Strafer fully auto bb gun animation

A place for general potato gun questions and discussions.
User avatar
syco kilaa
Private 4
Private 4
Posts: 66
Joined: Wed Dec 29, 2004 11:01 am
Location: Raleigh, NC
Contact:

Wed Dec 29, 2004 11:28 am

Yea so if anyone out there is wondering how those strafer guns work here is a small animation that I made in a couple minutes of how it works. There usually would be more bbs in the tee that surrounds the whole vortex and stuff but I took them out so that you could see the vortex and how the bbs flow out the barrel:

Image
NEGATIVE
User avatar
theexp
Specialist
Specialist
Posts: 157
Joined: Sun Oct 03, 2004 3:19 pm
Location: Chapel Hill NC
Contact:

Sat Jan 29, 2005 1:02 pm

Nice animation for the old vortex block type of strafer.

But the new cloud kinds are supposed to be cheaper, easier to build and more reliable
User avatar
CS
Moderator
Moderator
Posts: 1837
Joined: Fri Feb 18, 2005 5:32 pm
Location: Southern Utah

Donating Members

Fri Feb 18, 2005 6:37 pm

syco kilaa nice animation but i really dont get it can you give some more explimation or get a different animation
User avatar
syco kilaa
Private 4
Private 4
Posts: 66
Joined: Wed Dec 29, 2004 11:01 am
Location: Raleigh, NC
Contact:

Tue Feb 22, 2005 10:04 pm

well basically the bbs are just all sitting around this little block called hte vortex, what it does is when the air is blown in threw the bottom it makes any bbs that are in the vortex black at the time spin around and sometimes they get shot out of the barrel, the ones that don't get shot out will usually spin around a couple more times and then shoot out. as long as you have enough bbs and enough air pressur this thing will go forever, unless you get a jam, thats if it is not properly build and mor then one bb gets in the barrel opening at a time, thus, they get jammed and you have to stop for a second and shake it, but like the other guy said, the cloud versions are a lot more reliable, cheaer, and easier to make too. look those up if you don't understand this.
NEGATIVE
User avatar
CS
Moderator
Moderator
Posts: 1837
Joined: Fri Feb 18, 2005 5:32 pm
Location: Southern Utah

Donating Members

Wed Feb 23, 2005 11:35 am

thanks for the explimation it makes alot more sense do you know of any other designs for a automatic BB gun because that seems like you would waste alot of BB's and there would be a constient flow of BB's either. what is the Cloud Version and how does it work
User avatar
syco kilaa
Private 4
Private 4
Posts: 66
Joined: Wed Dec 29, 2004 11:01 am
Location: Raleigh, NC
Contact:

Wed Feb 23, 2005 3:13 pm

well basically a cloud BBMG (bb Machine Gun) is just a small resouvor (sp?) half valve full of bb, like imagine a 20 oz. soda bottle on its side ok? well it would be filled with bbs until half full, then a bluwgun or the such would be attached to the bottom part of it (the side of a soda bottle if it is laying down) and a small hole would be drill in the cap of the bottle, in this you would stick well, a barrel. What happens is that when you make a flow of air into the chamber with the bbs the flow comes from under neith them, so naturally they fly around inside of the chamber, the air then exits out of the barrel, and bbs will just get randomly sucked out the barrel, when you look at it firing the bbs inside the bottle look sort of like a cloud, thats why it is called that.

this website a pretty good one to go to to see more of what I'm talking about, the guns at the top of the page are vortes type while the guns below them are cloud ones. BBMG
NEGATIVE
Post Reply