My Hybrid!
- wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Well, I´m in holidays now, so damages must be made
So, I thought it´s about the time for me to go hybrid , as I got 2 tazers.
Specifications:
Chamber: 1" 30cm iron(I think) pipe.
Burst disc: soda can.
Mix: don´t know how high I will reach, but as long as the spark happens
Fuel: Butane.
Barrel: 1/2 steel tube.
About the gun, I must say there are nothing special on it, the only part that I really spent time on is the charging plug, machined from a aluminium rod on my drill press.
Video on Tuesday/Wednesday
Edit: video at page 7 and 10
So, I thought it´s about the time for me to go hybrid , as I got 2 tazers.
Specifications:
Chamber: 1" 30cm iron(I think) pipe.
Burst disc: soda can.
Mix: don´t know how high I will reach, but as long as the spark happens
Fuel: Butane.
Barrel: 1/2 steel tube.
About the gun, I must say there are nothing special on it, the only part that I really spent time on is the charging plug, machined from a aluminium rod on my drill press.
Video on Tuesday/Wednesday
Edit: video at page 7 and 10
Last edited by wyz2285 on Fri Oct 19, 2012 1:39 pm, edited 2 times in total.
CpTn_lAw wrote: "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? "
-
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 8:22 pm, edited 1 time in total.
- wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
I´m thinking about 1m, should be enough
CpTn_lAw wrote: "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? "
- wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Mix question: The chamber volume is 210 ml, I´m using butane so it´s 3.5% of the chamber volume per mix right? Just want to make sure before I do anything stupid.
I will syring meter the fuel and inject from the muzzle.
I will syring meter the fuel and inject from the muzzle.
CpTn_lAw wrote: "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? "
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
HAHA! Another one joins the dark side
Technically for butane only it's 3.2%, so you need to inject 6.7mL per mix number. Check out the syringe injection thread, I explain it in detail.wyz2285 wrote:Mix question: The chamber volume is 210 ml, I´m using butane so it´s 3.5% of the chamber volume per mix right? Just want to make sure before I do anything stupid.
I will syring meter the fuel and inject from the muzzle.
hectmarr wrote:You have to make many weapons, because this field is long and short life
- wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
I read it, sounds simple.
How did you find out the pumps dead space? I will use a compressor to charge it, how am I going to do that and why? If the gauge from the pump/compressor reachs the correct pressure that means that chamber has the same pressure as well.
How did you find out the pumps dead space? I will use a compressor to charge it, how am I going to do that and why? If the gauge from the pump/compressor reachs the correct pressure that means that chamber has the same pressure as well.
CpTn_lAw wrote: "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? "
You have to know approximately for low mixes. You just check your air line Inner diameter, and the length of it. pi*r²*L and voilà... volume.
Nice hybrid by the way wyz!
Nice hybrid by the way wyz!
"J'mets mes pieds où j'veux, et c'est souvent dans la gueule."
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
Say you're using a blowgun style filler, the dead volume is everything past the blowgun valve. Want to know the exact volume? Fill it with water That's how I did it.wyz2285 wrote:I read it, sounds simple.
How did you find out the pumps dead space? I will use a compressor to charge it, how am I going to do that
In the same way that air goes in the chamber, fuel is going to flow out of the chamber and into this dead volume. If you don't take this into account, your mix will be off.and why? If the gauge from the pump/compressor reachs the correct pressure that means that chamber has the same pressure as well.
hectmarr wrote:You have to make many weapons, because this field is long and short life
- wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Hum, or a check valve between the fill port and compressorIn the same way that air goes in the chamber, fuel is going to flow out of the chamber and into this dead volume. If you don't take this into account, your mix will be off.
CpTn_lAw wrote: "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? "
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
As long as you take into account the cracking pressure of the valve and add this to the total pressure required
hectmarr wrote:You have to make many weapons, because this field is long and short life
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
How dare you!
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
I was waiting for your comment Gun Freak
Don´t worry, this is my last (big bore) hybrid
Edit: No! This is only the beginning
Don´t worry, this is my last (big bore) hybrid
Edit: No! This is only the beginning
Last edited by wyz2285 on Mon Apr 16, 2012 2:25 pm, edited 1 time in total.
CpTn_lAw wrote: "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? "
- wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Video 5x
More to come.
Hybrid it´s the best thing ever!!!!!
[youtube][/youtube]
More to come.
Hybrid it´s the best thing ever!!!!!
[youtube][/youtube]
CpTn_lAw wrote: "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? "
- mobile chernobyl
- Corporal 3
- Posts: 756
- Joined: Sun Dec 03, 2006 11:53 am
- Been thanked: 7 times
Labcoats... and a bench that wouldn't be sanitary to eat off of even if there was a place mat over all of it lol. Nice.
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
mobile chernobyl wrote:Labcoats...
Excellent! Mad science at its best
Heard that Gun FreakHybrid it´s the best thing ever!!!!!
hectmarr wrote:You have to make many weapons, because this field is long and short life