Piston Valves Explained Visually

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
Spooky
Private
Private
Posts: 13
Joined: Tue Aug 11, 2009 4:36 pm

Sun Aug 23, 2009 6:30 am

I'm working on a coaxial at the moment, just successfully cast my epoxy piston.

The problem I'm having is that my copper barrel is sagging inside inside the chamber. This will obviously cause sealing problems as it wont line up correctly with the piston.


Thought about sleeving the barrel with something inside the chamber to keep it rigid but this will decrease my chamber volume too much. I also thought about a drop of epoxy between the outside of the barrel and the inside of the chamber at the piston end, but I'm worried about how this will affect airflow during firing.

Do I have any other options?
User avatar
FORE!!!!
Specialist 2
Specialist 2
Posts: 277
Joined: Mon Jul 06, 2009 8:14 am

Sun Aug 23, 2009 7:15 am

Spooky wrote:I'm working on a coaxial at the moment, just successfully cast my epoxy piston.

The problem I'm having is that my copper barrel is sagging inside inside the chamber. This will obviously cause sealing problems as it wont line up correctly with the piston.


Thought about sleeving the barrel with something inside the chamber to keep it rigid but this will decrease my chamber volume too much. I also thought about a drop of epoxy between the outside of the barrel and the inside of the chamber at the piston end, but I'm worried about how this will affect airflow during firing.

Do I have any other options?

something like this maybe== :wink: click to enlarge..
Attachments
barrel spacer support
barrel spacer support
Last edited by FORE!!!! on Sun Aug 23, 2009 7:35 pm, edited 1 time in total.
al-xg wrote:
I've used various things like cutting oil, silicone lubricant, even butter

jsr wrote:
This collection of containers on your bedside table must look very intimidating to any visiting young ladies

...but hey, lube shows you care;)
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Sun Aug 23, 2009 2:17 pm

Spooky wrote:I'm working on a coaxial at the moment, just successfully cast my epoxy piston.

The problem I'm having is that my copper barrel is sagging inside inside the chamber. This will obviously cause sealing problems as it wont line up correctly with the piston.


Thought about sleeving the barrel with something inside the chamber to keep it rigid but this will decrease my chamber volume too much. I also thought about a drop of epoxy between the outside of the barrel and the inside of the chamber at the piston end, but I'm worried about how this will affect airflow during firing.

Do I have any other options?
Most people use some sort of barrel support with either holes in it or only making the support take up a small cross-sectional area to support the barrel. I cut a cork in half, trimmed it a bit and glued it at the end of the barrel inside the chamber.

Some people make a circle from some rigid material and then cut out 80% of the middle, leaving only necessary supports, so air can still flow past it.
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Tue Aug 25, 2009 4:05 am

MrCrowley wrote:
Spooky wrote:I'm working on a coaxial at the moment, just successfully cast my epoxy piston.

The problem I'm having is that my copper barrel is sagging inside inside the chamber. This will obviously cause sealing problems as it wont line up correctly with the piston.


Thought about sleeving the barrel with something inside the chamber to keep it rigid but this will decrease my chamber volume too much. I also thought about a drop of epoxy between the outside of the barrel and the inside of the chamber at the piston end, but I'm worried about how this will affect airflow during firing.

Do I have any other options?
Most people use some sort of barrel support with either holes in it or only making the support take up a small cross-sectional area to support the barrel. I cut a cork in half, trimmed it a bit and glued it at the end of the barrel inside the chamber.

Some people make a circle from some rigid material and then cut out 80% of the middle, leaving only necessary supports, so air can still flow past it.
Because air expands, the highest velocity in the chamber is near the valve. I provide barrel supports in coaxials about 6 inches from the valve. It prevents sagging and is mostly out of the airflow path. There is no need for a support right at the area of the valve.
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Tue Aug 25, 2009 4:10 am

Good advice, never thought of that though it makes perfect sense. :)
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Tue Aug 25, 2009 4:54 am

MrCrowley wrote:Good advice, never thought of that though it makes perfect sense. :)
I guess a picture helps. Here is a view into the breech of the Mouse Musket. The barrel supports are back about 6 inches so they are not visiable near the breech.

Image
User avatar
pipeboyswe
Private 3
Private 3
Posts: 40
Joined: Tue Sep 01, 2009 8:52 am
Location: Sweden

Thu Sep 03, 2009 8:41 am

thanks now i understand how a coax works :D what is the best material for the piston body?
User avatar
Willdebeers
Specialist 2
Specialist 2
Posts: 214
Joined: Tue Feb 03, 2009 1:18 pm

Thu Sep 03, 2009 9:16 am

Whatever you can get hold of. They range from baked bean cans to solid PVC.
Image
User avatar
qwerty
Corporal 2
Corporal 2
Posts: 678
Joined: Sun Apr 12, 2009 2:16 am

Thu Sep 03, 2009 10:25 am

It depends what you have access to if you have a machine shop you could make a solid nylon piston or if you dont have any machinery you could make one out of hot glue or epoxy. I made mine out of some random toy car wheel so you can use almost anything cylindrical shape.
I visit occasionally to make unrelated posts.
User avatar
Brian the brain
Moderator
Moderator
Netherlands
Posts: 3496
Joined: Mon Dec 05, 2005 2:06 am
Location: Holland
Been thanked: 3 times

Thu Sep 03, 2009 10:36 am

A bolt and washers works well..
Gun Freak wrote:
Oh my friggin god stop being so awesome, that thing is pure kick ass. Most innovative and creative pneumatic that the files have ever come by!

Can't ask for a better compliment!!
User avatar
toogers
Private 2
Private 2
Posts: 35
Joined: Sat Oct 24, 2009 2:07 pm
Location: hot-glue catacombs

Sat Oct 24, 2009 5:38 pm

I'm wondering, instead of the air compressor pressure pushing the piston forward, can i put a spring behind the piston, because i don't have access to an air compressor. my idea is that opening the pilot would create vacuum pulling the piston back letting the pressure in the chamber go through the barrel.
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Sat Oct 24, 2009 5:42 pm

toogers wrote:I'm wondering, instead of the air compressor pressure pushing the piston forward, can i put a spring behind the piston, because i don't have access to an air compressor. my idea is that opening the pilot would create vacuum pulling the piston back letting the pressure in the chamber go through the barrel.
Yes that should work, and by the way, the piston doesn't open because of a vacuum. I suggest you look at the drawings again. It opens because when you remove the force behind the piston, the force in front of the piston pushes it back.
bobsaget
Private
Private
Posts: 3
Joined: Wed Dec 16, 2009 11:13 pm

Sat Dec 19, 2009 12:16 pm

If i am molding a piston out of the connector that the piston will slide in, i will need to make a slight equalization hole because the piston is the same exact size as the gun itself, correct? And how large should my equalization hole be if the piston is 3/4 in wide or about two CM. I am planning on making a very small hole and making it larger untill the piston moves back. The piston should move back if i have a very small hole right, something around 2 mm?
mrsteel
Recruit
Recruit
Posts: 1
Joined: Sat Jan 02, 2010 5:49 pm

Sun Jan 03, 2010 5:58 pm

im building a piston valve airgun and i want to know if the diameter of the exhaust port should be bigger or smaller than that of the barrel, whichone woold give more power to the barrel?
    User avatar
    c11man
    Corporal 3
    Corporal 3
    Posts: 783
    Joined: Fri Feb 06, 2009 4:37 pm
    Location: Wisconsin, USA

    Sun Jan 03, 2010 6:03 pm

    i assume you mean the porting size by exhaust port and it should be the same or larger than the barrel for more power. in no way do you need to make it larger but i generly gives more airflow resulting in more projectile velocity. also you will be supprised by the power of a piston valve

    edit: ok now i know what you were talking about
    Last edited by c11man on Sun Jan 03, 2010 6:30 pm, edited 1 time in total.
    Post Reply