Converting a Propane Cylinder

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
warhead052
Staff Sergeant 3
Staff Sergeant 3
Posts: 1769
Joined: Mon Mar 21, 2011 5:41 pm

Wed Aug 10, 2011 2:15 pm

Oh, another way to do it. Vise and a pipe wrench plus alot of time and effort. I think its pretty self explanatory, just remove the top, and all the gas comes out. Not the safest way to do it, but thats why they invented steel pipes right? Extend the grip, gives more leverage and keeps you away from the gas.
User avatar
velocity3x
Corporal 4
Corporal 4
Posts: 828
Joined: Fri Jun 05, 2009 3:09 pm
Location: Yuma, Arizona
Contact:

Wed Aug 10, 2011 2:38 pm

mattyzip77 wrote:go buy the valve, do what you need to do, and then just return it, and say it doesnt work!!! always works for me, just save your receipt!!
Well, at least you're honest about your dishonesty! :lol: :lol:
User avatar
nathanhd123
Private 4
Private 4
Posts: 95
Joined: Sat Jan 15, 2011 12:36 pm
Location: United Kingdom

Wed Aug 10, 2011 3:00 pm

Ok so I have finally managed to drill through the valve - just decided to go for it! Anyway I have 2 questions.

1. From drilling it part of the valve has fallen into the cylinder and you can hear it rolling around. Will it be alright to just leave it in there?

2. If one of these fails does it shatter, split, crack or what?
<a href="http://www.danasoft.com"><img src="http://www.danasoft.com/vipersig.jpg" border="0"></a><p><div>Sign by Danasoft - <a href="http://www.danasoft.com">Get Your Sign</a></p></div>
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 7 times

Wed Aug 10, 2011 3:07 pm

1. Try to get it out... That's gonna be really annoying lol.
2. I think it would split. But it would be loud.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
User avatar
nathanhd123
Private 4
Private 4
Posts: 95
Joined: Sat Jan 15, 2011 12:36 pm
Location: United Kingdom

Wed Aug 10, 2011 3:08 pm

Despite being annoying is there any risk having it in there?
<a href="http://www.danasoft.com"><img src="http://www.danasoft.com/vipersig.jpg" border="0"></a><p><div>Sign by Danasoft - <a href="http://www.danasoft.com">Get Your Sign</a></p></div>
User avatar
Gun Freak
Lieutenant 5
Lieutenant 5
Posts: 4971
Joined: Mon Jan 25, 2010 4:38 pm
Location: Florida
Been thanked: 7 times

Wed Aug 10, 2011 3:15 pm

Not that I could think of...
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna"M16 BBMGPengunHammer Valve Airsoft SniperHigh Pressure .22 Coax
Holy Shat!
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Wed Aug 10, 2011 3:47 pm

The main valve core and the pop off safety valve can both be removed with a tire valve tool. The main valve has a plastic ring with an o ring under it to seal against leaks when an appliance is attached. The plastic ring and o ring are just press fit inside. Unscrewing the valve core will pop both of them out for you. Under the valve core is a small restriction hole to limit the max flow from the tank to limit the size of the leak if something goes wrong. With both valve cores removed, the remaining gas can be diluted with air by glowing it out with a blowgun, or simply displace it with water as mentioned above. With both cores out, you can drill the main valve passage much larger. I hope this helps.

If you drop it, the steel tank will dent. Both my large QDV and the small one both have been dropped and have dents. Not everyone firing them keep a good grip for the recoil.
Post Reply