Page 1 of 1
Question about Vortex
Posted: Sat Nov 11, 2006 7:37 pm
by kyle1292
should the bbs just fit in the vortex or should they be able to move side to side as well?
Posted: Sat Nov 11, 2006 7:50 pm
by noname
A vortex block too thin will jam more, make it 1/2" thick or thicker.
Posted: Sat Nov 11, 2006 7:52 pm
by MrCrowley
http://www.burntlatke.com/bb.html took me 1min of searching in google kyle you have a habbit of doing this, next time just remember to search first....the burnt latke link there has step-by step instructions on how to build it.
Posted: Sat Nov 11, 2006 9:10 pm
by noname
That wasn't what he was asking. I'm pretty sure he knows perfectly well how to build a vortex block, he was just questioning how thick it should be.
Posted: Sat Nov 11, 2006 9:15 pm
by kyle1292
yea, jeez u always do that for any question i ask
Posted: Sun Nov 12, 2006 3:44 am
by MrCrowley
it tells you on the how-to though and what to drill bit to use i recall.
and the reason ive done this to 3 of your questions is because they are all topics answered in other posts that take 2min to find on this forum.and you made 4 topics all on pistons on the same day,why didnt you just make one topic with 4 questions?
Quote from that link i gave you:
"The BB exit hole can be drilled at 3/16" (.1875) or similar. This hole is tougher to align as the sides of the block are not parallel. Use shims, guidelines and maybe a square (CD cover) to get this hole exactly right. Both entry and exit holes should form a smooth tangent from the vortex hole with no bumps or dips."