SpudFiles

Hello,

I recently posted a topic in my interest in building a BB mg and received allot of help from jackssmirkingrevenge

anyways..

I need a QEV, i just find allot of different features and allot of different brand names.

Take a look what's the dif between those two?

https://mail-attachment.googleuserconte ... -z3gKg6aLM

Oh and btw ordering from ebay and amazon is not an option since it doesn't ship to where i live

Your link isn't working...

try this

http://www.qfpost.com/z/45a0IxyyZ.jpg

From what i know, a QEV is a QEV, i didn't know there are multiple types of them.. If you could just point me what QEV type i am looking for between the two in my link that'd be great

Thanks

Like one of them is a QV and the other is a QX... and one of them has a dotted line on the graph and the other is a straight line.. i asked the seller he told me they are the same but i don't belive him

Your link is useless. Are these what you are trying to link to?

http://www.china-stnc.com/en/Other-valv ... QV-06.html

http://www.china-stnc.com/en/Other-valv ... XQ-M5.html

Yes..I need to know the difference between those two

I think the second link displays enough info about both of the QEV's though.
Thanks!

What are you trying to build?
You post about about .177 BB machine gun and also about using QEV for another project.
You need to be more explicit in your post!

I initially wanted to build a .177 BB machine gun with a QEV and a pop off valve and a 3000psi paintball tank and a regulator, but then jackssmirkingrevenge came up with another idea that i should directly connect the barrel to the air tank with a high pressure trigger.

Basically i want to try both designs, that's why i need to know which QEV people around here usually chose.
Thanks!

Both types of QEV's have been used successfully.
The rectangular shaped ones would have a narrower width than the round ones. That is what I would use.
JSR's links will assist you.

So basically just the difference is the looks?

Basically i want to try both designs, that's why i need to know which QEV people around here usually chose.
Thanks

I've used the ones on the right, the round ones.
They work very well at pressures up to 900 psi.

If you stick to .177 projectiles and HPA however, I must insist you go for the pressurewasher trigger and forget the QEV.

You will only waste propellant gas on piloting the piston without any increase in performance.

Surely, you can control the rate of fire, but a pressurewasher valve has more than enough flow ( more than 100%) to launch .177 bb's at tremendous speed.

As the HPwasher valve opens the first couple of shots ( things happen fast) the valve might not be open fully.But from then on they get 100% flow.

in a QEV -pop-off situation you will loose pressure to all moving parts, to piloting and to filling the dead spaces over and over each pop.

If you want top performance, make the bb reservoir as small as you can.
Just big enough to fit the number of bb's you prefer.
Anything more will just be dead space.

Alright thanks allot!

When i'm done building it i will post it here!

Cheers!