Single shot airsoft

Building or modifying BB, Airsoft, and Pellet type of guns. Show off your custom designs, find tips and other discussion. Target practice only!
hectmarr
Sergeant
Sergeant
Argentina
Posts: 1053
Joined: Sat May 07, 2016 3:49 pm
Location: Argentina
Has thanked: 262 times
Been thanked: 260 times
Contact:

Sat Jul 29, 2017 9:47 pm

Ok, it's fine. It is better to make the videos when everything is well finished. Thanks and regards !
User avatar
farcticox1
Sergeant
Sergeant
Posts: 1077
Joined: Sun Mar 31, 2013 12:37 pm
Has thanked: 68 times
Been thanked: 93 times

Sun Jul 30, 2017 6:07 pm

So I got it finished quite quickly today, 2 barrel sleeves and spacers made and painted. Turned out looking better than I ever thought it could. Barrel extension is removable with 2 bolts, stock with 1 bolt.
finished.jpg
finished bolt.jpg
Fully assembled weight is 3.25Kg (7.2Lbs) length is 1015mm (40") Barrel is 6mm ID/10mm OD seamless stainless, total length 600mm (from breach) 23.5".
short barrel is 280mm (11") the extension is 320mm (12.5")
The lower body is the chamber, 1" PVC. The main valve is a 3/8" QEV off Ebay, trigger is a 1/8" 3/2 limit switch.
20170505_194112.jpg
1.jpg
All the aluminum parts are made from scrap pieces I collected, all hand fabricated, probably 40 to 60 hours to put it together , I never keep track really cause I make parts as I go along for more than one project at a time :shock:

Onto the next project, I have 2 I'm working on, maybe another one after that :idea: , and I do still have that piece of 1/2" seamless tubing :idea: :idea: :idea:
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Mon Jul 31, 2017 9:13 am

Another great project, nicely done!
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
farcticox1
Sergeant
Sergeant
Posts: 1077
Joined: Sun Mar 31, 2013 12:37 pm
Has thanked: 68 times
Been thanked: 93 times

Tue Aug 01, 2017 2:49 pm

Just gonna make a couple of extra parts for it, trigger guard and a barrel cover when the extension is not on, like a birdcage flash hider
birdcage.jpg
birdcage.jpg (13.39 KiB) Viewed 5047 times
Did a rough chrono check with the Android app, 0.2g BBs = 300fps with long barrel, 280fps with short. :o


Will try and get some heavier BBs, maybe 0.4s, especially as my next project has a much longer barrel.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Tue Aug 01, 2017 6:37 pm

Did a rough chrono check with the Android app, 0.2g BBs = 300fps with long barrel
That's... not too impressive if accurate to be honest. With a QEV and I'm guessing 100-150 psi you should be going upwards of 500 fps easily with 0.2g BBs. I think you need a proper chrony, they can be had for less than 100 dollars ;) Supersonic BBs are within reach if you ever decide to go to higher pressures.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
farcticox1
Sergeant
Sergeant
Posts: 1077
Joined: Sun Mar 31, 2013 12:37 pm
Has thanked: 68 times
Been thanked: 93 times

Tue Aug 01, 2017 6:46 pm

yes, on my wish list, or my 'to build' list :idea:
User avatar
farcticox1
Sergeant
Sergeant
Posts: 1077
Joined: Sun Mar 31, 2013 12:37 pm
Has thanked: 68 times
Been thanked: 93 times

Wed Aug 02, 2017 4:32 pm

The finishing touches, flash hider under construction
20170802_163511.jpg
The finished project in short barrel
20170802_175930.jpg
20170802_175902.jpg
Now for the video
User avatar
Xamllew
Private 4
Private 4
Posts: 98
Joined: Sun Aug 21, 2016 11:00 pm
Location: Belgrade
Has thanked: 2 times
Been thanked: 4 times

Thu Aug 03, 2017 12:26 am

Nice work on the flash hider, looks very clean overall. I like how the stock is built off of the chamber. Looking forward to the video.
User avatar
farcticox1
Sergeant
Sergeant
Posts: 1077
Joined: Sun Mar 31, 2013 12:37 pm
Has thanked: 68 times
Been thanked: 93 times

Thu Aug 03, 2017 7:06 am

So here is the video, it is 4 joined together, not great quality.

This is how the barrel attaches
video (2).jpg
video (3).jpg
[youtube][/youtube]

Still bugged by poor accuracy, I think the barrel material is actually too tight, it is 6mm ID but not precision tube, if you drop a BB in the barrel it will not freely drop through, my older BB attempts use 7mm ID tube with 1/4' (6.4mm) ball bearings and they are very accurate at close distance, so I might try polishing out the barrel especially the extension, I think the little bumps are acting like multiple hop ups so the BB can go in any direction. :idea:
User avatar
farcticox1
Sergeant
Sergeant
Posts: 1077
Joined: Sun Mar 31, 2013 12:37 pm
Has thanked: 68 times
Been thanked: 93 times

Thu Aug 03, 2017 4:07 pm

Polishing made a huge difference, started with a round file down the bore and sliding it back and forwards for a couple of minutes, then some fine abrasive cloth on a rod until the BB would fall through. I have a piece of M6 silver steel rod which is pretty much 6.00mm OD, will cut a piece of this and use as a gauge and keep polishing until it goes all the way through both barrels.
User avatar
farcticox1
Sergeant
Sergeant
Posts: 1077
Joined: Sun Mar 31, 2013 12:37 pm
Has thanked: 68 times
Been thanked: 93 times

Thu Aug 03, 2017 7:09 pm

farcticox1 wrote:just did a very quick test as I plan on using some 7mm ID tube to shoot 6mm airsoft as I need the barrel curved.
With a straight 18" barrel, 7mm ID tube, at 10 feet, fired 4 shots, 2 went through the same hole, 1 was 1/4" off, 1 was 1/2" off.
Good enough for me.
Well that's interesting, apparently I did that 2 years ago :shock:
hectmarr
Sergeant
Sergeant
Argentina
Posts: 1053
Joined: Sat May 07, 2016 3:49 pm
Location: Argentina
Has thanked: 262 times
Been thanked: 260 times
Contact:

Fri Aug 04, 2017 4:21 pm

Cute, cute and very cute this I see. :bounce: :bounce: :bounce:
Clean work and every shot you make save your own construction. Nothing cuter than that. I congratulate him. regards
hectmarr
Sergeant
Sergeant
Argentina
Posts: 1053
Joined: Sat May 07, 2016 3:49 pm
Location: Argentina
Has thanked: 262 times
Been thanked: 260 times
Contact:

Thu Jan 18, 2018 6:50 pm

jackssmirkingrevenge wrote:
Did a rough chrono check with the Android app, 0.2g BBs = 300fps with long barrel
That's... not too impressive if accurate to be honest. With a QEV and I'm guessing 100-150 psi you should be going upwards of 500 fps easily with 0.2g BBs. I think you need a proper chrony, they can be had for less than 100 dollars ;) Supersonic BBs are within reach if you ever decide to go to higher pressures.
I want to know about BB of 0.2 gr supersonic. Have you done any of this Jack? ...
User avatar
farcticox1
Sergeant
Sergeant
Posts: 1077
Joined: Sun Mar 31, 2013 12:37 pm
Has thanked: 68 times
Been thanked: 93 times

Thu Jan 18, 2018 7:26 pm

more pressure :shock:
hectmarr
Sergeant
Sergeant
Argentina
Posts: 1053
Joined: Sat May 07, 2016 3:49 pm
Location: Argentina
Has thanked: 262 times
Been thanked: 260 times
Contact:

Thu Jan 18, 2018 7:57 pm

Yes, I know that, but how much more pressure? ... :shock: I need a fairly broad approach, nothing exact ...
I want to shoot with a hybrid of 02 gr BB. The problem is that I do not have a chronograph. In my country, they are very expensive.
Post Reply