Quite Powerful Mini For It's Size
Posted: Wed Mar 12, 2008 4:09 pm
Well I've actually made alot of spudguns but this is actually the first one I'm posting.
So hence my first spudgun posted on SpudFiles, also my 9th MINI spudgun!
I will simply call it; HV-6mm Mini, which would stand for "High Velocity 6mm" Mini Spudgun (yeah, I kinda lacked some inspiration at the moment)
Appears pretty large in this pic, but it 4.5 inches long and 1 inch wide. Included with a nice ghetto-hand guard/heat shield
The main reasons why I chose for putting this one in the showcase is because;
-It has a 6mm bb barrel (no damn mini spuds)
-It looks more tougher and brutal than most of my mini's
-It simply is so very powerful for it's size!
And seriously this small thing packs quite a punch;
You shoot someone with light clothing on (I'm talking about stuff like jeans, or a shirt or two) and you'll receive a nice bruise of this little bastard and a nasty, NASTY STING!
It also can penetrate several layers of paper, and about 2.5mm (one tenth of an inch) of ordinary, brown cardboard (which is quite respectable for such of a small thing) and the loudness-report of it might not trigger the local police department to swarm your house but is very comfortable to bear though you might not want to keep it next to your ear.
As far as accuracy no hell I'm gonna hit a square piece of paper at like 3+ YARDS, you just simply can't aim with your both your hands on it (it need to have the cap pressed on because it might just blow off) and due the lack of any effective sights.
The secret behind it's power is a rubber ring-thingy at the beginning of the barrel, taken from an airsoft gun. It is designed to hold the bb in place and only lets it pass through at an certain pressure. This way it allows the mini to build up pressure first and making the bb come out more 'explosively'.
The barrel and chamber actually, are nothing special, just a 20 ml pill bottle and an SLIGHTLY sub-caliber 2.5 inch barrel (which sucks, actually).
Normally I would put some on-board fueling system on it but I believe that even the small hole used for the fuel-hose might leak out some pressure (and because the bb is so tight in the beginning of the barrel, some misfires might occure like with some older versions I made)
Tell what you think of it! Thank you.
So hence my first spudgun posted on SpudFiles, also my 9th MINI spudgun!
I will simply call it; HV-6mm Mini, which would stand for "High Velocity 6mm" Mini Spudgun (yeah, I kinda lacked some inspiration at the moment)
Appears pretty large in this pic, but it 4.5 inches long and 1 inch wide. Included with a nice ghetto-hand guard/heat shield
The main reasons why I chose for putting this one in the showcase is because;
-It has a 6mm bb barrel (no damn mini spuds)
-It looks more tougher and brutal than most of my mini's
-It simply is so very powerful for it's size!
And seriously this small thing packs quite a punch;
You shoot someone with light clothing on (I'm talking about stuff like jeans, or a shirt or two) and you'll receive a nice bruise of this little bastard and a nasty, NASTY STING!
It also can penetrate several layers of paper, and about 2.5mm (one tenth of an inch) of ordinary, brown cardboard (which is quite respectable for such of a small thing) and the loudness-report of it might not trigger the local police department to swarm your house but is very comfortable to bear though you might not want to keep it next to your ear.
As far as accuracy no hell I'm gonna hit a square piece of paper at like 3+ YARDS, you just simply can't aim with your both your hands on it (it need to have the cap pressed on because it might just blow off) and due the lack of any effective sights.
The secret behind it's power is a rubber ring-thingy at the beginning of the barrel, taken from an airsoft gun. It is designed to hold the bb in place and only lets it pass through at an certain pressure. This way it allows the mini to build up pressure first and making the bb come out more 'explosively'.
The barrel and chamber actually, are nothing special, just a 20 ml pill bottle and an SLIGHTLY sub-caliber 2.5 inch barrel (which sucks, actually).
Normally I would put some on-board fueling system on it but I believe that even the small hole used for the fuel-hose might leak out some pressure (and because the bb is so tight in the beginning of the barrel, some misfires might occure like with some older versions I made)
Tell what you think of it!
Thank you.
I think it would be pretty cool if you put on a onboard fueling system that would top off the good looks 8) excelent job on the heat gaurd.