16.4 Ounce Containers for a Combustion Cannon

Boom! The classic potato gun harnesses the combustion of flammable vapor. Show us your combustion spud gun and discuss fuels, ratios, safety, ignition systems, tools, and more.
User avatar
kjjohn
Specialist 2
Specialist 2
Posts: 270
Joined: Sat Jul 11, 2009 3:54 pm
Contact:

Mon Jul 19, 2010 1:57 pm

The fan survives the combustion because it is very quick. Although the combustion produces a few thousand degrees of heat, it only does so for a small fraction of a second, so the fan can survive it. The only time a fan won't survive is in high-power hybrids.

I would not run your ignitor/chamber fan off of a car battery. First of all, you can achieve the same thing in a much more portable package with something like an RC car rechargeable NiMH or Li-poly battery, and if that's too expensive, you can always go with a BBQ igniter.

Secondly, yes, a car battery could drive an ignition coil circuit well, but I wouldn't risk it with a little CPU fan. I'm no electronics expert, but I'd wager that the amperage a car battery puts out would be enough to toast your fan after a few minutes.
lbfergus
Private
Private
Posts: 8
Joined: Mon Oct 02, 2006 3:01 pm

Mon Jul 19, 2010 3:22 pm

Can the tank be inverted or does it have to be stored 'right side up'.
User avatar
ramses
Staff Sergeant 2
Staff Sergeant 2
United States of America
Posts: 1679
Joined: Thu May 29, 2008 6:50 pm

Mon Jul 19, 2010 3:24 pm

Do not use the tank upside-down; the liquid propane will come out, freeze up your regulator, and cause problems.

I'm not sure about storage requirements, but I store mine right-side-up.
POLAND_SPUD wrote:even if there was no link I'd know it's a bot because of female name :D
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Mon Jul 19, 2010 3:35 pm

Storing them right side up is correct. That way the relief valve can vent vapor and lower the pressure to prevent an explosion if overheated. Inverted, it would vent liquid which would not appreciably lower the pressure and cause a fire hazard.
SpudBlaster15
First Sergeant 3
First Sergeant 3
Seychelles
Posts: 2400
Joined: Wed Oct 18, 2006 11:12 pm
Has thanked: 2 times
Been thanked: 10 times

Mon Jul 19, 2010 3:43 pm

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Thu Jul 15, 2021 1:15 am, edited 1 time in total.
lbfergus
Private
Private
Posts: 8
Joined: Mon Oct 02, 2006 3:01 pm

Mon Jul 19, 2010 3:47 pm

Thanks for all of the help everyone!

My last (hopefully) question for this build, can I build a stand for this thing out of PVC? Or is the recoil too much for it to hold?

I plan on an overall length of about 8-10 feet.
User avatar
kjjohn
Specialist 2
Specialist 2
Posts: 270
Joined: Sat Jul 11, 2009 3:54 pm
Contact:

Mon Jul 19, 2010 4:34 pm

8-10 feet? For the barrel, or just the chamber? Because if you mean the chamber, that's going to be one powerful combustion cannon! Usually these things don't have a whole lot of recoil. At least, not as much as you would expect. You could build a stand out of PVC, but make sure it has a large enough base, and if the recoil does prove to be too powerful, just put some weights on it, or use metal pipe towards the bottom of the stand.
User avatar
Jeeperforlife
Specialist
Specialist
Posts: 108
Joined: Tue Jan 15, 2008 4:51 pm

Mon Jul 19, 2010 5:43 pm

lbfergus wrote:Thanks for all of the help everyone!

My last (hopefully) question for this build, can I build a stand for this thing out of PVC? Or is the recoil too much for it to hold?

I plan on an overall length of about 8-10 feet.
It can be done. here is a picture of my coaxil on a PVC stand. It is more than strong enough and you could easily add 1" wooden rods to increase the sturdiness quite a bit.

Image

The gun is 4" PVC chamber 5' long and a 5' 2" barrel. Shot at about 135 PSI on average. It does kick pretty good but the stands flexibility helps to absorb it. With me standing behind it I absorb some recoil too.
Life is tough, it's even tougher when you're stupid. -John Wayne

Marcus
Post Reply