hows my piston lookin?

Cannons powered by pneumatic pressure (compressed gas) using a valve or other release.
Post Reply
User avatar
thespeedycicada
Specialist 4
Specialist 4
Posts: 429
Joined: Sun Aug 12, 2007 1:28 am

Does my new piston look ok? it is a piece of wood dowel with some electrical tape around it and a rubber eraser/duct tape sealing face.
Want to make sure its ok before i put it in my new gun!
Attachments
the piston in its ghettoish glory.
the piston in its ghettoish glory.
P1010192.JPG (22.43 KiB) Viewed 2001 times
The ugly sealing face.
The ugly sealing face.
P1010193.JPG (23.61 KiB) Viewed 2001 times
Perfect fit!
Perfect fit!
P1010195.JPG (23.76 KiB) Viewed 2001 times
current projects: co-axial piston valve.Status DONE!
S.P.E.C.S update mk 1 construction begining in febuary all the maths for it are done plans are drawn up and parts are listed.
NEXT project:auto piston valve.
Top
e1337
Specialist
Specialist
Posts: 110
Joined: Mon May 28, 2007 8:00 pm
Location: Florida

Good, Have you tested it yet? What size pipe does it fit into? I need Specs!

e1337
Top
User avatar
bigbob12345
Staff Sergeant
Staff Sergeant
Posts: 1516
Joined: Sat Dec 01, 2007 9:13 am
Location: Mercer Island,Washington

looks good to me I dont see any thing wrong with it
it looks like it fits into 3/4in pipe
Last edited by bigbob12345 on Sun Jan 13, 2008 9:16 pm, edited 1 time in total.
Top
User avatar
hi
Staff Sergeant 2
Staff Sergeant 2
Posts: 1619
Joined: Thu Feb 01, 2007 9:28 pm

its kinda looks like a dowel wrapped in electrical tape with a piece of rubber glues onto it. not the most attractive piston, as im sure you are aware, but it will work.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote

you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
Top
User avatar
Isomer
Private 4
Private 4
Posts: 81
Joined: Fri Jan 04, 2008 9:35 pm

I would suggest getting a larger size dowel and sanding it down to the perfect size to avoid using electrical tape for a buffer. But if i were you, i'd just do that on the next one, this one is already finished and it looks great.
But you might have problems with the duct tape sealing, maybe try a piece of rubber if it doesn't.
Good Job
Top
User avatar
hi
Staff Sergeant 2
Staff Sergeant 2
Posts: 1619
Joined: Thu Feb 01, 2007 9:28 pm

i agree wit isomer. get a new seal face, cut some off of an inner tube of a bike. the piston is ok as it is though. i dont think duct tape will seal well.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote

you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
Top
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Yeah i'm not sure about the duct tape as a sealing face. Just glue some rubber on it.

Also you should lube it up, apart from that it looks OK.
Top
User avatar
thespeedycicada
Specialist 4
Specialist 4
Posts: 429
Joined: Sun Aug 12, 2007 1:28 am

the duct tape is off now its just the rubber eraser as the sealing face.
current projects: co-axial piston valve.Status DONE!
S.P.E.C.S update mk 1 construction begining in febuary all the maths for it are done plans are drawn up and parts are listed.
NEXT project:auto piston valve.
Top
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “Pneumatic Cannons”