SpudFiles

hello guys i have been looking around for a while and i am ready to move on to a hybrid cannon. i will be using a tank (found at my dads work) for that chamber and a 1 1/4 union.. i was jsut wondering what some good burst discs are for 2x-6x mixes.. thanks for all ur help

g-money

alluminum foil.

aluminium foil is rather leaky... im building the 20x mix cannon with a pneumatic cilinder burst pressure 725 bar
tryd alu foil in my union but it leaked as hell

umm, i somehow doubt that. if you live through the massive explosion that ensues, tell me how fast the projectile went. and i want numbers!!!!!!!! not guesses!!!!

i think you should reasearch a little bit more. 40X is ALOT of power.........

Remind me to laugh at you when you're 20x cannon doesn't work. It's going to need a spark gap the size of an Ebola virus particle, and propane liquefies at merely an 8x or 9x mix. Good luck with that.

This shall be very interesting indeed though I doubt the 20x mix will work. If you lose any bodily part or function you cannot say we didnt warn you. Also aluminium cans should work.

noname wrote:Remind me to laugh at you when you're 20x cannon doesn't work. It's going to need a spark gap the size of an Ebola virus particle, and propane liquefies at merely an 8x or 9x mix. Good luck with that.

I dont use propane. i use gasoline gas.
I work as a petrochemic and i know i can compresss gasoline till 20 bar..
a normal moped compresses air and gasoline to 14 bars 8)
So its going to fire... and for losing arms and legs.. no problem remote ignition
Aluminium cans i hope they can held 8 bar for a 9 times mix

You are going to incur Detonation for sure....Ever heard of DDT?There are studies on DDT used for jet engines and studies on them.They use long thin Aluminium tubes with walls 3mm thick,and just from the detonation of that it can warp the aluminium tubes and the amount of Atmospheres they use are no were near 20X....This is no joke Darwin Award Material.

Do you know wich chamber i use ....
burst presure 725 bar... 6.5 cm thick stainless steel.. pneumatic cilinder
And dude im a chemist do you think i dont know about ddt ,Does ddt ocurs in a motor cycle? they compress gasoline to 14 bars with air.. and no ddt 8) .. I have my own explosives like annnm, acetonperoxide,mhn,nitrostrach,guncotton,NG
Im a hobby chemist for 5 years now.. so i know alot about explosives :roll:And 20x mix is my goal but ill go up from 4 to 8 to 12 to 16 mix....to 20

CannonBall wrote:Do you know wich chamber i use ....
burst presure 725 bar... 6.5 cm thick stainless steel.. pneumatic cilinder
And dude im a chemist do you think i dont know about ddt ,Does ddt ocurs in a motor cycle? they compress gasoline to 14 bars with air.. and no ddt 8) .. I have my own explosives like annnm, acetonperoxide,mhn,nitrostrach,guncotton,NG
Im a hobby chemist for 5 years now.. so i know alot about explosives :roll:And 20x mix is my goal but ill go up from 4 to 8 to 12 to 16 mix....to 20

Where did you graduate from?

Proces operater (petro chemic)... and a home studie chemistry.. wy?

CannonBall wrote:Proces operater (petro chemic)... and a home studie chemistry.. wy?

I meant like what college. I'm studying for a Chemistry major. Just was curious.

Ignition shouldn't be too difficult... all you need is a lightening rod right

<img src="http://www.piepalace.ca/blog/wp-content ... _knapp.jpg">

I live in holland.
Proces operater at (zadkine) college

Whatever science dude chemical head.
Tell us WHEN it works.

Peace
Scotty