propane so that your mixture is combustible.
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
fogus
Private 2
Private 2
Posts: 33
Joined: Wed Oct 22, 2008 4:10 pm

Tue Nov 11, 2008 6:18 pm

OK, I believe I have a recipe for filling a hybrid combustion tank in my head.

It is:

1. Decide on what --X (compression ratio) you want to end up with.
2. Assuming your chamber is filled with 14.7PSIa of air:
3. Raise the pressure of the chamber to 14.7 + 0.62 = 15.32 PSIa using propane. (I will consider this a nominal 1X mix).
This will read 0.62 PSI on a gauge.
4. Continue to raise the pressure of the chamber using propane, until it reaches 15.32 + 0.62*(X) PSIa, where X is the compression ratio you are using.
This will read 0.62*(X+1) PSI on your gauge.
5. Using air now, raise the pressure to 15.32 + 0.62(X) + (14.7-0.62)*(X) = 15.32 + (X)*(14.7) PSIa. This will read 0.62*(X+1) + (14.7-0.62)*(X)
= 0.62 + 14.7(X) PSI on your gauge.

Did I screw up anywhere?
~fogus
User avatar
POLAND_SPUD
Captain
Captain
Posts: 5402
Joined: Sat Oct 13, 2007 4:43 pm
Been thanked: 1 time

Tue Nov 11, 2008 7:04 pm

uhmmm yes you did....

1x mix is a 'proper' mix of air and propane at atmospheric pressure
2x mix is a mix of air&propane at 2atm and so on
Children are the future

unless we stop them now
fogus
Private 2
Private 2
Posts: 33
Joined: Wed Oct 22, 2008 4:10 pm

Tue Nov 11, 2008 7:38 pm

POLAND_SPUD wrote:uhmmm yes you did....

1x mix is a 'proper' mix of air and propane at atmospheric pressure
2x mix is a mix of air&propane at 2atm and so on
Yes, that's why I called it a nominal 1X mix. It is 0.62 PSI above a true 1X mix, but it makes it easier to do the calculations. A my starting nominal 1X actually about a 1.042X mix.
~fogus
User avatar
FishBoy
Corporal
Corporal
Posts: 575
Joined: Tue May 27, 2008 5:51 am

Mon Dec 08, 2008 4:26 pm

For manometric metering, how accurately should the chamber volume be measured? (I am planning to fill it with water and then pour the water into graduated cylinders)
"You polish a turd, it's still a turd"

Remember DYI!!!
User avatar
Ragnarok
Captain
Captain
Posts: 5401
Joined: Tue Dec 19, 2006 8:23 am
Location: The UK

Mon Dec 08, 2008 4:44 pm

FishBoy wrote:For manometric metering, how accurately should the chamber volume be measured?
Your error can be as large as all the oceans in the world, and it still wouldn't matter.

You don't need to know any chamber volume for a manometric meter. You could take one off a cannon of one size, then bolt it to one of any other size, and you wouldn't need to adjust a single thing.
Does that thing kinda look like a big cat to you?
User avatar
FishBoy
Corporal
Corporal
Posts: 575
Joined: Tue May 27, 2008 5:51 am

Mon Dec 08, 2008 4:58 pm

I understand that, I just had a brain lapse/poor wording combo. Anyway, for the mix calculations, how accurately does the chamber volume need to be measured?
"You polish a turd, it's still a turd"

Remember DYI!!!
User avatar
Larda
Specialist
Specialist
Posts: 119
Joined: Wed Jul 18, 2007 7:52 am
Location: Sweden

Donating Members

Tue Dec 09, 2008 1:22 am

FishBoy:
You can use the same numbers for any chamber size.
Push to test... Release to detonate.
User avatar
trigun
Specialist
Specialist
Posts: 161
Joined: Mon Jan 26, 2009 11:21 pm
Location: Illinois

Tue Feb 10, 2009 5:27 pm

I built my hybrid i cant get it to fire. My gap is .01 of an inch. I know as a fact it is firing due to small circuit gap installed by the firing switch. Idea from one of PCguys guns. My chamber is 61.023 cubic inches. Meter is 5.858 cubic inches. I am using manometric metering for air and filling it to 3 bar for a 4x mix. Does that sound correct. Also with 26.494 psi in the meter.
User avatar
starman
Sergeant Major
Sergeant Major
United States of America
Posts: 3027
Joined: Wed Dec 12, 2007 12:45 am
Location: Simpsonville, SC

Donating Members

Tue Feb 10, 2009 6:22 pm

I'm guessing your total mix is rich.

I did a quick calc on it and it's tad rich but I think in the ball park. Are you injecting your fuel first in a freshened atmosheric pressure chamber? That's going to add about 2.5 psi to your chamber. After that, you'll need to run the total pressure with air up to about 46.6 - 47 psi. This is all assuming you're still getting a good spark...the gap sounds plenty small.

If still no success, step back a bit and try a much smaller mix, 2x or even smaller. Ignition troubles won't show up as much then. Your chamber is smallish but not out of the typical hybrid realm. However, small chambers require more precise fueling.

Edit: OH.. did you burp your meter well first...meaning, it's originally full of air. Loading it with fuel mixes the fuel and 1 atm of air making for a lean overall shot. After the meter shot, 1 atm of a fuel air mix is left behind.

Burping means just filling and shooting the meter several times to where the gas left behind in the meter is all fuel and no, or very little air.

Edit 2: And another...since your meter is a fairly low pressure model, you may need to compensate for the fact that the chamber pressure rise to 2.5 psi will also be the final resting pressure in the meter, therefore not allowing all of the fuel to release from the meter. However, since your fuel load looks a tad rich you may have already compensated for that. Just something to check.
User avatar
trigun
Specialist
Specialist
Posts: 161
Joined: Mon Jan 26, 2009 11:21 pm
Location: Illinois

Tue Feb 10, 2009 6:57 pm

Thanks starman i actually found out i made a very critical error in my fuel meter volume. I was off by about a 3 cubic inches which adds up really fast ! thanks for the suggestions i did burp by meter actually.

Your peanut apprentice, trigun
User avatar
ramses
Staff Sergeant 2
Staff Sergeant 2
United States of America
Posts: 1679
Joined: Thu May 29, 2008 6:50 pm

Tue Mar 03, 2009 5:13 pm

noob question, but would this be acceptable for manometric metering. Apparently it is "accurate to 1.0 psi." it reads to .1psi, so it is probably more precise than that.

I am hoping that the seller knows about the difference between accuracy and precision, so that once I know by experimentation how much it is off, I can adjust accordingly. As a bonus, it has a built in regulator.
POLAND_SPUD wrote:even if there was no link I'd know it's a bot because of female name :D
fogus
Private 2
Private 2
Posts: 33
Joined: Wed Oct 22, 2008 4:10 pm

Tue Mar 03, 2009 5:48 pm

It almost seems like a mistake. He might have meant to say, "precise to within 0.1 psi".

I'd ask.
~fogus
Post Reply