Looking For Advice From the Hybrid Gods

Harness the power of precision mixtures of pressurized flammable vapor. Safety first! These are advanced potato guns - not for the beginner.
CannonCreations
Private 3
Private 3
Posts: 57
Joined: Fri Sep 02, 2011 9:30 am

Sat Nov 30, 2013 2:07 am

Hello, I will be building a piston valve hybrid cannon this December when I get some time off from college, and I am looking for some advice. I have no problem with anything but the ignition. I have seen many other guns use stun guns to ignite the fuel mixture, but unfortunately my state doesn't allow them. I have been looking for other ways to create a spark with enough voltage to ignite the fuel to air mixture and I am unsure how high that will need to be. I ran across this http://ultimatespudgun.com/30kv-igniter-p-219.html, but I don't know if 30,000 volts is enough for a reliable ignition with a 6x or 7x mixture. I am proficient with circuits and can solder pretty well so I am not against building an ignition circuit myself, but I haven't had the opportunity to work with voltages above 240V so if I can avoid it I will. Any help or advice would be greatly appreciated, thanks.
User avatar
PeteS
Specialist
Specialist
Posts: 179
Joined: Wed Sep 11, 2013 5:53 pm
Location: Maryland
Contact:

Sat Nov 30, 2013 7:51 am

The one that you linked to has been working flawlessly for me, but I have not gone beyond 5x.
[center]My wife upon seeing my latest hybrid and hearing an explanation of it:
"That really isn't a potato cannon anymore, is it?"
[/center]
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Sat Nov 30, 2013 9:17 am

I have used ordinary piezo ignitors from disposable cigarette lighters to ignite mixtures up to 16x reliably. The key is to make the spark gap very small (0.5mm or less).
hectmarr wrote:You have to make many weapons, because this field is long and short life
CannonCreations
Private 3
Private 3
Posts: 57
Joined: Fri Sep 02, 2011 9:30 am

Sat Nov 30, 2013 1:21 pm

Really? a piezo? what kind of voltage does that put out? and thanks for the quick feedback. Are you using a spark plug for your spark gap, or did you find another way that is better?
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Sat Nov 30, 2013 2:13 pm

This is one of my first successful hybrids, take a patient look through this thread: http://www.spudfiles.com/hybrid-cannons/topic21655.html

Image

You can use a commercial spark plug but they typically have a 1-2mm gap, you might have to adjust it slightly for higher mixes.
hectmarr wrote:You have to make many weapons, because this field is long and short life
CannonCreations
Private 3
Private 3
Posts: 57
Joined: Fri Sep 02, 2011 9:30 am

Sat Nov 30, 2013 10:03 pm

Thank you for your advice, I really appreciate your input. I am also a big fan of all the work you have done
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Sun Dec 01, 2013 6:40 am

CannonCreations wrote:Thank you for your advice, I really appreciate your input.
That's what the forum is for :) be careful though, it's not all wins: http://www.spudfiles.com/hybrid-cannons/topic21645.html
hectmarr wrote:You have to make many weapons, because this field is long and short life
SpudBlaster15
First Sergeant 3
First Sergeant 3
Seychelles
Posts: 2400
Joined: Wed Oct 18, 2006 11:12 pm
Has thanked: 2 times
Been thanked: 10 times

Sun Dec 01, 2013 9:53 am

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 8:11 pm, edited 1 time in total.
User avatar
advancedspuds
Private
Private
Posts: 15
Joined: Thu Dec 05, 2013 6:01 am

Thu Dec 05, 2013 6:42 am

To be honest, once a stun gun is out of it's case, its no longer a stun gun, only a generic potato gun ignition. They just work so well and can be modular to use in multiple launchers too. IANAL but If you can buy one already converted into a ignition, it shouldn't be a stun gun as there is no effective way to harm anyone with it. It's just a black box with some hookups on it at that point. I have heard of luck with piezo electric, but never tried it myself.
CannonCreations
Private 3
Private 3
Posts: 57
Joined: Fri Sep 02, 2011 9:30 am

Thu Dec 05, 2013 2:55 pm

It would be really nice if I could find something like that, but I have decided to just go with the ignition source I linked at the top. It is supposed to put out 30Kv and I think that will be enough for my needs.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Fri Dec 06, 2013 9:12 am

More than enough, though as I said if you're on a budget a simple piezo is sufficient ;)

This looks interesting: http://www.ebay.com/itm/XRS-Original-6v ... 3cd9429823
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
PeteS
Specialist
Specialist
Posts: 179
Joined: Wed Sep 11, 2013 5:53 pm
Location: Maryland
Contact:

Tue Dec 17, 2013 5:28 am

jackssmirkingrevenge wrote:More than enough, though as I said if you're on a budget a simple piezo is sufficient ;)
True. I will mention that the Vipertek stun gun (under $10) can actually be found for cheaper than I have been paying for piezo igniters.

To the OP. The one you linked should be fine, but if you want to tinker with the vipertek someone here could probably buy one for you, remove the prongs and/or otherwise disable it as a stun gun and mail you the "no longer a stun gun device".
[center]My wife upon seeing my latest hybrid and hearing an explanation of it:
"That really isn't a potato cannon anymore, is it?"
[/center]
User avatar
Zeus
Staff Sergeant
Staff Sergeant
Posts: 1505
Joined: Tue Oct 27, 2009 7:34 pm
Location: 'Straya, C*nt

Tue Dec 17, 2013 6:59 pm

FYI, a piezo is around the 10kV mark tops, but incredibly low current.
/sarcasm, /hyperbole
Post Reply