New here

Miniature guns are novelty custom, unique, and sometime downright crude! Common construction materials often include pill bottles or pens. Show us your work!
User avatar
Kilash
Private 4
Private 4
Posts: 70
Joined: Thu Jan 21, 2010 12:20 am

Thu Jan 21, 2010 12:47 am

Great site and forum you guys have here, wish I had known about it sooner. I'm a novice on the subject, but I hope to learn more from everyone here. As a intro, here's pics of the first mini I built:


Image

Image

As you see, I'm a minimalist with my builds, I use whatever materials are lying around. I made this one late one night in my room, and finished it in about 3 hours. Not great (especially compare to the amazing builds I seen so far here), but it works. The barrel, if you can believe it, is made from rolled printer paper.

I made my first spud gun when I was 15, an ABS built with an 18 inch x 3 inch chamber. It blew up on me on the second day when I just so happen to spray in the ultra-optimal amount of Right Guard into the chamber. Fortunately, since it was made from ABS piping, it didn't shatter into flying shrapnel like as I heard PVC will do. Not so luckily, I was holding the gun, and I got burned by the hot gases leaking from the giant crack in the chamber. I stick to building minis now for that reason, much safer and cheaper, but still lots of fun :P
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Thu Jan 21, 2010 1:54 am

Good use of whatever material is to hand is one of the marks of a good spudder, maybe you should apply for a ghetto award;) welcome to spudfiles
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Moonbogg
Staff Sergeant 3
Staff Sergeant 3
United States of America
Posts: 1731
Joined: Mon Oct 13, 2008 10:20 pm
Location: SoCal
Has thanked: 153 times
Been thanked: 98 times

Thu Jan 21, 2010 2:05 am

Welcome. Sorry to hear about your bad experience. Don't be afraid to make a full sized cannon. Countless people here have made many without failure. If done right, they are safe to use.
User avatar
tghhs
Specialist
Specialist
Posts: 176
Joined: Wed Dec 31, 2008 11:01 pm

Thu Jan 21, 2010 2:51 am

Hey man. Yeah you sure are rockin the ghetto atm :P .

I wouldn't mind seeing a vid if possible. Do you have to change barrel because it burns?

Yeh bummer about the failure, mabe a pneumatic? then you can control exzactly how much stress you place on the parts instead of hoping that you don't over do it when the magic button is pressed
User avatar
Kilash
Private 4
Private 4
Posts: 70
Joined: Thu Jan 21, 2010 12:20 am

Thu Jan 21, 2010 10:21 am

jackssmirkingrevenge: Cool! I will tryout for the award :D
tghhs wrote:Hey man. Yeah you sure are rockin the ghetto atm :P .

I wouldn't mind seeing a vid if possible. Do you have to change barrel because it burns?
Nope, it doesn't burn at all, at least not in my mini guns. I find that paper is a remarkably strong and resilient material for a barrel. I'm guessing that the temperature of the hot gases don't linger around long enough to burn the paper. A plus side is that I can roll a barrel into just about any caliber or length, you just roll more paper onto it if you need a stronger barrel.

The tricky thing is that you can't have gases blowing through the rolled layers, that tends to destroy the barrel outright as gases shoot between the layers. In the above, you'll see a slight burnt ring of masking tape I used to seal the circumference of the barrel to prevent this. There's also a strip of tape holding down the edge of the paper roll inside the barrel for the exact same reason.

As for a video, I don't think that's possible, seeing how I don't know where it is right now :P.
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 7 times

Tue Jan 26, 2010 10:06 pm

i used to be just like you, using stuff around the house. i made a gun just like that with butane fuel and another mini using ax for propellant. but i recently built a big pneumatic and plan on building a new piston valve gun and a mini pneumatic. you should deffinately step it up. spudding is real fun. :D
Post Reply