Sketchup Model Library

A place for general potato gun questions and discussions.
User avatar
Moonbogg
Staff Sergeant 3
Staff Sergeant 3
United States of America
Posts: 1731
Joined: Mon Oct 13, 2008 10:20 pm
Location: SoCal
Has thanked: 153 times
Been thanked: 98 times

Thu Apr 30, 2009 4:13 pm

dewey-1 wrote:Updated for the addition of Brass tees and crosses.

Comment about the self extracting files:
It is a bit inconvenient to use a free file host server but I guess, what do you expect for free. At least the files can be up to 300mb.

The only reason I did all the work of creating sketchup downloads is because sketchup is free and most members complain about the cost of something.

I guess for sketchup it is easier to use 3D-Warehouse as the file server.
Although it has limitations of 10mb files.

I had to split that launcher into 3 separate sections to upload.

Apparently there are no requests or interest.
Either that or sketchup is to difficult for some to use.
I thought the self extracting files would only be good for a quick review of the model here on the site, and then if they liked the model or wanted to use it, then they go to the sketchup library to download it and create their design.
User avatar
dewey-1
Sergeant 3
Sergeant 3
Posts: 1298
Joined: Wed Mar 28, 2007 10:24 am
Location: NE Wisconsin USA

Thu Apr 30, 2009 4:16 pm

Thanks David;

I saw that you used the QEV and trigger!

I have to order a pop off valve from McMaster so I can create a drawing.
User avatar
LeMaudit
Corporal 2
Corporal 2
Posts: 665
Joined: Thu Apr 16, 2009 2:48 pm

Donating Members

Fri May 01, 2009 10:11 am

Wonderful work you've done there! Amazing 3D models!!
User avatar
dewey-1
Sergeant 3
Sergeant 3
Posts: 1298
Joined: Wed Mar 28, 2007 10:24 am
Location: NE Wisconsin USA

Mon May 04, 2009 6:01 am

LeMaudit wrote:Wonderful work you've done there! Amazing 3D models!!
Thanks for the compliment!

I have recently started a Sch 80 PVC fittings drawing.

Should be done within a week.
User avatar
dewey-1
Sergeant 3
Sergeant 3
Posts: 1298
Joined: Wed Mar 28, 2007 10:24 am
Location: NE Wisconsin USA

Fri May 08, 2009 4:28 pm

Well I just completed uploading PVC SCH 80 fittings to the library.

The sizes are 1.0, 1.25, 2.0, 2.5, 3.0 and 4.0 inch. All are Spears.

I have noticed that there are all kinds of PVC fittings available in the 3D Warehouse site.

Any way, the library is getting larger. So check it out!

Check here: Pneumatic Component Library
User avatar
POLAND_SPUD
Captain
Captain
Posts: 5402
Joined: Sat Oct 13, 2007 4:43 pm
Been thanked: 1 time

Fri May 08, 2009 4:47 pm

@dewey-1
I don't use PVC..... but again kudozz for your efforts
Children are the future

unless we stop them now
User avatar
dewey-1
Sergeant 3
Sergeant 3
Posts: 1298
Joined: Wed Mar 28, 2007 10:24 am
Location: NE Wisconsin USA

Thu May 28, 2009 3:52 pm

Here is a preview for next component.

Need to finish mounts and remote switch yet.


Image
User avatar
USGF
Specialist
Specialist
Posts: 173
Joined: Sun Mar 08, 2009 5:39 am
Contact:

Thu May 28, 2009 4:08 pm

dewey-1 wrote: snip

Need to finish mounts and remote switch yet.
Dewey, Are you machining or otherwise making these items for sale?
USGF
User avatar
dewey-1
Sergeant 3
Sergeant 3
Posts: 1298
Joined: Wed Mar 28, 2007 10:24 am
Location: NE Wisconsin USA

Thu May 28, 2009 4:26 pm

USGF wrote:
dewey-1 wrote: snip

Need to finish mounts and remote switch yet.
Dewey, Are you machining or otherwise making these items for sale?
USGF
No, I am basically creating 3D drawings for spudgun use.

I am a retired Enginneer and enjoy creating 3D models for our hobby.

I use and old version of autcad and then convert to sketchup for those who need a free modeling program.

If you see any 3D models that interest you, just let me know!

Look here for current drawings;

Check here: Pneumatic Component Library
User avatar
Hubb
First Sergeant 2
First Sergeant 2
Posts: 2390
Joined: Mon May 28, 2007 8:39 am
Location: South Georgia
Contact:

Thu May 28, 2009 4:30 pm

I just jumped onto the sketchup bandwagon. Now, I'll wait for the Sch40 to come about. Until then, nice work.
User avatar
USGF
Specialist
Specialist
Posts: 173
Joined: Sun Mar 08, 2009 5:39 am
Contact:

Thu May 28, 2009 4:44 pm

dewey-1 wrote:
USGF wrote:
dewey-1 wrote: snip

Need to finish mounts and remote switch yet.
Dewey, Are you machining or otherwise making these items for sale?
USGF
No, I am basically creating 3D drawings for spudgun use.

I am a retired Enginneer and enjoy creating 3D models for our hobby.

I use and old version of autcad and then convert to sketchup for those who need a free modeling program.

If you see any 3D models that interest you, just let me know!

Look here for current drawings;

Check here: Pneumatic Component Library
Dewey, I am over here wondering how to convert back to ACAD. LOL We machine / model in ACAD. Is there a location you can upload your native dwg files? I have a FTP server, actually one of those NAS drives. I dunno how to use it without my IT guy....

USGF
User avatar
dewey-1
Sergeant 3
Sergeant 3
Posts: 1298
Joined: Wed Mar 28, 2007 10:24 am
Location: NE Wisconsin USA

Thu May 28, 2009 4:46 pm

hubb017 wrote:I just jumped onto the sketchup bandwagon. Now, I'll wait for the Sch40 to come about. Until then, nice work.
There are some sch40 models out there;

http://sketchup.google.com/3dwarehouse/ ... pvc&styp=m

Or are you referring to my sch40 models?
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Thu May 28, 2009 4:51 pm

If you don't have Sketchup the Sketchup files can now be used in Blender. A tutorial is here. :D

http://www.blendernation.com/2006/05/11 ... o-blender/

Blender is open source and free. :D There is no pro version with a limited function free version.
http://www.blender.org/

The free version can only output in one Google format and stated here;
http://en.wikipedia.org/wiki/SketchUp
While the free version of Google Sketchup can only export to Google Earth's .kmz 3D file format, the Pro version extends exporting support to include the .3ds, .dae, .dwg, .dxf, .fbx, .obj, .xsi, and .wrl file formats.
Blender has a good internal rendering engine.

Too bad I haven't learned to use it yet. :(

The Blender team has released a couple movies made with open source tools.
[youtube][/youtube]
[youtube][/youtube]

The second one is weird but fun.
Attachments
Sample Blender rendering
Sample Blender rendering
Last edited by Technician1002 on Thu May 28, 2009 5:28 pm, edited 3 times in total.
User avatar
dewey-1
Sergeant 3
Sergeant 3
Posts: 1298
Joined: Wed Mar 28, 2007 10:24 am
Location: NE Wisconsin USA

Thu May 28, 2009 5:00 pm

USGF wrote: Dewey, I am over here wondering how to convert back to ACAD. LOL We machine / model in ACAD. Is there a location you can upload your native dwg files? I have a FTP server, actually one of those NAS drives. I dunno how to use it without my IT guy....

USGF
I can send dwg or sat3 files to you directly via e-mail.

These files will not lose any detail which may occur if double conversion.

I had one of my files take 6 hours to convert to sketchup.

Just pm me and we can discuss.
Last edited by dewey-1 on Fri May 29, 2009 6:55 am, edited 1 time in total.
User avatar
dewey-1
Sergeant 3
Sergeant 3
Posts: 1298
Joined: Wed Mar 28, 2007 10:24 am
Location: NE Wisconsin USA

Thu May 28, 2009 5:15 pm

Technician1002 wrote:If you don't have Sketchup the Sketchup files can now be used in Blender.
Too bad I haven't learned to use it yet. :(
I have the Blender program as well as PoseRay and POV-Ray.

They can do rendering but you still need the 3D cad to create a launcher from the components available.

When you learn you can help me! :D
Post Reply