SpudFiles

NOTE: This dart could probably only be used in 1/4" or 3/8" barrels, and I WOULD NOT recommend shooting it at anyone. However, it is fun for target practice.

Also, I'm not sure if this has already been posted, if it has, my bad. My friends brother makes these for his blowgun.

And now it's time to McGyver it up.

MATERIALS:
<table>
<td>
Cigarette Filter
<img src="http://www1.istockphoto.com/file_thumbv ... "></td><td>
Pencil Eraser
<img src="http://www.newfoundlandphotography.com/ ... "></td><td>
Sewing needle
<img src="http://us.inmagine.com/168nwm/dynamicgr ... td></table>

BEFORE YOU BEGIN: take the pencil eraser ( attached to the metal part ) off of the wooden part of the pencil. Also, take all the paper off the cigarette filter so u only have the fluffly part.

STEP ONE: push the needle through the pencil eraser like so:

pink part | metal part
<----------- needle

STEP TWO: line the inside of the metal part of the eraser w/ any kind of glue, and push the filter into it like so:

<---------FILTER

STEP THREE: fan the filter out so it looks more like a dart.

<---------<<<

Voila, you have a pretty easy and cheap dart.

P.S. - I would've had more pics but my camera is broken so all the pictures on here are from google

EDIT: Someone move this to the How-To section plz, I didnt know there was an unofficial one.

thats some pretty damn expesnive ghetto ammo, its like 5 dollars to get a pack of ciggarettes....

And you have to be 18 where im at to get them. But its ok cause im 18 but i have no money to by ciggarettes

I'm pretty sure that he uses "used" cigarettes (nasty!)

Also you don't really need the pencil eraser.

I haven't done this myself but I know people who like to make ghetto blowguns/ammo.

Just work with used cigarettes they are harmless to handle. (unless you have open wounds on your hands)
Also, this would fit much better in 1/8 inch brass pipe. I have shot both pencil erasers and cigarette filters (separately) through a 1/8 inch brass pipe. The trick is that the metal part of the eraser usually does not fit. That means that you would have to either superglue the parts together or use a 3/8 inch brass pipe. If you can find one.

Just buy bags of filters for roll your own smokes. You dont have to be 18 and you can get like 100 for a coupla bucks

Or you could walk along the side of the street and find thousands.

carlbelcher wrote:Also you don't really need the pencil eraser.

Uhh... Yeah ya do... That's what is giving the dart its mass. The cigarette gives the eraser stability.

Good find Chubster.

Yea, thats a good idea, but it fits in 1/2 inch? i dont think so. more like 1/4 or 3/8. plus, can a mod move this topic to the How-To section.

I tried this ages ago and have found that the darts are too heavy for blowguns. for blow guns I use straightened fish hooks with a paper cone, they are very accurate and fly a long way.

Cigarettes for ammo... Whats next? Used condoms?

well a nother good ammo for these type things my uncle showed us they used to make in school and shoot each other is cut off the ends of ur shoe lace the plastic partwith like 1/4" of the string frey the string stick the needle through the freyed part it will come out the top u can shoot it outta a straw, or even better like we did a bb gun, fit perfect

pimpmann22 wrote:Cigarettes for ammo... Whats next? Used condoms?

That gave me an idea

Nice "find" Chubster

benstern wrote:Or you could walk along the side of the street and find thousands.

And its really fun to take these in your hand ...

Like I said, they are harmless.