BBMG air sources

Building or modifying BB, Airsoft, and Pellet type of guns. Show off your custom designs, find tips and other discussion. Target practice only!
nicksam112
Private
Private
Posts: 13
Joined: Sun Jun 02, 2013 3:50 pm

Sun Jun 02, 2013 3:54 pm

Hey y'all
I was wondering i you guys could help me. I've been wondering what you guys typically use as an air source to power your BBMG's?
I've been looking into using paintball tanks, but there doesn't seem to be any easy/cheap way to regulate the pressure down to a safe pressure like 100 psi
Thanks in advance!
User avatar
PaperNinja
Specialist
Specialist
Posts: 190
Joined: Sun Jun 17, 2012 7:51 pm
Location: Droneland

Sun Jun 02, 2013 4:42 pm

this + this = win

Paintball tanks are fine.
nicksam112
Private
Private
Posts: 13
Joined: Sun Jun 02, 2013 3:50 pm

Sun Jun 02, 2013 4:55 pm

Wow, that's pretty clever
Mind giving some more details on setting that up?
Thank you!
nicksam112
Private
Private
Posts: 13
Joined: Sun Jun 02, 2013 3:50 pm

Sun Jun 02, 2013 5:48 pm

Also if anyone else could share their solutions it would be hugely appreciated
User avatar
PaperNinja
Specialist
Specialist
Posts: 190
Joined: Sun Jun 17, 2012 7:51 pm
Location: Droneland

Sun Jun 02, 2013 5:55 pm

1. Edit your post rather than double-posting :)

2. Screw the tank adapter onto the tank, then attach a 1/8" NPT male-male fitting between it and the regulator intake. Attach a 1/8" NPT male-* to the regulator output. The star can be male or female depending on your setup, I can't help you more without more details of your situation.
nicksam112
Private
Private
Posts: 13
Joined: Sun Jun 02, 2013 3:50 pm

Sun Jun 02, 2013 6:39 pm

Sorry about that

Sounds good though, I'll definitely give this a shot.
My only concern is if that regulator is strong enough to handle that kind of pressure, have you actually used that setup?
Thanks
User avatar
PaperNinja
Specialist
Specialist
Posts: 190
Joined: Sun Jun 17, 2012 7:51 pm
Location: Droneland

Sun Jun 02, 2013 6:50 pm

Yes I've used it. You can see see a picture of my (quite ugly) set up of it in the link in my signature.
User avatar
Lockednloaded
Staff Sergeant
Staff Sergeant
United States of America
Posts: 1566
Joined: Thu Sep 03, 2009 9:38 pm
Location: Texas, USA
Been thanked: 6 times

Sun Jun 02, 2013 10:34 pm

Can that regulator you linked handle unregulated co2?
I love lamp
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2503
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 17 times

Donating Members

Sun Jun 02, 2013 11:02 pm

Lockednloaded wrote:Can that regulator you linked handle unregulated co2?
Not a snowballs chance in hell. :roll:

At the OP, would suggest this;

http://www.hustlepaintball.com/Ninja-Pa ... r-HPA-Tank

And this;

http://palmer-pursuit.com/cart/female-s ... naaugk5c67
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Mon Jun 03, 2013 2:54 am

When you say "safe" pressure, do you mean safe "it won't blow up" or safe "I will use it for skirmishing shooting at other people"?
PaperNinja wrote:this + this = win*
*BOOM

The lowest a Ninja type tank can go is 400 psi.

The regulator you linked to is not made to handle this input pressure.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
PaperNinja
Specialist
Specialist
Posts: 190
Joined: Sun Jun 17, 2012 7:51 pm
Location: Droneland

Mon Jun 03, 2013 11:55 am

EDIT: I seem to be completely wrong about the regulator :(
I'm not sure why I thought it was safe before as I try to be as cautious as possible

Maybe I'll go back into hiding and stop trying to give people advice :lol:

I will say,however, that safe or not I've used it with a pball tank with no problems.
nicksam112
Private
Private
Posts: 13
Joined: Sun Jun 02, 2013 3:50 pm

Mon Jun 03, 2013 4:56 pm

Ouch, 80 bucks for a regulator seems like a bit much.

It seems like there's a "Pro SLP" version of the ninja paintball tanks that can go down to 275 psi. Think I could use that tank and then hook it up to this regulator: http://www.amazon.com/Dixon-R08-02RG-Wi ... +regulator?
It wouldn't really be pushing it safety wise, and it seems as if it'd work
When you say "safe" pressure, do you mean safe "it won't blow up" or safe "I will use it for skirmishing shooting at other people"?
Safe as in it won't explode, I'm not shooting this at other people, so the only safety I have to worry about is my own
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Mon Jun 03, 2013 10:15 pm

nicksam112 wrote:Safe as in it won't explode, I'm not shooting this at other people, so the only safety I have to worry about is my own
You can easily build a BBMG that can take 400 or even 800 psi safely without exploding, and believe me the power from such high pressures is amazing, this is with airsoft BBs:

[youtube][/youtube]
hectmarr wrote:You have to make many weapons, because this field is long and short life
nicksam112
Private
Private
Posts: 13
Joined: Sun Jun 02, 2013 3:50 pm

Mon Jun 03, 2013 11:02 pm

I'm guessing that kind of system is using metal piping?

I was looking to use PVC pipe since it's cheap and I have plenty lying around, so at the moment I'm shooting for 100 psi just for safety.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Mon Jun 03, 2013 11:24 pm

Some stainless pipe I had lying around and some epoxy thrown in for good measure :)

Image

here's the thread: http://www.spudfiles.com/forums/hpa-air ... 21457.html

Given the way BBMGs work, you could probably use 275 psi directly in an appropriately rated PVC tee, just maybe add a pop-off valve for safety.

Remember that in regular operation, you never get high pressures in the BB chamber. I had made a vortex BBMG and even though I was feeding 100 psi, the pressure in the chamber never exceeded 20 psi. The worst case scenario is a BB getting stuck in the barrel though, so your chamber should always be able to take the full pressure your chamber is feeding.
hectmarr wrote:You have to make many weapons, because this field is long and short life
Post Reply