Spudinator's Hybrid

[PCGUY]

<div align="center">SPUDINATOR HYBRID

Provided By - Spudinator

Took out the good ol' shopping cart turret from my old dual chamber sprinkler gun and mounted my hybrid on it. it has everything including racks for barrels, bins for ammo, bins for burst discs, a battery for the compressor, switch for the compressor, the entire works. now all I need to do is shorten my spark gap, its not sparking every time. The only downfall to this thing is it weighs in at about equal to a Buick. I can hardly lift the front up where the battery is without straining myself more than I should, but thats what wheels are for.

<img src="http://www.spudfiles.com/official_pics/152.JPG">

The gun in its entirety

<img src="http://www.spudfiles.com/official_pics/252.JPG">

Here you can see most of the operating switches and buttons

<img src="http://www.spudfiles.com/official_pics/352.JPG">

Here is the fuel meter, and as you can see, it is integreated into the mounting of the gun, for a very sleek looking meter

<img src="http://www.spudfiles.com/official_pics/452.JPG">

Here is the ignition button

<img src="http://www.spudfiles.com/official_pics/552.JPG">

The switch for the compressor

<img src="http://www.spudfiles.com/official_pics/652.JPG">

This is something I call the "BurstBin" for holding burst discs in an easy to reach place

<img src="http://www.spudfiles.com/official_pics/752.JPG">

This picture shows a lot fo the guns pressurising and fueling systems, the hose connects from the comopressor and fuel meter to the gun. when fuel is metered, it does not go directly to the gun, but into the hose, when the comperssor is turned on, it purges all propane from the hose into the gun, along with air

<img src="http://www.spudfiles.com/official_pics/852.JPG">

There's the igniter tucked under everything

<img src="http://www.spudfiles.com/official_pics/952.JPG">

Here is the big rats nest of wires and hoses, its even worse at the back of it though.

<img src="http://www.spudfiles.com/official_pics/1052.JPG">

This is a ball valve for releasing any misfires, if any, and with the male hose connector, it also serves as the air inlet for using the gun as a burst disc pnuematic

<img src="http://www.spudfiles.com/official_pics/1152.JPG">

Battery for the compressor

Provided By - Spudinator</div>

[Mac_User]

That is incredible. In fact, this has to be the most inventive hybrid pneumatic cannon i've ever seen! I would just have to suggest that you find a better way to transport it around!

[crazy jap]

can you say towed artillery

[nabu92]

awsome!, did u jack that shopping card from publix? jk.

[taz22]

just a question what are the diferends between hybrids and pneumatics and combustions?? i no the diferends between pneumatics an combustion buth dont know what a hybrid is

[boilingleadbath]

Taz, check the wiki.

[K40T1C]

yes nabu i expect he did since i dont know anybody that has bought a shopping cart so i would assume he found one abandoned so he took it.

[Spudinator]

LOL no I didnt steal the shopping cart from anywhere, I bought it at a garage sale for $3, really lucky find. An hour with an angle grinder and I came out with that.

Thanks for the comments guys, I appreciate them!

[Andrew52]

well id never have to buy one in my bum ridden town theres shopping carts everywhere in the rivers on the side of the road lol but i here new ones are like 100 dollars so best not steal one

[)DEMON(]

when i look at that cannon 'oooooooooo' is the first word that comes to mind