My New Gun
-
pnematicrookie
- Private 3
- Posts: 42
- Joined: Mon Oct 15, 2007 10:17 pm
- Been thanked: 1 time
this is my new gun...all i did was take my last gun apart and just used spare parts i already had....for some reason i can only get it to like 105 psi, i figured it would get way higher than that because of all the chamber i have. any suggestions?
- Attachments
-
- PIC-0233.jpg (15.5 KiB) Viewed 2880 times
-
- PIC-0232.jpg (20.1 KiB) Viewed 2880 times
-
- PIC-0231.jpg (17.2 KiB) Viewed 2880 times
-
- sprinkler valve/blowgun connection
- PIC-0230.jpg (21.62 KiB) Viewed 2880 times
-
- whole gun
- PIC-0229.jpg (17.49 KiB) Viewed 2880 times
what happens when you increase the pressure past 105psi?
if it produces leaks, i suggest that you cover all joints and fittings with epoxy or JB Weld.
i had the same problem with my copper pneumatic and JB Weld fixed 'er right up! now instead of 60psi, i can go 120+
hope i helped
--sthorne
if it produces leaks, i suggest that you cover all joints and fittings with epoxy or JB Weld.
i had the same problem with my copper pneumatic and JB Weld fixed 'er right up! now instead of 60psi, i can go 120+
hope i helped
--sthorne
Last edited by STHORNE on Wed Jan 30, 2008 4:19 pm, edited 2 times in total.
-
pnematicrookie
- Private 3
- Posts: 42
- Joined: Mon Oct 15, 2007 10:17 pm
- Been thanked: 1 time
yeah its probably a leak somewhere, ill try that tho...thanx
i would upgrade to a qev or some kind of piston valve since you have such a large steel chamber.
Coodude26 wrote:
People who laugh really hard at stuff that pisses you off/you getting hurt, who then say "I'm sorry, I can't stop" but you know they easily could.
Mr.C: That's not as easy as you think. It's like me kicking you in the balls and telling you to stop crying.
People who laugh really hard at stuff that pisses you off/you getting hurt, who then say "I'm sorry, I can't stop" but you know they easily could.
Mr.C: That's not as easy as you think. It's like me kicking you in the balls and telling you to stop crying.
yeah I guess you could make a coax with a bit of tinkering, and then you can really out on the pressure.
-
daberno123
- Corporal
- Posts: 594
- Joined: Mon Nov 19, 2007 5:56 pm
- Location: Ohio
Right now the limiting factor on it's pressure is the sprinkler valve. I second Maniac's idea of a QEV or piston since they can be used at higher pressure than a sprinkler
Agreed. You are holding the potential of this launcher back with the sprinkler. Replace it with a QEV (which will probably easier than building a piston for this setup) and see what it can really do.
-
pnematicrookie
- Private 3
- Posts: 42
- Joined: Mon Oct 15, 2007 10:17 pm
- Been thanked: 1 time
where the heck do i get a QEV from?! im new to this lol
-
pnematicrookie
- Private 3
- Posts: 42
- Joined: Mon Oct 15, 2007 10:17 pm
- Been thanked: 1 time
thanx, but no damage pics yet...but this isnt my first gun by the way...i believe its my...fourth, im just experimenting to see what i come up with...so i'll try this QEV thing out lol
-
potatoflinger
- Sergeant 2
- Posts: 1136
- Joined: Thu Nov 02, 2006 3:26 pm
- Location: Maryland
Another place where you can get a QEV is here:
http://www.fastenal.com/web/products.ex ... m_search=1
They are pretty reasonable as long as you don't get the 1" valve.
http://www.fastenal.com/web/products.ex ... m_search=1
They are pretty reasonable as long as you don't get the 1" valve.
It's hard to soar with eagles when you're working with turkeys.
-
pnematicrookie
- Private 3
- Posts: 42
- Joined: Mon Oct 15, 2007 10:17 pm
- Been thanked: 1 time
thanx, yeah that 1" valve is ridiculous, i would just rather buy a real gun lol
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute