Upgrades Anyone?

[Jarim]

thanks a bunch... neone knoe how to make a bipod...

[MrCrowley]

i dont personally but search the forums for pneumatic rifles,most of them will have a bi-pod or a stock.if that dont work just google it or search it here

[Jarim]

thanks a bunch!... does neone know of anything to coat your barrel with if you shooting spuds, to make them maintain pressure hold yet lower the friction if ya know what i mean?... as in not let air by but slide better...

[frankrede]

Look at the wiki and search for combustions and it ahs like al the upgrades that are possible and gives you enough information to put them together... and frankrede jw but why would you put a burst disk on a regular combustion? I thought you just put those on hybrids so that they would hold pressure...?

I use it so I can do dry fires without using any ammo. Just for show.

[frankrede]

ok i have a barrel knife and use burst disks...by the way what is a flint shroud and dont you need electronic ignition to have a spark strip...? just wondering?

It is a plastic covering over the back of a latern lighter you can make that "stops your spray from hitting the flint. It doesnt surround it but it covers the back half of the latern lighter.

[frankrede]

thanks a bunch!... does neone know of anything to coat your barrel with if you shooting spuds, to make them maintain pressure hold yet lower the friction if ya know what i mean?... as in not let air by but slide better...

Pam.lol.Aerosal lubricant.(lithium grease)

[Jarim]

ok i have a barrel knife and use burst disks...by the way what is a flint shroud and dont you need electronic ignition to have a spark strip...? just wondering?

It is a plastic covering over the back of a latern lighter you can make that "stops your spray from hitting the flint. It doesnt surround it but it covers the back half of the latern lighter.

ooooo good idea.. thanks where would you get those or do you have to make it... and if so how?

[Jarim]

i was thinking pam....lol

[WOW!!]

Dont put anything in your barrel. You want a good seal and the more friction you have(not to much tho)The more powerfull shot you have.

[Jarim]

oh ok... well then i wont use pam lol

[frankrede]

Dont put anything in your barrel. You want a good seal and the more friction you have(not to much tho)The more powerfull shot you have.

Hmm,You want a good seal with a moderate amount of friction to keep the seal. You want your ammo to "glide" in your barrel. Not have to hammer it down.

ok i have a barrel knife and use burst disks...by the way what is a flint shroud and dont you need electronic ignition to have a spark strip...? just wondering?

It is a plastic covering over the back of a latern lighter you can make that "stops your spray from hitting the flint. It doesnt surround it but it covers the back half of the latern lighter.

ooooo good idea.. thanks where would you get those or do you have to make it... and if so how?

I used aluminum foil wrapped around an O- ring.

Note from Drac: Please don't double post, use the edit button. It's there for a reason.