I have my next project in planning and I need to pressurize 4" pipe. I can get 4" sch. 40 pipe. It says DWV 220 PSI, I assume it would be good for 120 psi but wanted to get your thoughts.
It wont be used for a spud gun directly but rather used as a large bore 1 foot stroke pneumatic cylinder.
DWV 4" sch40 rated at 220 psi?
- Jeeperforlife
- Specialist
- Posts: 108
- Joined: Tue Jan 15, 2008 4:51 pm
It may, I did not look for it. I am still learning PVC. Luckily I have access to all the books on it I could want.Carlman wrote:does it have NSF-PW on it?
- Jeeperforlife
- Specialist
- Posts: 108
- Joined: Tue Jan 15, 2008 4:51 pm
Thanks, Now to see if it holds up to the external forces I need it to.
- MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
- Jeeperforlife
- Specialist
- Posts: 108
- Joined: Tue Jan 15, 2008 4:51 pm
ThanksMrCrowley wrote:<A HREF="http://www.spudfiles.com/spud_wiki/inde ... C">This</a> should solve all your problems
Marcus