Adjustable BBMG

discasi · Mon Nov 05, 2012 8:49 pm

I just want to know how old are you because if you are more then 20 years old i think that it will be very difficult to do the gun because i never build anything because i am an teen

Check out my YouTube SpudGun Channel! · Mon Nov 05, 2012 9:42 pm

discasi wrote:And could you tell me how did you cut the wood piece in to two pieces. And how did you dig into the wood so that you can then put the gun and what is the tool that you use.

He mentioned it in the first post:

The stock is made of two poplar planks that I inletted with a chisel and a Dremel tool. The two sides are held together with 5mm bolts so I can easily tear down the gun to service it (though with the only moving part being the bb's, there isn't much to service).

archie370 · Mon Nov 05, 2012 11:16 pm

im a teen and , your question doesn't make sense ... ? would it be harder if your older than 20 ?

Check out my YouTube SpudGun Channel! · Mon Nov 05, 2012 11:26 pm

archie370 wrote:im a teen and , your question doesn't make sense ... ? would it be harder if your older than 20 ?

He was referring to the OP, not you.

He means that he doesn't think he can build something like that because he is only a teenager. If someone is older, they are more likely to have more experience in fabrication, wood working, or whatever.

discasi, most members here are probably in their teens. A more important factor than age is experience, there are some pretty young members who are very good at building these type of guns. That being said, something like this just takes a lot of patience and a little bit of skill. Plan your design thoroughly, think it through, go over it to make sure there are no mistakes. Mark the areas on the wood correctly and take your time as you cut the wood. Then you just need to use files, chisels, routers or whatever to make it look nice.

discasi · Tue Nov 06, 2012 4:40 pm

what do i whrite in the shearch in youtube to see how you mades it

Check out my YouTube SpudGun Channel! · Tue Nov 06, 2012 4:45 pm

discasi wrote:what do i whrite in the shearch in youtube to see how you mades it

There is no guide of how he made it.

Usually there are no guide/how-to's/blueprints/plans for cannons on this forum. You need to do your own research and learn from cannons made by other people so you can collect enough information to build your own cannon.

We will not give you plans to make your own cannon. You need to do your own research. If you have problems or questions, you may ask them on the forum. You should start building some basic cannons. Once you have experience, you will learn how to make more advanced cannons. There is no easy way to build a good cannon when you have no experience or knowledge of how to build it.

What country are you from? We may have other members from that country who can also help you.

archie370 · Tue Nov 06, 2012 5:25 pm

Want to make semi auto for beginners , search how to make semi auto in search bar in spudfiles look for JSR and you can build this gun for less than 30 $ au ... Research quick exhaust valves, pilot valves else you will not be able to make it .... And if you are really stuck then we will help u ... Good luck