Page 1 of 1

Useful Links & Information

Posted: Sat Feb 09, 2008 10:50 pm
by mega_swordman
I, like many other members here, certainly are mad by the prospect of people coming in asking for help or demanding plans without searching. However, I personally believe that people still won't search when instructed to, no matter how many times they are instructed to do so. So as a public service, I will dedicate this thread to assisting spudders in need.

Searching and Spudfiles: General: Cannon Construction: Parts/Supplies

Designing


NetShops



Feel free to add any links in the comments and I will add them to this list.

Posted: Sun Feb 10, 2008 1:27 am
by MrCrowley
sjog wrote: Mrcrowley Ya man Stickey it we all can use for quick reference.
I have.

@Pizlo
BrianMigs wrote:what does a bell reducer look like? and how can some people on here tell if certain parts are dwv, especially if its all ready painted over?
This is a bell reducer:
Image

If a part is DWV, it should only say DWV and maybe Sch 40 on the fitting/pipe.

On fittings the writing is usually raised and can be read once painted over, with pipe, if you have enough layers of paint you probably can't read it.

Don't Worry about identifying DWV pipe and fittings, more pressure rated fittings.

To find out if a fitting is pressure rated, it should have 'NSF-PW' and it may also have Sch 40 (or 80,120 etc) on it. IIRC American fittings don't have a pressure rating on them, but if they have NSF-PW, you're okay, it will be rated.

For pipe, it should have 'NSF-PW Sch 40 (or 80,120, etc) XXXPSI @73F'

XXXPSI, is the pressure rating, it changes depending on the Schedule rating and the diameter of the pipe. The pipe may have a different temperature rating, but the most common say '@73F'.

The pipe may also have 'DWV" written on it, as long as the pipe has a pressure rating, e.g '300PSI @73F' you're okay.

If it doesn't have 'NSF-PW' or pressure rating, chances are it's DWV.

Edit:

This is a PRESSURE RATED PVC 90* bend:
Image

This is a DWV PVC 90* bend, non-pressure rated:
Image

As you can see, the difference is very obvious.

You can get fittings that look DWV, but I doubt you will find them at Home Depot or Lowes, usually they're only found online.
BrianMigs wrote:Is there a thread or something somewhere that will show me what all these different parts look like?
Not really.

I'll list a few pressure rated fittings in pictures:
Image
Image
Image
Image
Image
Image
Image






That's really all the important information about identifying American Pressure rated pipe.

Posted: Wed Sep 30, 2009 11:03 am
by trae08
you should try an copy all of the links to this wiki page.

http://www.spudfiles.com/spud_wiki/inde ... tion_links

edit: also there might be some helpful links in this thread

http://www.spudfiles.com/forums/helpful ... 10338.html

Posted: Tue Feb 15, 2011 12:18 pm
by jrrdw
List updated, thanks again guys. :D

Re: Useful Links & Information

Posted: Wed Feb 05, 2014 6:34 pm
by PCGUY
Should we perhaps update this list & the links in it? Also, maybe turn this into a Wiki page instead so we could simply link to sort of a "starters" Wiki page?

Re: Useful Links & Information

Posted: Sat Feb 08, 2014 2:48 pm
by jrrdw
2 years since last update. Turning it into a wiki page sounds like a great idea. All the links should still be good but I did put at least 1 duplicate that I know of, I'll edit that out after posting this.

I've only played with building wiki pages so not sure how to convert a entire page with starters...

Re: Useful Links & Information

Posted: Tue Feb 11, 2014 2:08 pm
by PCGUY
Unfortunately there isn't much of a way to "copy" a page into the Wiki, short of just the text it's self. Best bet here would be for us to copy the text of the links, make a new Wiki page, then use the Wiki editor to make each into a link going to the proper place. From there we link to the Wiki page!

I can help out with this as well, can help turn it into a simple page to point to for basic things.

Re: Useful Links & Information

Posted: Tue Feb 11, 2014 5:49 pm
by jrrdw
There is all ready this page: http://www.spudfiles.com/spud_wiki/inde ... tion_links

Maybe just add this to it?

Re: Useful Links & Information

Posted: Thu Sep 18, 2014 12:37 pm
by arisemobility
nice threads! very useful links thanks for the info!

Re: Useful Links & Information

Posted: Wed Apr 13, 2016 1:18 am
by jackwilson
Thanks for sharing this useful information..