Stand

A place for general potato gun questions and discussions.
User avatar
PCGUY
Owner
Owner
United States of America
Posts: 1434
Joined: Wed Aug 18, 2004 10:54 pm
Location: Illinois
Has thanked: 2 times
Been thanked: 26 times
Contact:

Sat Feb 26, 2005 9:12 pm

<div align="center">STAND

Provided By - Ian2accurate

This is a stand for a cannon, which is able to rotate and move up and down about 120*(degrees sign). The 1" pipe you see running through the cross makes sure the air does not fill the <br>
stand before getting to the projectile. The cross was bored out with a dremel tool, and the pipe was sanded a little to make it go through.

The pipe that 90*'s off on the bottom of the inserted piping leads to 2 tees which are 2 valves for the cannon. It is possible to make a more complex design of this one, which could have supports using 45*'s and such

<img src="http://www.spudfiles.com/official_pics/ ... 6_IMG1.JPG">

<img src="http://www.spudfiles.com/official_pics/ ... 7_IMG2.JPG">

Provided By - Ian2accurate</div>
Yes, I am the guy that owns & operates SpudFiles (along with our extremely helpful moderators).